Costway Sofa Bed HV10007 User's Manual
This instruction booklet contains important safety information. Please read and keep for future reference.
Before You Start
Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
Most board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
[Screwdriver icon] [Hammer icon] [Screwdriver icon] [Allen wrench icon]
WARNING
This product has been designed for seating three (3) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
This product is designed for home use and not intended for commercial use.
Recommended number of people needed for handling: 2 (however, it is always better to have an extra hand.)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
PARTS
- 1. Sofa Body QTY: 1
- 2. Drawer Front Panel QTY: 2
- 3. Drawer Left Side Panel QTY: 2
- 4. Drawer Right Side Panel QTY: 2
- 5. Drawer Rear Panel QTY: 2
- 6. Drawer Support Rail Panel QTY: 4
- 7. Drawer Bottom Panel QTY: 2
- 8. Leg QTY: 4
- 9. Centre Leg QTY: 1
HARDWARE
- A. Spanner M5 x 63mm QTY: 1 PC
- B. Wood Dowel M8 x 30mm QTY: 16 PCS
- C. Cam Lock M15 x 12mm QTY: 24 PCS
- D. Bolt M6 x 40mm QTY: 24 PCS
Assembly Instructions
Step 01
Attach parts 7 (x2), 8 (x4), and 9 (x1) to the Sofa Body (1) using hardware A (x1), B (x16), C (x24), and D (x24). Follow the diagram for specific placement.
Diagram shows attaching legs and center leg to the base of the sofa body.
Step 02
Attach Legs (8) to the Sofa Body (1) using hardware B (x16).
Diagram shows screwing in four legs (8) into the designated holes on the sofa body (1).
Step 03
Attach Centre Leg (9) to the Sofa Body (1) using hardware C (x24).
Diagram shows attaching the center leg (9) to the underside of the sofa body (1).
Step 04
Attach Drawer Front Panel (2) to the Sofa Body (1) using hardware A (x1), B (x8), and D (x12).
Diagram shows attaching the front panel of the drawer to the sofa body, with close-ups of dowel and bolt connections.
Step 05
Attach Drawer Left Side Panel (3) and Drawer Right Side Panel (4) to the drawer assembly using hardware A (x1), B (x4), and D (x8).
Diagram shows attaching side panels of the drawer to the front panel, with close-ups of connections.
Step 06
Attach Drawer Rear Panel (5) to the drawer assembly using hardware A (x1), B (x4), and D (x4).
Diagram shows attaching the rear panel of the drawer, with close-ups of connections.
Step 07
Assemble the drawers by connecting parts 2, 3, 4, 5, 6, and 7.
Diagram shows the assembly of two drawers, sliding parts into place and securing them.
Step 08
Secure the drawer assemblies using hardware A (x1) and C (x16).
Diagram shows securing the drawer assemblies with cam locks and bolts.
Step 09
Complete the drawer assembly by securing with hardware A (x1) and C (x8).
Diagram shows final securing of the drawers.
FUNCTIONS
The sofa bed can be converted into a bed and also features two drawers for storage. The diagrams illustrate the transformation process and the functionality of the drawers.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
Contact Us
Please give Costway a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP!
US office: Fontana | UK office: Ipswich | AU office: Truganina
Email: US:cs.us@costway.com | UK:cs.uk@costway.com | AU:cs.au@costway.com
[Facebook icon] [Pinterest icon] [YouTube icon] [Instagram icon]