Costway HU10054 House Bed Frame User Manual

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

Email: US: cs.us@costway.com, UK: cs.uk@costway.com

Before You Start

• Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
• Most board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
• Work in a spacious area, preferably on a carpet close to where the unit will be used.
• Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.

Hardware inside.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary.
• Should you choose to use polish, test first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Never use water to clean your furniture as it may cause damage to the finish.
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
• Check bolts/screws periodically and tighten them if necessary.

Further advice about wood furniture care

• It is best to keep your furniture in a climate-controlled environment.
• Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood.
• It is advised to keep furniture away from direct sunlight as sun may damage the finish.
• Proper care and cleaning at home will extend the life of your purchase.
• Following these important and helpful tips will enhance your furniture as it ages.

Part List

A Horizontal bar HB/FB - 4pcs

B Leg (Left front&Right back) - 2pcs

C Leg (Left Back&Right front) - 2pcs

D Side rail (Front Back) - 2pcs

E Upper horizontal (Front Back) - 2pcs

F Upper (Left Front) - 1pc

G Upper (Right Front) - 1pc

H Upper (Back) - 2pcs

J Upper horizontal (Middle) - 1pc

K Slat - 8pcs

Hardware List

1. (1/4")4.5*58mm Allen key (1pc)
2. (Ø15)1/4"*100mm Hex-Head bolts (14pcs)
3. (Ø15)1/4"*80mm Hex-Head bolts (8pcs)
4. (Ø12)1/4"*65mm Hex-Head bolts (6pcs)
5. 1/4"*15 (9.5mm) Horizontal-Hole bolts(22pcs)
6. Ø4*30mm Wood screws (16pcs)

ASSEMBLY TOOLS REQUIRED (NOT INCLUDED)

CAUTION: PLEASE BE CAREFUL DO NOT DAMAGE THE HOLE POSITION WHEN YOU USE POWER TOOLS !

Assembly Steps

STEP 1:

Note: Part 5 will face up with the "x" mark on it, otherwise it cannot be tightened.

(Diagram showing assembly step 1 with parts A, B, 3, 4, 5)

STEP 2:

(Diagram showing assembly step 2 with parts G, H, B, 4, 5)

STEP 3:

Note: Part 5 will face up with the "x" mark on it, otherwise it cannot be tightened.

(Diagram showing assembly step 3 with parts A, B, 3, 4, 5)

STEP 4:

(Diagram showing assembly step 4 with parts G, 3, 5, 4)

STEP 5:

(Diagram showing assembly step 5 with parts C, D, 5, 2, B, H, G, 5, 2, 1, 14PCS, 14PCS, 5, 2, E, B, 5, 5, 1, 5, 5, 2, 5, 4)

Remark: Upper horizontal (K) paste stickers

WARNING: DO NOT HANG ON THIS BAR!

STEP 6:

(Diagram showing assembly step 6 with parts G, 6, 16PCS)

Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break.

REMARK: WARNING DO NOT HANG ON THE UPPER HORIZONTAL BAR!

Assembly Information

Floor Area: 2m x 2m

Assembled by 2 Adults.

Welcome

Welcome to visit our website and purchase our quality products! With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California

UK office: Ipswich

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

5 Star Rating

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.