Product Introduction
Thank you for purchasing WEEFINE products! WEEFINE is committed to improving convenience and reliability through innovative design and ease of use that cater to the usage habits of both professional and amateur photographers. Mobile phones are becoming the most commonly used photography devices. The WEEFINE WFH07 Smart Housing, with its rich functions and professional software and hardware design, creates an excellent underwater photography experience for you. All important function operations of each WFH07 are strictly inspected and hydraulically tested to ensure stable and reliable quality. Please read this manual carefully before using the product, as it will maximize its performance and lifespan.
Technical Parameters
| Parameter | Specification |
|---|---|
| Compatible phones size | Within 163.5(L) x 82(W) x 10.6(H) mm + 7mm(Lens) |
| Depth Rating | 80m / 262Ft |
| Battery | Built-in Lithium Battery |
| Charger | TYPE-C input |
| Running time | Work running time > 24 Hours, Standby time > 100 days |
| Times of vacuumizing | >100 number of times |
| Material | Aluminum with Type II Anodizing and Optical Grade Polycarbonate Resin |
| Dimension | 238.5(L) x 119(W) x 76(H) mm |
| Weight | 1150g (Air) / 100g (Underwater) |
Housing Operation
Opening & Locking
Opening the Housing
Pull the lock plate safety buckle outward and twist the lock plate towards the Open direction until the back cover is fully opened.
Locking the Housing
Align the lock plate latch with the lock column on the transparent back cover of the housing, twist the lock plate towards the Lock direction until the safety buckle of the lock plate clicks and the housing locks.
Placing the Phone
Place the back of the phone facing down and push the phone's clip until the phone is flat and inserted.
Note: The top of the phone should not overlap with the rubber protective buckle on the left side of the Smart Housing to avoid damaging the phone when closing it.
Product Information
The WFH07 housing features several components labeled in the diagrams:
Figure 1: Main Housing Components
- 1: Lens window
- 2: Exhaust valve
- 3: Hand rope hole
- 4: Lock plate
- 5: Lock plate safety buckle
- 6: Wheel
- 7: Shutter
- 8: Fiber optic port
- 9: Exhaust valve latch
- 10: Exhaust valve safety lock
- 11: Hot shoe / Tray base
Figure 2: Back Window Components
- 12: Back window
- 13: Fixed seat
- 14: Up key
- 15: Down key
- 16: Left key
- 17: Right key
- 18: Menu
Figure 3: Internal Components
- 19: Phone's clip
- 20: Charging port
- 21: DiveIT APP QR code
- 22: Indicator light
Packing List
- WFH07 Housing x1
- Spare O-ring x1
- USB-C cable x1
- User Manual x1
- Allen Key x1
- Silicon grease x1
- Removal tool x1
- Shutter extension lever x1
- Lanyard x1
- Clean cloth x1
Operation & Connectivity
Powering On/Off
- Turn On: Push and hold the Shutter button for 3 seconds.
- Turn Off: Push and hold the Menu key for 3 seconds.
Connecting to the Smart Housing
Scan the QR code (21) inside the Smart Housing to download and install the DiveIT App for registration. After opening the App and turning on the Smart Housing, the phone and the Smart Housing will be automatically connected via Bluetooth.
Indicator Light Status (Bluetooth Connection):
- Connected: Green light goes on.
- Not Connected: Green light flashing.
Note: Valve Pump function will be disabled when the battery level is below 20%.
Button Vibration Effect
Push and hold the Right key (17) for 3 seconds to enable or disable the button vibration effect.
Exhaust Valve Operation
Opening the Valve
While pressing the safety lock of the red exhaust valve (2), pull the exhaust valve latch (9) in the direction of the arrow [arrow pointing outwards] until the exhaust valve is completely ejected and the valve opens.
Closing the Valve
Press the exhaust valve (2) firmly until the latch (9) is marked with a [checkmark symbol] and the valve is closed with a "click" sound.
Note:
- Before closing the back cover of the housing, please open the exhaust valve to smoothly close the housing.
- Please open the exhaust valve during transportation to maintain the balance of air pressure inside and outside the housing and avoid damaging components.
- Before diving, the exhaust valve must be closed to avoid water ingress.
- After diving, it is necessary to blow dry/wipe off the water around the valve before opening it to prevent water droplets from being sucked into the housing.
General Maintenance & Charging
Maintenance
- Soak the housing in freshwater for a minimum of 30 minutes after diving.
- If the housing is not going to be used for a long time, please store it with approximately 70% battery capacity.
- The battery needs to be recharged fully every 6 months to prolong its lifespan.
- There is an O-ring on the case; silicon grease should be used to keep the O-ring well lubricated. If the O-ring is cracked, hardened, damaged, or deformed, it should be replaced in time.
- Do not use sharp tools to remove the O-ring.
Charging
Inserting a Type-C cable into the charging port (20) takes less than 3 hours to fully charge.
Indicator Light Status (Charging):
- Charging in progress: Red light.
- Battery fully charged: Green light.
FCC Compliance Information
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
