Igloo IGLICEBSC26 Series Self-Cleaning Ice Maker

Safety First

Your safety and the safety of others are paramount. This manual contains important safety messages. Always read and obey all safety messages.

⚠ This is the safety alert symbol. It warns of potential hazards that can cause serious injury.

Appliance Specifications: 110-120 Volts, 60 Hz, 120 Watts, 2 Amps. Refrigerant R600a. For use in 120V AC outlet only.

For the most updated manual, visit: www.nostalgiaproducts.com/user-manuals/

Important Safeguards

Read all instructions before operating. Do not touch hot surfaces. This appliance is not a toy. Supervise children and individuals with cognitive limitations. Do not immerse the cord, plug, or unit in water. Unplug when not in use, before cleaning, or before removing parts. Allow to cool before handling parts. Do not operate with a damaged cord or if the appliance malfunctions. Use only manufacturer-recommended attachments. Use only for its intended purpose. For household use only. Do not place near heat sources. Do not let the cord hang over edges. Never leave unattended. Use extreme caution when moving the unit with hot contents. Always attach the plug to the appliance first, then plug into the wall outlet. To disconnect, turn controls to "off" then remove the plug.

Additional Safeguards: Do not touch the Evaporator during operation (risk of burns). Do not use flammable liquids for cleaning. Check the ice hopper for foreign objects. Do not turn the unit upside down while in use or filled with ice.

Electrical Cord and Plug: The appliance has a 3-prong plug for electrical shock risk reduction. A short power cord is provided to prevent entanglement. If using an extension cord, ensure its electrical rating is at least as great as the appliance's and that it does not create a tripping hazard. Use is not recommended in countries without 120V AC support.

Introduction

Congratulations on your new Igloo® Self-Cleaning Ice Maker! This stylish and portable appliance makes ice accessible anywhere. Its intuitive design allows you to start making ice cubes shortly after plugging it in. It's perfect for kitchens, RVs, clubhouses, home bars, and more.

Key Features:

• Makes up to 26 lbs. of ice per day
• Produces 9 ice cubes every 7-15 minutes
• Water tank capacity: 1.5 quarts
• Ice basket capacity: 1.5 pounds
• Multiple ice cube sizes: small and large
• Control panel with LED indicator lights
• Compact and elegant design
• Transparent lid for easy viewing
• Removable ice basket
• Includes ice scoop
• Refrigerant: R600a

Parts & Assembly

Before first use, remove all packaging and follow the cleaning steps.

Main Components:

• LED Control Panel
• Ventilation
• Water Drain Plug
• Ice Scoop
• Clear Lid
• Water Reservoir
• Ice Basket

Control Panel Indicators:

• Cleaning Indicator Light
• Small Ice Indicator Light
• Large Ice Indicator Light
• "Select" Function Button
• Add Water Indicator Light
• Ice Full Indicator Light
• Power On Indicator Light
• Power Function Button

How to Operate

Before First Use: Follow cleaning instructions. Place the unit on a flat, level surface away from direct sunlight and heat sources. Ensure at least four inches of clearance on all sides. Allow one hour for refrigerant to settle before plugging in.

Using Your Ice Cube Maker:

1. Open the lid, remove the ice basket, and pour water into the reservoir, keeping it below the MAX level. Drain excess water if needed via the drain plug.
2. Press the POWER button to start the ice-making cycle.
3. Select the desired ice cube size using the SELECT button. Small cubes are recommended if the room temperature is below 60°F (16°C) to prevent sticking.
4. Ice-making cycles last 6-15 minutes, varying with cube size and ambient temperature.
5. The "Add Water" light will illuminate if the water pump cannot draw water; the unit will stop automatically.
6. If the water level is low, turn the unit OFF, refill to the MAX level, and turn it back ON.
7. The unit stops automatically when the ice basket is full, indicated by the "ICE FULL" light.
8. Change water in the reservoir every 24 hours for hygiene. Drain if not in use.

Important Note: If power is disconnected during operation or indicator lights blink, press POWER to stop, unplug the unit, let it rest for a few minutes to warm up and allow ice to fall from the evaporator. Empty the water tray and wait three minutes before restarting.

⚠ Do not touch the Evaporator during operation or ice making, as this can cause severe burns.

Helpful Tips

Add Water Indicator: Turn off, add water, restart. Or remove excess ice from the basket.

Ice Cubes Sticking Together: If the cycle is too long, stop and restart when cubes melt. Select smaller cubes. Ensure water temperature is between 45°F - 90°F.

Ice Maker Not Working: If the unit runs but produces no ice, check ambient and water temperature. The environment should be below 90°F. Try using colder water (45°F - 90°F). If issues persist, check for refrigerant leaks or blocked cooling system pipes.

LED Lights Blinking: May indicate a power interruption. Press POWER to stop the cycle, unplug, wait a few minutes for the unit to warm up and release ice, empty the water tray, and wait three minutes before restarting.

Cleaning & Maintenance

Your ice maker has an automatic cleaning function. Follow these steps for maintenance:

1. Remove the ice basket and drain any remaining water via the bottom drain plug. Replace the plug.
2. Prepare a cleaning solution: Vinegar and water (1:1), Lemon and water (1:1), or a commercial ice maker cleaner.
3. Ensure the unit is plugged in and the POWER light is off. Add the cleaning solution to the water reservoir.
4. Press SELECT until the CLEAN indicator light is illuminated. The unit will automatically cycle the solution 5 times.
5. After cleaning, drain the interior water via the drain plug and replace it.
6. Clean the interior and exterior with warm, soapy water and a non-abrasive towel.
7. Drain any remaining water and dry thoroughly with a towel.
8. Before storing, keep the clear lid open and allow the unit to air dry completely for 24 hours.

Recipes

Use your ice maker to create these refreshing beverages:

• Muddy Water: Fill glass 1/4 with ice. Add orange juice to half-full, then cola to fill. Stir.
• Roy Rogers: Fill glasses with ice. Add cola and grenadine. Stir. Garnish with a maraschino cherry.
• Strawberry Lemonade: Blend 8 halved strawberries with 2 tbsp sugar and 1 cup water until juiced. Combine strawberry juice, 6 cups water, 1 cup sugar, and lemon juice in a pitcher. Stir. Fill glasses with ice and pour lemonade. Garnish with lemon slice and mint leaves.
• Ginger Beer Mojito Mocktail: Muddle mint and lime juice in a glass. Fill with ice. Add ginger beer. Stir. Garnish with mint and lime.
• Blackberry Basil Iced Tea: Combine 6 cups water, 4 black tea bags, 340g blackberries, and 8-12 basil leaves in a pitcher. Refrigerate for 12-24 hours. Remove tea bags, add sweetener to taste. Fill glasses with ice and pour iced tea.

Returns & Warranty

If your unit is not working or is damaged upon arrival, return it to the place of purchase immediately.

For questions, contact Nostalgia Products LLC Customer Service at (833) 258-4210 or visit www.nostalgiaproducts.com.

Product Warranty Terms: Nostalgia Products LLC warrants this product for one (1) year from the date of original purchase against defects in material and workmanship under normal home use, provided it is operated and maintained according to instructions. The company will, at its discretion, repair or replace defective products or issue a refund. This warranty is valid only for the original retail purchaser with proof of purchase (sales receipt). Claims must be made within the warranty period and no later than 30 days after the issue arises. The warranty does not cover normal wear and tear, damage from shipping, misuse, accidents, alterations, or improper parts. Return shipping costs are the customer's responsibility and are non-refundable. This warranty applies to indoor household use only. Warranty is valid in USA and Canada.

This warranty is in lieu of all other warranties. The company is not liable for indirect, incidental, consequential, or special damages. Some states may not allow these limitations.

Failure to comply with operating instructions will void the warranty.

For more information, visit www.nostalgiaproducts.com. Connect on Facebook, Pinterest, and Twitter.