XLR Socket - 4 Way, Left Hand Thread, Silver
Model: SVP556H-4P
Brand: Multicomp Pro
Specifications
| Connector Type | XLR |
| No. of Contacts | 4 |
| Gender | Receptacle |
| Contact Termination | Solder |
| Connector Mounting | Cable |
Standard Atmospheric Conditions
Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are:
- Between Body and Conductor: 5°C to 35°C
- Between Conductors not to be Contact: 45% to 85%
- Pressure: 86 Kpa to 106 Kpa
Test conditions without specific mention:
- Temperature: 5°C to 35°C
- Humidity: 45% to 85%
- Air pressure: 86 Kpa to 106 Kpa
Electrical Performance
| Item | Test Conditions | Performance |
|---|---|---|
| Contact Resistance | Measured at Small Current (1A Or Less), 1000Hz | <5mΩ |
| Insulation Resistance | Apply a voltage of 500V DC For 1 Min. to specified portions. Test when there are insulating parts. | 5000MΩ |
| Dielectric Strength | Input 500V DC voltage for 1 minute and test according to contact method. | 1500V@60S |
| Rated Current/Voltage | N/A | 10A/125V AC |
Component Identification
| Item | Description | Material | Plating |
|---|---|---|---|
| 1 | Insulator | PBT | - |
| 2 | Brass Shell | H62 | Nickel |
| 3 | Spring Latch | 65Mn | - |
| 4 | Push Button | ZZnAl4-1 | Nickel |
| 5 | Back Cover | PBT | - |
| 6 | Bolt | H59-1 | Nickel |
| 7 | Female Pin | Phosphor Bronze | Silver |
| 8 | Terminal | H62 | Nickel |
| 9 | Plastic Cover | PP | Nickel |
| 10 | Wire-clamp Bolt | A3 | - |
| 11 | Wire-clamp Sheet | ZZnAl4-1 | Nickel |
| 12 | Die-cast Shell | PP | Nickel |
| 13 | Boot | PVC | - |
Part Number
| Description | Part Number |
|---|---|
| XLR Socket - 4 Way Left Hand Thread, Silver | SVP556H-4P |
Important Notice
This data sheet and its contents ("Information") belong to the AVNET group of companies or are licensed to it. No license is granted for use other than for information purposes in connection with the products to which it relates. No intellectual property rights are granted. The Information is subject to change without notice and replaces all previous data sheets. While believed to be accurate, the AVNET group assumes no responsibility for its accuracy, completeness, or any use made of it. Users should verify the Information and product suitability themselves. Liability for loss or damage resulting from reliance on or use of the Information (including negligence) is excluded, except for liability for death or personal injury resulting from negligence. Multicomp Pro is a registered trademark of Premier Farnell Limited.
Find more products at:
Newark.com/multicomp-pro | Farnell.com/multicomp-pro | sg.element14.com/b/multicomp-pro
