MOUNTING & WIRING

Installation Instructions

Wire Connection Diagram

This diagram illustrates the wire connections required for installation:

• [Live] wire connection
• [Neutral] wire connection
• [Ground] wire connection

Note: Black wire is typically the live wire, and the white wire is the neutral wire. Ensure all wires enter the ceiling and are tightened securely.

Mounting and Wiring Steps

Please proceed in an alphabetical order for the following components:

• A. Existing Electrical BOX
• B. Crossbar
• C. Crossbar Screws
• D. Ground Wire
• E. Canopy
• F. Wire (from fixture)
• G. Junction Caps

1. Step 1: Attach Crossbar

   Attach the crossbar (B) to the existing electrical box (A) using the two crossbar screws (C). These screws are typically not supplied with the fixture and should already be present in your electrical box.

   Visual Description: Diagram shows a mounting bracket being secured to an electrical box with screws.

2. Step 2: Pass Wires and Connect

   Pass the main wire (F) and ground wire (D) through the canopy (E) and the crossbar (B). Continue until the end of the main wire (F) reaches the electrical box (A) for wiring connections.

   Visual Description: Diagram shows wires from the fixture being routed through the canopy and crossbar towards the electrical box.

3. Step 3: Secure Wiring

   When making wire connections, use electrician-approved junction caps (G). Stow any excess wire neatly within the electrical box (A).

   Visual Description: Diagram specifically shows the ground wire connection being made, and then a general illustration of wire connections using junction caps.

4. Step 4: Attach Canopy

   Raise the canopy (E) to the ceiling and attach it securely. Hold the canopy (E) in place during this step.

   Visual Description: Diagram shows the final step of attaching the canopy to the ceiling.