Fritz Hansen AQ01 Lamp Installation Manual
Designed by Anne Quist
Installation Manual
This manual provides instructions for the installation of the Fritz Hansen AQ01 lamp series.
The AQ01 lamp is available in three models: Plug-in, Table, and Wall.
AQ01™ Plug-in
Light source: 5.5 W LED - dimmable
Cord length: 2 m / 78.74 inches
Weight: 0.5 kg / 1.1 lbs
Installation Steps:
Refer to diagrams for assembly. The plug-in model connects directly to a power source.
AQ01™ Table
Light source: 5.5 W LED - dimmable
Cord length: 2 m / 78.74 inches
Weight: 4.2 kg / 9.3 lbs
Installation Steps:
Refer to diagrams for assembly. The table model includes a base for stability.
AQ01™ Wall
Light source: 5.5 W LED - dimmable
Cord length: 2 m / 78.74 inches
Weight: 0.6 kg / 1.3 lbs
Installation Steps:
Refer to diagrams for assembly. The wall model requires mounting to a wall surface.
Technical Specifications and Dimensions
The AQ01 lamp offers adjustable arm positioning with specific angle ranges.
Dimensions:
- Arm Lengths: 450 mm, 678 mm
- Base Diameter (Table model): 211 mm
- Height (Adjustable): Varies based on configuration
- Angle Adjustments: Includes specific degree markings for articulation points (e.g., 14°, 33°, 45°, 52°, 56°, 60°).
Electrical Information:
- Light Source: 5.5 W LED, dimmable.
Maintenance and Warranty
Maintenance
- Dust with a dry, soft cloth.
- Remove stains with a soft cloth dampened in lukewarm water with a mild detergent.
- Do not use detergents containing abrasives or solvents.
Warranty
Fritz Hansen provides a limited warranty against defects in materials or workmanship for a period of two (2) years from the date of purchase.
Warranty Exclusions:
- Damage resulting from misuse or abuse.
- Lack of reasonable care.
- Affixing any attachment not provided with the product.
- Alteration of any factory-installed attachments.
- Loss of parts.
- Subjecting the fixture to electrical service other than specified.
- Damages occurring during transit.
Damage to Flexible Cable
If the external flexible cable or cord of this luminaire is damaged, it must be replaced exclusively by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
Manufacturer Information
Fritz Hansen A/S
Allerødvej 8
DK-3450 Allerød
Denmark
Contact: Tel. +45 4817 2300
Furniture, lighting and accessory design - Fritz Hansen
