Battery Modular Connectors
Brand: multicomp PRO
Product Description
The product is a contact made of copper with silver-plated finish. It accepts 6 AWG, 4 AWG and 2 AWG wire and suitable for battery modular connectors.
[Image: A silver-plated copper connector for battery modular applications.]
Specification Table
| Part Number | Products Type | Wire Size Range | Wire Strip Length |
|---|---|---|---|
| BMCMS14AG | 6 AWG | 23mm | |
| BMCMS22AG | 120 Amp Contacts | 4 AWG | |
| BMCMS38AG | 2 AWG |
Dimension Height & Width After Crimping
| BMCMS14AG | BMCMS22AG | BMCMS38AG | ||||||
|---|---|---|---|---|---|---|---|---|
| Wire Size | Height | Width | Wire Size | Height | Width | Wire Size | Height | Width |
| 6 AWG | 9.4mm | 10.52mm | 4 AWG | 9.4mm | 10.4mm | 2 AWG | 9.4mm | 11.4mm |
Method to Use
Use tool to strip a suitable length of insulation from the wire.
[Illustration showing a tool stripping insulation from a wire.]
Insert the wires (stripped end) into the terminals wire port.
[Illustration showing a stripped wire end being inserted into the terminal port.]
Use the clamps to keep pressure on the connector (terminals must be placed in the right position).
[Illustration showing clamps being used to apply pressure to secure the connector and wire.]
Done.
[Illustration showing the completed crimped connection.]
Important Notice
This data sheet and its contents (the "Information") belong to the members of the AVNET group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.
