ASSEMBLY INSTRUCTIONS
Ceiling Fixture
This document provides assembly instructions for a ceiling fixture.
Installation Steps
- Remove fixture components from parts pack.
- Attach the Universal Crossbar (B) to the outlet box by using the two screws (A). The side of the Mounting plate marked "GND" must face outwards.
- Place the Canopy (C) over the Universal Crossbar (B), allowing the Metal Screw to go through the Canopy (C), then secure with Cap Nut (D).
Diagram Description
The diagram illustrates the initial assembly steps for a ceiling fixture. It depicts a Universal Crossbar (labeled B) being secured to a standard ceiling electrical box using two screws (labeled A). The diagram emphasizes that the side of the mounting plate marked "GND" (ground) must be oriented outwards. Following this, a Canopy (labeled C) is shown being placed over the Universal Crossbar (B). A central metal screw then passes through the Canopy (C) and is ultimately secured by a Cap Nut (labeled D). Electrical wires are visible, connecting the fixture to the outlet box. The diagram also shows the upper portion of the fixture stem extending downwards from the canopy.