Amazon Basics 2-Tier Wooden Shoe Rack

Important Safety Instructions

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury, including the following:

• This product must be assembled by an adult. [Keep children away while assembling the product.]
• Always use on a firm, level ground.
• Do not stand on the product.
• Regularly verify that all the components and fasteners are secure. Do not overtighten the fasteners.
• Do not use this product if any parts are missing, are damaged or worn.
• To avoid scratching the floor, assemble the product on a soft surface, such as a carpet.
• Regularly examine the product for wear and tear. Replace at first sign of damage or if parts become detached.
• Only users up to 120 kg (265 lbs) can sit on this product.

⚠️ Risk of Suffocation!

• Keep any packaging materials away from children - these materials are a potential source of danger, e.g. suffocation.

Before First Use

• Check the product for transport damages.
• Remove all the packing materials.

Cleaning and Maintenance

Cleaning

• To clean the product, wipe with a soft, slightly damp cloth.
• Vacuum the product regularly. Small dust particles are very abrasive and can wear furniture prematurely.
• Clean spills immediately to prevent staining. If necessary, gently wipe away the spill using a soft, clean cloth dampened with lukewarm water. Allow to dry and brush lightly.
• If you choose to use a professional cleaning product, pretest the fabric in an inconspicuous area for any signs of discoloration or shrinking.
• Marks and stains from pens, crayons and ink markers are difficult to remove. If the product becomes permanently stained, consult a professional.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• Avoid placing the product in direct sunlight as colour may fade over time.
• Try to maintain at least 1 meter (approx. 3.3 feet) between the product and any heat sources. Prolonged exposure to heat sources or radiators may cause glazing, melting and scorching, or even cause colour to fade.
• Regularly check that all the components and fasteners are tightened.
• Store the product in a cool and dry place away from children and pets, ideally in its original packaging.

Specifications

Net weight: approx. 25 lbs (11.33 kg)

Dimensions (W x H x D): approx. 23.62 x 17.2 x 11.87 inches (60 x 44 x 30 cm)

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.

amazon.co.uk/review/review-your-purchases#

If you need help with your Amazon Basics product, please use the website or number below.

amazon.co.uk/gp/help/customer/contact-us

Assembly Instructions

Tools Needed ?

• Hex Key (included)
• Screwdriver (not included)

Delivery Content ?

Check that you have all the parts listed below:

• Part A (Top Panel) (x1)
• Part B (Side Panel) (x2)
• Part C (Back Panel) (x1)
• Part D (Shelf) (x2)
• Part E (Front Base Panel) (x1)
• Part F (Rear Base Panel) (x1)
• Part G (Bottom Panel) (x1)
• Part H (Divider) (x1)
• Fastener I (Cam Lock Screw) (x13)
• Fastener J (Cam Lock) (x17)
• Fastener K (Dowel) (x13)
• Hinge L (x2)
• Screw M (for hinges) (x12)

Assembly Steps

Step 1

Insert dowels (K) into parts B (x2) and D (x2). Insert cam lock screws (I) into parts B (x2), D (x2), E (x1), F (x1), G (x1), and H (x1).

Diagram Description: Shows dowels (K) being inserted into side panels (B) and shelves (D). Shows cam lock screws (I) being screwed into various panels (B, D, E, F, G, H).

Step 2

Connect one side panel (B) to the front base panel (E) and a shelf (D) using cam locks (J). Turn the cam locks clockwise to secure. Repeat for the other side panel (B) and the second shelf (D).

Diagram Description: Shows one side panel (B) being connected to the front base panel (E) and a shelf (D) using cam locks (J). A magnified view shows how to insert and turn the cam lock. This step is repeated for the other side.

Step 3

Connect the other side panel (B) to the second shelf (D) and the rear base panel (F) using cam locks (J).

Diagram Description: Shows the other side panel (B) being connected to the second shelf (D) and the rear base panel (F) using cam locks (J).

Step 4

Insert the divider (H) into the designated slots on the shelves (D) and base panels (E, F). Secure the divider (H) to the side panels (B) using cam locks (J).

Diagram Description: Shows the divider panel (H) being slid into place between the shelves and base panels. It is then secured to the side panels (B) with cam locks (J). Arrows indicate the sliding motion.

Step 5

Attach the back panel (C) to the assembled frame. Secure with cam locks (J).

Diagram Description: Shows the back panel (C) being placed onto the rear of the unit. Cam locks (J) are used to secure it to the side panels (B), shelves (D), and base panels (E, F).

Step 6

Attach the bottom panel (G) to the base of the unit. Secure with cam locks (J).

Diagram Description: Shows the bottom panel (G) being attached to the underside of the unit. Cam locks (J) are used to secure it to the side panels (B) and front/rear base panels (E, F). Arrows indicate downward placement.

Step 7

Attach hinges (L) to the front base panel (E) using screws (M).

Diagram Description: Shows hinges (L) being screwed onto the front base panel (E) using screws (M).

Step 8

Attach the top panel (A) to the main body. Secure with screws (M) through hinges (L) and cam locks (J).

Diagram Description: Shows the top panel (A) being placed on top of the unit. A magnified view shows screws (M) attaching the hinges (L) to the top panel (A), and cam locks (J) securing the top panel to the side panels (B).

Step 9

The assembly is now complete. The 2-Tier Wooden Shoe Rack is ready for use.

Diagram Description: Shows the fully assembled 2-Tier Wooden Shoe Rack.

Made in China

The product is manufactured in China.

Product Disposal

When disposing of this product, follow the guidelines of your local municipality and facilities for each part. ♻️