Buzbug MO-005B Electric Bug Zapper

Before Using Your Bug Zapper

Follow these simple steps to set up and start using your Buzbug MO-005B:

1. 0.1 Unpack Your Bug Zapper

   Carefully remove the bug zapper and all accessories from the packaging. Ensure all parts are present before proceeding.

   [Description: The device is shown being removed from its box.]

2. 0.2 Assembly

   Attach the base to the main unit. Ensure it is securely fastened.

   [Description: The circular base is shown being attached to the bottom of the main zapper unit.]

3. 0.3 Placement

   Position the bug zapper in an area where insects are most prevalent, away from direct light sources that might attract them more.

   [Description: The bug zapper is shown placed on a table in a living room setting.]

4. 0.4 Power Connection

   Plug the power cord into a suitable electrical outlet.

   [Description: The power cord is shown being plugged into the zapper and then into a wall socket.]

5. 0.5 Operation

   The bug zapper is now ready for use. The UV light will attract insects, and the internal grid will zap them upon contact.

   [Description: An internal view shows UV light attracting insects towards an electrified grid, where they are zapped and fall into a collection tray.]

Product Specifications

• Model: MO-005B
• Brand: Buzbug
• Power: 5W
• Dimensions: 15.5cm x 15.5cm x 28.5cm (approx. 6.1" x 6.1" x 11.2")
• Voltage: 220-240V ~ 50/60Hz
• Bulb Type: UV-A Fluorescent Lamp
• Coverage Area: 30-50 sq. meters (approx. 320-540 sq. ft.)

Instructions for Use

• Place the zapper on a stable, flat surface.
• Connect the unit to a power source using the provided cord.
• For maximum effectiveness, operate the zapper in a darkened environment.
• Regularly clean the insect collection tray to maintain performance.

Safety Precautions

• ⚠️ Do not touch the electric grid while the unit is plugged in.
• ⚠️ Keep out of reach of children and pets.
• ⚠️ Do not use the appliance in damp or wet environments.
• ⚠️ Always disconnect the power supply before cleaning or maintenance.
• ⚠️ Use only the power cord supplied with the unit.

Maintenance

To ensure optimal performance, clean the insect collection tray regularly. Disconnect the power cord before cleaning. The UV bulb may need replacement after a certain period of use; consult the manufacturer's guidelines for replacement procedures.

[Description: The process of removing and cleaning the collection tray is illustrated.]