Product Overview
The CTEK TIME TO GO CT5 is a user instruction battery charger designed for efficient and safe charging of various 12V lead-acid batteries. It features multiple charging modes and indicators to guide the user.
Safety Instructions
⚠️ Important: Always read and understand the safety instructions before operating the battery charger. These instructions are provided in multiple languages for your convenience.
The safety instructions cover essential guidelines to ensure safe operation and prevent damage to the charger or battery.
User Manual Languages
The user manual for this battery charger is available in the following languages:
- English
- German
- French
- Spanish
- Italian
- Dutch
- Swedish
- Danish
- Norwegian
- Finnish
- Portuguese
- Polish
- Russian
- Turkish
- Chinese
- Japanese
- Czech
- Croatian
- Hungarian
- Greek
- Thai
- Arabic
- Hebrew
Charger Operation and Indicators
The CTEK TIME TO GO CT5 charger provides clear indicators and modes for operation:
Battery Connection
Connect the charger to your 12V or 24V battery. Attach the red clamp ? to the positive (+) terminal and the black clamp ⚫ to the negative (-) terminal of the battery. Ensure a secure connection.
Charging Status Indicators
- More than X hours of charge time left: Indicates that the charging process will take longer than X hours.
- Battery ready to use: Signifies that the battery is sufficiently charged for normal use.
- Fully charge/maintenance charge: Shows that the battery is fully charged and may be in a maintenance charging phase.
- Battery ready to crank once: Indicates the battery has enough charge for a single engine start.
Charger Modes
Select the appropriate mode using the MODE button. The PROGRAM button allows for specific program selection.
NORMAL: Standard charging mode for most 12V lead-acid batteries.
AGM: Optimized charging for AGM (Absorbent Glass Mat) batteries.
RECOND: A deep reconditioning mode for batteries that require a boost or desulfation.
PROGRAM: Allows selection of specific charging programs, often indicated by the 'PROGRAM' label.
Indicator Lights
- ERROR LAMP ❌: Illuminates if an error occurs during charging. Consult the manual or FAQ for troubleshooting.
- POWER LAMP ?: Indicates that the charger is connected to the mains power supply.
- BMS: Battery Management System indicator.
- FAQ: Indicates that further information can be found in the Frequently Asked Questions section or online.
For detailed troubleshooting and FAQs, visit www.ctek.com.
Battery Voltage Detection
The charger can detect battery voltages as low as <2V, indicating its ability to attempt charging even deeply discharged batteries.
Included in Package
- CTEK TIME TO GO CT5 Battery Charger
- Battery Clamps (Red and Black)
- User Manual
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | 1075 |
| Input | 220–240VAC, 50–60Hz, 0.6A |
| Output | NORMAL 14.4V/5.0A, AGM 14.7V/5.0A, RECOND 15.8V/1.8A |
| Back current drain* | Less than 1.5Ah/month |
| Ambient temperature | -20°C to +50°C (-4°F to 122°F) |
| Battery types |
|
| Battery capacity | 20–160Ah |
| Insulation class | IP65 |
| Warranty | 5 years |
| Temperature Compensation | Built-in charge voltage compensation according to ambient temperature. |
*Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Warranty and Support
Limited Warranty: CTEK provides a limited warranty to the original purchaser, covering manufacturing faults and material defects for 5 years from the date of purchase. The warranty is void if the charger is opened, mishandled, or repaired by unauthorized personnel. CTEK is not liable for consequential damages.
Support: For support, FAQs, the latest manual, and more information about CTEK products, please visit www.ctek.com.
CTEK - Maximizing Battery Performance | ctek.com
CTEK - Maximizing Battery Performance | ctek.com
