eufy Indoor Cam 2K Pan & Tilt
Quick Start Guide
What's Included
- eufy Indoor Cam 2K Pan & Tilt × 1
- Model: T8410
- Mounting Plate × 1
- USB Cable × 1
- USB Adapter × 1
- Mounting Screw Pack × 1
- User Manual × 1
Product Overview
eufy Indoor Cam 2K Pan & Tilt
Diagram of the eufy Indoor Cam 2K Pan & Tilt showing numbered components: 1. Lens, 2. Microphone, 3. SD card slot, 4. Status LED, 5. Speaker, 6. Power input, 7. SYNC button.
Setting Up the System
- Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
- Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the IndoorCam Pan 2K to your system.
- Follow the on-screen instructions to complete the setup.
LED Status
| LED Status | Description |
|---|---|
| Breathing blue | Ready for setup |
| Solid blue | Powered on and working properly |
| Blinking red | Disconnected from the internet |
| Blinking red once | Motion or sound detected |
| Solid red | Working properly with someone viewing the live stream or recording event |
| Solid bluish violet | System is initializing |
| Flashing blue and red alternately | Firmware upgrade in progress |
Mounting the Indoor Cam
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.
Diagrams illustrating camera placement options: one showing the camera on a table, and another showing it mounted on a wall or ceiling.
Mounting Guidelines
- Disconnect the Indoor Cam from the power outlet before mounting.
- Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. This is to avoid infrared reflection which can negatively impact night vision performance.
Diagram indicating a minimum distance of 20 cm (0.7 ft) from walls for optimal night vision performance.
Mount the Indoor Camera (Ceiling)
To mount the eufy Indoor Cam on the ceiling, follow the steps below:
- Place the positioning card against the ceiling and mark the points where drilling will be required.
- Drill holes using a 5/16" (8 mm) drill bit.
- Align the holes on the mounting plate with those in the ceiling. Insert anchors into the holes if the ceiling is made of hard materials like concrete, brick, or stucco. Secure the mounting plate to the ceiling using screws with a Phillips-head screwdriver.
- Align the grooves with the mounting plate and rotate the eufy Indoor Cam clockwise until it clicks into place.
Mounting the Indoor Cam (Wall)
To mount the eufy Indoor Cam on a wall, it is recommended to use the mounting bracket (not provided). An illustration shows the camera with a wall mounting bracket.
Powering on the Indoor Cam
Connect the eufy Indoor Cam to a power outlet using the provided USB cable and USB adapter. After powering on, the camera will connect to the system. A solid blue status LED indicates a successful connection. Rotate the camera to adjust the view and check it using the live stream in the eufy Security app.
Tip:
For troubleshooting, check "Help" in the eufy Security app. Refer to the app page for LED indicator status.
Notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Notice: Shielded Cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Importer Information (USA)
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973
European Community Compliance
CE This product complies with the radio interference requirements of the European Community.Declaration of Conformity
Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.eufylife.com/.
Product Usage and Safety Information
This product can be used across EU member states.
The product shall only be connected to a USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in environments with too high or too low temperatures, or expose it to strong sunshine or wet conditions.
The suitable temperature for T8410 and accessories is 0°C-40°C.
When charging, place the device in an environment with normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature ranging from 5°C to 25°C.
Use only the charger provided by the manufacturer. Using an unauthorized charger may cause danger and violate the device's authorization and guarantee.
This charger is for indoor use only.
Charger Type: TEKA012-0502000EU, Output: 5Vdc/2A. The plug serves as the disconnect device for the adapter.
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, maintain a 20cm distance between the device and human body.
Battery Caution
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Technical Specifications
Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 19dBm
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power: 8dBm(EIRP)
Importer Information (EU)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Recycling Information
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
♻️ This symbol means the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information, contact your local municipality, disposal service, or the shop where you bought this product.
IC Statement (Canada)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.
Customer Service
Warranty
12-month Limited Warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Social Media
- Facebook: @EufyOfficial
- Twitter: @EufyOfficial
- Instagram: eufyofficial
Company Information
Anker Innovations Limited
Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
