Product Overview
This document provides assembly instructions and specifications for the Orren Ellis 54-inch Crystal Brass Rectangular Chandelier.
Specifications
Dimmability
This chandelier is fully dimmable when used with a compatible dimmer switch, allowing you to create the perfect atmosphere.
Light Source
Type of Light Source: Incandescent, LED, or CFL bulbs.
Bulb Base: G4
Maximum Wattage per Bulb: 3 watts
Bulbs are not included with the fixture.
Assembly Instructions
Refer to the diagrams for visual guidance.
Step 1: Mounting Bracket and Canopy Installation
Attach the mounting bracket (labeled 1a) to the ceiling canopy (labeled 1b) using screws (labeled 1c). The diagram shows this connection clearly. A magnified inset details a plumbing connection, which is not relevant to the chandelier assembly.
Step 2: Attaching Suspension Rods
Connect the suspension rods (labeled 5a, 5b, 5c) to the mounting bracket assembly and the main chandelier body (labeled 2). These rods are screwed into place at connection points (labeled 7) and (labeled 4).
The diagram illustrates multiple suspension rods being attached to the central structure and extending down to the chandelier body.
Step 3: Electrical Connections
Connect the electrical wires (labeled 3) from the ceiling to the chandelier's internal wiring. Inset diagrams A, B, and C show the use of wire connectors to join the wires safely. Diagram inset B specifically details the electrical wires and connectors.
Step 4: Attaching Decorative Elements and Bulb Sockets
Secure any decorative elements (labeled 10) using screws (labeled 9) and caps (labeled 8). The main chandelier body (labeled 2) contains multiple sockets for bulbs. Diagram 11 demonstrates the process of inserting a G4 bulb into its socket.
Step 5: Final Assembly View
Diagram 2 provides a view of the fully assembled chandelier hanging, showcasing its final appearance.
