Karcher VC 6 Cordless ourFamily Quickstart

Step 1: Attach accessories using a drill (if needed). Dimensions: 0.83-0.85 m height, 0.23 m accessory length.

Step 2: Connect the main unit to the floor nozzle. Ensure it clicks into place.

Step 3: Connect the handle to the main unit. Ensure it clicks into place.

Step 1: Attach the floor nozzle to the extension tube. Ensure it clicks.

Step 2: Attach the extension tube to the main unit. Ensure it clicks.

Step 3: Connect the handle to the extension tube. Ensure it clicks.

Step 1A: Connect the charging adapter to the battery and then to a power outlet. Battery shows 0% charge.

Step 1B: Charging indicator shows progress. Approximately 220 minutes for 100% charge. Charging time is 2 minutes for initial use.

Step 2A: Connect the charging adapter to the battery pack and then to a power outlet. Battery shows 0% charge.

Step 2B: Charging indicator shows progress. Approximately 220 minutes for 100% charge. Charging time is 2 minutes for initial use.

Step 1: Press the 'ON' button (A) to start the vacuum. The indicator light turns on.

Step 1A: Press the 'ON' button (A) to start the vacuum.

Step 1B: The vacuum is now ON.

Step 2: To activate 'BOOST' mode, press the button indicated. The display shows 'BOOST'.

Step 1: Press the 'OFF' button (A) to turn off the vacuum. The indicator light turns off.

Step 2: To empty the dust container, detach it and empty its contents into a bin.

Step 1A: Remove the dust container for cleaning.

Step 2: Clean the dust container. Allow it to dry for 24 hours.

Step 1B: Attach the crevice nozzle. Detach the dust container. Store the vacuum and accessories in a dry place.

Step 2: Connect the crevice nozzle to the main unit.

Step 3: Place the unit into its storage box.

Step 4: Attach the handle.

Step 5: Connect the floor nozzle.

Step 6: Attach the extension tube.

Step 7: Secure the battery.

Step 8: The vacuum is ready for storage.

Step 9: Attach the main unit to the extension tube.