Amazon Basics Hat and Coat Stand Rack
Important Safety Instructions
Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury, including:
⚠️ CAUTION Risk of injury!
- The product can tip over. Do not let children climb on or play with the product.
- For domestic use only.
- This product must be assembled by an adult.
- Keep children and pets away while assembling the product.
- Always use the product on a firm, level ground.
- Do not use this product if any parts are missing, damaged, or worn.
- To avoid scratching the floor, assemble the product on a soft surface, such as a carpet.
- Do not overtighten the fasteners.
- Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
⚠️ DANGER Risk of suffocation!
- Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
Before First Use:
- Check the product for transport damages.
- Remove all the packing materials.
Cleaning and Maintenance
- To clean the product, wipe with a soft, slightly damp cloth.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
- Regularly check that all the components and fasteners are tightened.
- Store the product in a cool and dry place away from children and pets, ideally in its original packaging.
- Avoid any vibrations and shocks.
Specifications
- Net weight: approx. 12.00 lbs (5.45 kg)
- Dimensions: approx. 11.6 x 11.6 x 65.7 inches (29.5 x 29.5 x 167 cm) (W x H x D)
- Loading Capacity: 33.04 lbs (15 kg)
Assembly Instructions
Delivery Content:
- Part A: Main Pole (x1)
- Part B: Base Cross Piece (x1)
- Part C: Coat Hook (x4)
- Part D: Base Cross Piece (x1)
- Part E: Pole Section (x1)
- Part F: Base Disc (x1)
- Part G: Screw (x3)
- Part H: Allen Key (x1)
- Part I: Screw (x8)
- Part J: Screw (x3)
- Part K: Screw (x1)
Assembly Steps:
- Assemble the Base: Attach the Base Disc (F) to the bottom of the Pole Section (E) using three Screws (G) and the Allen Key (H). Then, attach the two Base Cross Pieces (B and D) to the bottom of the Pole Section (E) using one Screw (K) for each.
- Connect Middle Pole: Connect the Main Pole (A) to the top of the Pole Section (E) using three Screws (J).
- Attach Top Section: Connect the top pole section to the Main Pole (A) using three Screws (J).
- Attach Coat Hooks: Secure the four Coat Hooks (C) to the top section of the stand, using two Screws (I) for each hook.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
amazon.co.uk/review/review-your-purchases
If you need help with your Amazon Basics product, please use the website below.
Product Information
Made in China
Amazon Sign In
Amazon.it
Amazon Sign-In
Amazon.co.jp | Books, Apparel, Electronics, Groceries & more
