eufy SECURITY
QUICK START GUIDE
Indoor Cam 2K Pan & Tilt
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. Document Version: V04
An illustration shows the eufy Indoor Cam 2K Pan & Tilt, a compact, dome-shaped camera with a rotating lens at the top and a speaker grille at the base.
What's Included
- eufy Indoor Cam 2K Pan & Tilt
- Model: T8410X
- Mounting Plate
- USB Cable
- USB Adapter
- Mounting Screw Pack
- User Manual
Product Overview
Diagrams show the eufy Indoor Cam 2K Pan & Tilt from the front and rear. Labeled components include: 1. Lens, 2. Microphone, 3. SD card slot, 4. Status LED, 5. Speaker, 6. Power input, 7. SYNC button.
Setting Up the System
- Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices). ?
- Sign up for a eufy Security account. Go to the app homepage. Tap "Add Device", and add the IndoorCam Pan 2K to your system.
- Follow the on-screen instructions to complete the setup.
LED Status
| LED Status | Description |
|---|---|
| Breathing blue | Ready for setup |
| Solid blue | Powered on and working properly |
| Blinking red | Disconnected from the internet |
| Blinking red once | Motion or sound detected |
| Solid red | Working properly with someone viewing the live stream or recording event |
| Solid bluish violet | System is initializing |
| Flashing blue and red alternately | Firmware upgrade in progress |
Mounting the Indoor Cam
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.
Illustration showing the camera placed on a table or shelf.
Illustration showing the camera mounted on a wall.
- Disconnect the Indoor Cam from the power outlet before mounting. ?
- Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
Diagram illustrating the recommended minimum distance of 20cm (0.7 ft) from walls for optimal night vision performance.
Mount the Indoor Camera (Ceiling)
- Place the positioning card against the ceiling and then mark the points at which drilling will be required. ?
- Drill holes with a 5/16" (8 mm) drill bit. ड्रिल
- Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillips-head screwdriver to fasten the mounting plate to the ceiling. ?
- Align the grooves with the mounting plate and rotate the eufy Indoor Cam clockwise until it clicks into place. ↩️
Mount the Indoor Camera (Wall)
To mount the eufy Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as illustrated below.
Illustration of the eufy Indoor Cam attached to a wall mount bracket, which is then affixed to the wall.
Powering On the Indoor Cam
Connect the eufy Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the eufy Indoor Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue. Rotate the eufy Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. You are now all set to use your eufy Indoor Cam.
Tip:
For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.
HomeKit Compatibility Statement
Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system.
Notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded Cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Importer Information (US)
The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
This product complies with the radio interference requirements of the European Community. ??
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/
EU Usage and Specifications
This product can be used across EU member states. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for T8410X and accessories is 0°C-40°C. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C. Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the device and the guarantee article. This charger is for indoor use only. The charger type is TEKA012-0502000EU, output voltage/current is 5Vdc/2A. The plug is considered the disconnect device of the adapter.
Battery Warning and RF Exposure
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 19dBm
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power: 8dBm(EIRP)
Importer Information (UK)
The following importer is the responsible party (contact for EU matters only):
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Recycling Information
This product is designed and manufactured with high quality materials and components, which can be recycled and reused. ♻️
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
IC Statement (Canada)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.
Customer Service
Warranty
12-month Limited Warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Social Media
[Facebook icon] @EufyOfficial [Twitter icon] @EufyOfficial [Instagram icon] eufyofficial
Company Address
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
