eufy Indoor Cam 2K Pan & Tilt
QUICK START GUIDE
What's Included
- eufy Indoor Cam 2K Pan & Tilt × 1
- Model: T8410
- Mounting Plate × 1
- USB Cable × 1
- USB Adapter × 1
- Mounting Screw Pack × 1
- User Manual × 1
Product Overview
eufy Indoor Cam 2K Pan & Tilt
The eufy Indoor Cam 2K Pan & Tilt features the following components:
- 1. Lens
- 2. Microphone
- 3. SD card slot
- 4. Status LED
- 5. Speaker
- 6. Power input
- 7. SYNC button
Setting Up the System
- Download the eufy Security app from the App Store [App Store] or Google Play [Google Play].
- Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the IndoorCam Pan 2K to your system.
- Follow the on-screen instructions to complete the setup.
LED Status
| LED Status | Description |
|---|---|
| Breathing blue | Ready for setup |
| Solid blue | Powered on and working properly |
| Blinking red | Disconnected from the internet |
| Blinking red once | Motion or sound detected |
| Solid red | Working properly with someone viewing the live stream or recording event |
| Solid bluish violet | System is initializing |
| Flashing blue and red alternately | Firmware upgrade in progress |
Mounting the Indoor Cam
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.
Diagram showing the camera placed on a table or shelf.
Diagram showing the camera mounted on a wall or ceiling.
Important Note:
- Disconnect the Indoor Cam from the power outlet before mounting.
- Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. This is to avoid infrared reflection which can have a negative impact on the night vision performance.
Diagram illustrating the minimum distance requirement: '≥ 20CM' from walls to avoid infrared reflection affecting night vision.
Mount the Indoor Camera (Ceiling Mount)
To mount the eufy Indoor Cam on the ceiling, follow these steps:
- Place the positioning card against the ceiling and then mark the points at which drilling will be required. (Illustration shows placing a positioning card against the ceiling and marking drill points.)
- Drill holes with a 5/16" (8 mm) drill bit. (Illustration shows a drill with a 5/16" (8 mm) drill bit.)
- Align the holes on the mounting plate with those in the ceiling. Insert anchors into the holes if necessary for hard materials like concrete, brick, or stucco. Secure the mounting plate to the ceiling using a Phillips-head screwdriver. (Illustration shows aligning the mounting plate with ceiling holes, inserting anchors, and securing with screws.)
- Align the grooves with the mounting plate and rotate the eufy Indoor Cam clockwise until it clicks into place.
Wall Mount
To mount the eufy Indoor Cam on a wall, it is recommended to use the mounting bracket (not provided) as illustrated. (Illustration shows the eufy Indoor Cam mounted on a wall using a bracket.)
Powering on the Indoor Cam
Connect the eufy Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the eufy Indoor Cam will connect to the system. When successfully connected, the status LED will turn solid blue. Rotate the eufy Indoor Cam to adjust the view and check it using the live stream accessible in the eufy Security app. Your eufy Indoor Cam is now ready to use.
Tip: For troubleshooting, check Help in the eufy Security app. Refer to the app page for LED indicator status.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Notice: Shielded Cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Importer Information (USA)
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973
European Community Compliance
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.eufylife.com/.
EU Usage and Safety Information
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in environments with too high or too low temperature, never expose the Device under strong sunshine or in too wet environments.
The suitable temperature for T8410 and accessories is 0°C-40°C.
When charging, please place the device in an environment with a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using an unauthorized charger may cause danger and violate the authorization of the device and the guarantee article.
This charger is for indoor use only.
The charger type is TEKA012-0502000EU, output voltage/current is 5Vdc/2A. The plug is considered the disconnect device of the adapter.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body.
Battery Caution
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Technical Specifications
- Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 19dBm
- Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power: 8dBm(EIRP)
Importer Information (EU)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Recycling Information
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol [recycle symbol description] means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Customer Service
Warranty
12-month Limited Warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Company Information
Anker Innovations Limited
Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Follow Us
@EufyOfficial (Facebook), @EufyOfficial (Twitter), eufyofficial (Instagram)
