Important Safety Instructions

[Warning: Risk of Electric Shock] Do not open. No user-serviceable parts inside. Refer servicing to qualified personnel.

[Caution: Important Information] The exclamation point within an equilateral triangle alerts the user to important operating and maintenance instructions.

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

[Warning: Electric Shock Hazard] Do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

[Warning: Laser Hazard] Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam.

This equipment is a Class II or double insulated electrical appliance. It does not require a safety connection to electrical earth.

1. Read all safety and operating instructions before operating.
2. Keep these instructions for future reference.
3. Heed all warnings on the appliance and in the operating instructions.
4. Follow all operating and use instructions.
5. Do not use this apparatus near water (e.g., wet basement, swimming pool).
6. Clean only with a dry cloth.
7. Do not block ventilation openings. Install according to manufacturer's instructions.
8. Do not install near heat sources (radiators, stoves, etc.).
9. Do not defeat the safety purpose of the polarized or grounding plug. Consult an electrician if the plug does not fit your outlet.
10. Protect the power cord from being walked on or pinched.
11. Use only manufacturer-specified attachments/accessories.
12. Use only with a specified cart, stand, tripod, bracket, or table. Use caution when moving cart/apparatus combinations to avoid tip-over injury.
13. Unplug during lightning storms or when unused for long periods.
14. Refer all servicing to qualified personnel.

[Warning: French] AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

The mains plug is used as a disconnect device; the disconnect device shall remain readily operable.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.

The use of the equipment in moderate climate.

The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

The symbol with [AC Voltage] indication.

The symbol with [DC Voltage] indication.

Attention should be drawn to the environmental aspects of battery disposal.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Accessories Included:

• REMOTE CONTROL
• RCA TO 3.5MM AUX CABLE
• INSTRUCTION MANUAL
• WARRANTY (BACK OF MANUAL)
• 45 RPM ADAPTER
• 8GB USB THUMB DRIVE
• 3 REPLACEMENT TURNTABLE NEEDLES
• 1 LP CLEANING CLOTH

Product Overview

The Victrola 8-in-1 Nostalgic Entertainment Center offers versatile playback options including a 3-speed turntable, CD/MP3 player, cassette player, AM/FM radio, Bluetooth connectivity, USB playback, and USB recording.

Front View Description: Features include the turntable platter, tone arm, control panel with display, buttons for mode selection (PHONO, CD/USB, TAPE, AM/FM, AUX/BLUETOOTH), volume knob, tuner knob, power button, eject button, headphone jack, and USB jack.

Rear View Description: Includes FM wire antenna, AUX-IN jacks (front and rear), and AC power cord connection.

Turntable Parts:

• A. Turntable
• B. Safety Screw (for transport)
• C. Speed Selector
• D. Tone Arm holder
• E. Tone Arm
• F. Stylus
• G. 45 RPM adaptor
• H. Cue-lever

Setup / Basic Operation

Setup:

1. Remove white protective needle cover by gently pulling towards the front of the unit.
2. Remove any packaging materials.
3. Connect the AC power cord to a wall outlet.

Note: To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation:

1. Press the POWER button to turn the unit on.
2. Select the source by pressing the corresponding mode button (AUX/Bluetooth, PHONO, CD/USB, TAPE, AM/FM).
3. Rotate the VOLUME knob to adjust the sound level (00-30, 30 is max volume).

Listening through Earphones/Headphones (not included):

Reduce volume to minimum, insert headphone plug into the HEADPHONE jack, then adjust volume up using the VOLUME knob. The unit's speakers will automatically deactivate when headphones are plugged in.

Condensation Warning: When the unit is moved from a cold to warm place, or after a sudden temperature change, allow the unit to stabilize for 1-2 hours after plugging it into an AC outlet to prevent condensation and ensure proper operation.

Remote Control

Point the remote control towards the remote sensor on the front panel of the unit. Operation may be affected by obstacles or other devices emitting infrared rays.

Battery Installation:

1. Remove the battery compartment cover.
2. Insert 2x "AAA" batteries (not included), ensuring correct polarity (+/-).
3. Replace the battery compartment cover.

Battery Precautions:

• Use batteries of the same type; do not mix types.
• Remove batteries if not using the unit for over a month.
• Do not heat, disassemble, or dispose of batteries in fire.
• Dispose of batteries responsibly at recycling sites, following local regulations.

Remote Control Button Functions:

• MUTE: Mute/unmute audio.
• REPEAT: Select repeat mode (Repeat 1, Repeat Folder, Repeat All) for CD/MP3 CD or USB.
• PROGRAM: Program tracks for CD/MP3 CD or USB.
• PHONO: Selects vinyl record playback.
• RADIO: Selects AM/FM radio.
• Bluetooth [symbol]: Connects to external Bluetooth devices.
• TAPE: Selects cassette tape playback.
• STOP [symbol]: Stops playback or recording.
• Previous / Next Track & Rewind / FF [symbols]: Navigate tracks, fast forward/rewind. Pressing [symbol] once restarts the current track; twice goes to the previous track. Press and hold for fast forward/rewind.
• PLAY/PAUSE [symbol]: Starts or pauses playback.
• Folder down & Folder up [symbols]: Select desired folder in MP3 CD or USB mode.
• OPEN/CLOSE [symbol]: Opens/closes the disc tray.
• DELETE: Deletes USB tracks.
• SHUFFLE: Plays tracks in random sequence for CD/MP3 CD or USB.
• CD/USB: Selects CD or USB mode.
• AUX: Selects AUX-IN input.
• RECORD: Enters record mode.
• VOL+ / VOL-: Adjusts volume.

Listening to a Vinyl Record

1. Press the "PHONO" selector button.
2. Gently open the top cover.
3. Place a vinyl record on the turntable. Use the 45 RPM adapter if needed.
4. Select the appropriate speed (33-1/3, 45, or 78 RPM).
5. Gently push the tone arm clip to the right to release the tone arm.
6. Raise the cue lever to lift the tone arm off its support.
7. Move the tone arm to the edge of the record. The turntable will begin to turn.
8. Gently lower the tone arm by slowly releasing the cue lever.
9. When the record ends, lift the tone arm manually and place it on the rest.

Important: Closing the top cover helps prevent dust. Always relock the tone arm clip before transporting. Do not place anything on the turntable cover while playing a record.

Listening to a CD/MP3 CD

1. Press the "CD/USB" button to select CD mode. The display will show "CD".
2. Press the EJECT [symbol] to open the disc tray.
3. Place a disc on the tray with the printed label facing up.
4. Press the EJECT [symbol] to close the tray.
5. The unit will display "READ" and then the number of tracks.
6. Press the PLAY/PAUSE [symbol] to begin playback.
7. To pause, press PLAY/PAUSE [symbol] again. Press again to resume.
8. To skip tracks, use the [Previous Track] or [Next Track] buttons. Pressing [Previous Track] once restarts the current track; twice goes to the previous track.
9. To fast forward/rewind within a track, press and hold the corresponding skip button.
10. To stop playback, press the STOP [symbol] button.
11. For MP3 CDs, use the Folder up/down buttons to choose folders.

Important:

• Never place more than one disc on the tray.
• Place the disc in the center of the tray.
• Do not push the CD tray; use the OPEN/CLOSE button.
• Allow a moment for the unit to load the disc.

Repeat Playback:

Press the REPEAT button to cycle through REPEAT 1 (one track), REPEAT FOLDER (for MP3 CDs), or REPEAT ALL (entire CD/MP3 CD). Repeat mode cancels if other function buttons are pressed.

Shuffle Playback:

Press the SHUFFLE button to play tracks in a random sequence. Shuffle mode cancels if other function buttons are pressed.

Programmed Playback (CD/MP3 CD)

Program up to 20 tracks for CD or 99 tracks for MP3 disc.

1. Press "CD/USB" to select CD mode and load a CD.
2. While stopped, press the PROGRAM button. "PROGRAM" indicator blinks, "P01" appears.
3. Use [Previous Track] or [Next Track] buttons to select a track number.
4. Press PROGRAM again to set the track. "P02" appears. Repeat for additional tracks.
5. Press PLAY [symbol] to start program playback.
6. To cancel, press STOP [symbol].

To check programmed order, press [Previous Track] or [Next Track] repeatedly in stop mode.

To add a track, press PROGRAM in stop mode, select track, then press PROGRAM again.

To clear programmed order, press STOP or other function buttons (OPEN/CLOSE, POWER, etc.).

Listening to the Radio

1. Press the "AM/FM" button. Press again to switch between AM and FM.
2. Tune to the desired station using the Radio Tuner Knob.

Note: In FM Mode, the "TUNED/ST" indicator lights up red for stereo reception.

Adjusting for Best Reception: AM broadcast: Rotate the unit. FM broadcast: Extend and reposition the FM antenna.

Listening to an External Audio Device (AUX Mode)

Play audio from external sources like iPod, MP3 Player, or Portable CD Player.

Use the front AUX-IN jack with a 3.5mm cable for devices with headphone jacks. Use the rear AUX-IN jacks (red/white) for devices with RCA connections.

1. Plug one end of the AUX-IN cable into the unit's AUX-IN jack.
2. Plug the other end into the external audio source's headphone jack or RCA jacks.
3. Press "AUX/Bluetooth" button to select AUX-IN function. "AUX" will appear on the display.
4. Turn your external device on to playback.
5. Rotate the VOLUME knob to adjust sound level.
6. Adjust volume on your external device if necessary.
7. Control playback using your external device.

Note: If both front and rear AUX-INs are connected, only the front one is active.

Listening to an External Audio Device (Bluetooth Mode)

Enjoy music from external devices with Bluetooth capability.

Getting Connected Using Bluetooth:

1. Press "AUX/Bluetooth" button twice to select Bluetooth mode. The display will show [Bluetooth symbol].
2. Enable Bluetooth on your external device and search for devices.
3. Select "Victrola" or "Wooden Music Center" from the paired devices list.
4. If a password is required, enter "0000".
5. A series of tones will indicate a successful connection.

Note: Effective distance is 10 meters (33 ft).

Enjoy Music:

1. Pair your external device.
2. Turn on the music player program on your external device and set it to play.
3. Control playback using the unit's PLAY/PAUSE or track navigation buttons. Some functions may vary depending on the music player program.

Listening to a Cassette Tape

1. Load an audio cassette tape into the unit. Playback will begin automatically.
2. Press the cassette button halfway to fast forward. Press lightly to resume playback.
3. Press the cassette button completely down to end playback and eject the tape.

USB Memory Stick Playback

1. Press "CD/USB" button repeatedly to switch to USB mode. "USB" will appear on the display.
2. Connect the USB memory stick into the USB slot. The number of tracks will display.
3. Press the PLAY/PAUSE [symbol] to begin playback.
4. To pause, press PLAY/PAUSE [symbol] again. Press again to resume.
5. Use Folder down/up buttons to choose your desired folder.
6. Use [Previous Track] or [Next Track] buttons to skip tracks. [Previous Track] once restarts the current track; twice goes to the previous track. [Next Track] skips to the next track.
7. Press and hold skip buttons to fast forward/rewind within a track.
8. Press STOP [symbol] to stop playback.

DELETE Function:

When USB is stopped, press the DELETE button briefly, then use [Rewind] or [Fast Forward] buttons to select:

• DEL ONE: Delete one track.
• DEL FOLDER: Delete one folder.
• DEL ALL: Delete everything on USB.

Then, press DELETE button to confirm the mode.

Note: If the deletion mode is blinking, press STOP [symbol] or wait 15 seconds to cancel.

Repeat Playback (USB):

Press REPEAT button to cycle through REPEAT 1, REPEAT FOLDER, or REPEAT ALL.

Shuffle Playback (USB):

Press SHUFFLE button to play tracks in a random sequence.

Programmed Playback (USB):

Program up to 99 tracks. Press "CD/USB" to enter USB mode, insert USB. While stopped, press PROGRAM. Use track navigation buttons to select track number, then press PROGRAM. Repeat for more tracks. Press PLAY [symbol] to start. Cancel with STOP [symbol].

USB Recording Function

Audio from PHONO, TAPE, CD, or AUX/BLUETOOTH sources can be recorded onto USB memory (MP3 format).

Note: USB recording supports CD, CD-R, CD-W, MP3 CD, WMA formats. Does not support NTFS and EXFAT.

Recording:

1. Insert a USB memory stick into the USB slot.
2. Select the music source (PHONO, TAPE, AUX/ [Bluetooth symbol], or CD).
3. For vinyl, place the needle on the record.
4. Press the RECORD [symbol] button to start recording. Display shows "REC ADY" then track info.
5. When finished, press the STOP [symbol] button. Display shows "REC END".

Note: Only MP3 format can be recorded onto USB memory.

Manual Track Increment Assignment:

During recording, press the [Next Track] button to end the current track and begin a new one (approx. 3-5 seconds). The current track number will be indicated.

Note: Recording stops after approximately 15 minutes if the source is disconnected. Remote control can be used for all functions.

CD to USB Recording Function

1. Connect the USB memory stick into the USB slot.
2. Select CD mode. Put a CD/MP3 CD on the tray and close it.
3. If the CD/MP3 CD is playing, press the STOP [symbol] button.
4. Press the RECORD [symbol] button once to enter recording mode.
5. Press [Previous Track] or [Next Track] buttons to select "record one", "record folder", or "record all".
6. Press Record button again to start recording.
7. Pressing the STOP [symbol] button will cancel the recording.

Note: When audio from CD is recorded to USB in MP3 format, only the STOP button will work.

Maintenance / Proper Handling

Compact Disc Handling:

• Place discs with the label side facing up.
• Handle discs by the edges or label to avoid fingerprints.
• Clean discs with a soft, dry cloth from the center hole outward.
• Never use chemicals like record spray, benzene, or thinner.
• Return discs to their cases after use.
• Avoid direct sunlight, high humidity, or high temperatures.
• Do not use irregularly-shaped CDs.
• Never insert a disc with a crack.

Handling Vinyl Records:

• Do not touch the record's grooves. Handle by edges or label with clean hands.
• Clean records with a soft anti-static cloth.
• Keep records in their protective sleeves when not in use.
• Store records upright on their edges.
• Avoid direct sunlight, heat sources, vibration, dust, or moisture.

General Care:

• Pull the power plug directly from the wall outlet; never pull the cord.
• To clean the unit, use a clean, dry cloth. Do not use chemical solvents.
• Unplug the power cord if the unit will not be used for an extended period.

How to Replace the Turntable Stylus:

The stylus lasts about 50 hours. Replace when sound quality degrades to prevent record damage.

Removing the old stylus:

1. Set a screwdriver at the tip of the stylus and push downward [symbol A].
2. Remove the stylus by pulling it downward and forward simultaneously.

Installing a new stylus:

1. Hold the front tip of the stylus and insert its rear edge [symbol B] first.
2. Push the stylus upwards [symbol C] until it locks into place.

Caution: Do not remove or bend the stylus. Do not touch the needle. Turn off the unit's power before replacing the stylus. Keep out of reach of children.

Specifications

General:

• Power Requirements: AC 120 V~60 Hz
• Power Consumption: 35W
• Dimensions (W x H x D): 460 x 243 x 335mm | 18 x 9.6 x 13.2in (approx.)
• Weight: 12 kg. (approx.)

Amplifier:

• Output Power: 5W + 5W
• Frequency Response: 60 to 20,000 Hz

Speaker System:

• Type: 1-way
• Impedance: 8 ohms
• Input Power: Max. 10W

FM Radio:

• Range: 88 to 108 MHz

AM Radio:

• Range: 530 to 1710 KHz

CD Player:

• Frequency Response: 60 to 20,000 Hz +/-4 dB
• Signal-to-Noise Ratio: 55 dB (IEC-A)

Cassette Player:

• Track System: 4 Track, 2 channel stereo
• Tape Speed: 4.8 cm/sec
• Wow and Flutter: 0.4% (WRMS)
• Frequency Response: 125 to 6300 Hz +/-6 dB

Record Player:

• Motor: DC servo motor
• Drive System: Belt Drive
• Speeds: 33-1/3 rpm, 45 rpm and 78 rpm
• S/N Ratio: More than 50 dB
• Cartridge Type: Ceramic Stereo Cartridge
• Stylus: ITRRS-300

Bluetooth:

• Bluetooth Version: Bluetooth V2.1+EDR
• Bluetooth Profiles: A2DP, AVRCP
• Bluetooth Frequency range: 2.402GHz-2.480GHz
• Operating Distance: 10 meters (33 ft.)

USB:

• Type: USB series B connector
• Recording: USB record from vinyl, CD/CD-MP3, Cassette, AUX and Bluetooth.
• Full-Speed: USB 2.0 full speed

Troubleshooting Guide

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

IC Statement

This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable.

Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.

The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'expossition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé éaussi loin que possible du corps de l'utilisateur ou que le dispositif est régél sur la puissance de sortie la plus faible si une telle fonction est disponible.

California PROP 65 Warning

WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website address: http://www.oehha.ca.gov/prop65.html

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To Obtain Service: The purchaser MUST present an original sales receipt / proof of purchase. Contact www.ithomeproducts.com to request an RMA (Return Material Authorization) number. Returns without an RMA number will be refused. Upon receipt and inspection, IT may issue a replacement of equivalent value. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase, and reason for return to obtain RMA number. All returns must be in original packaging or a reasonable substitute. Include full name, shipping address, and telephone number inside the package. No return will be shipped back to a PO Box or APO address.

Return Shipping Fees:

• USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
• USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable.

Payments should be made to Innovative Technology Electronics LLC. for handling and return shipping charges.

Send inquiries or RMA requests via www.ithomeproducts.com/support.

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support

There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

Made in China.

Parts List

Assembling the Stand

STEP 1:

• Turn the Shelf (Top) (A) upside down on a flat, clean surface.
• Place a Top Leg (B) into each hole of the faceplate and tighten.
• Repeat to assemble the remaining Top Legs - 4 total.

STEP 2:

• Place the Shelf (Bottom) (C) on the base of the (4) Top Legs, aligning the holes.

STEP 3:

• Place the threaded end of one Bottom Leg (D) through each hole and into the corresponding Top Leg and fasten until tight.
• With all four Bottom Legs (D) in place, turn the fully assembled unit upright with the help of an assistant.

STEP 4:

• Insert first Record Rack (E) through the corresponding holes in the Shelf (Bottom) (C) and use a corresponding nut to securely attach (hand tighten only).
• Repeat for the second Record Rack (E).

Please Note

• Read, heed, and follow all instructions in the manual before operating.
• Keep this manual in a safe place for future reference.
• Choose unit location carefully. Avoid placing it in direct sunlight or close to a heat source. Also avoid locations subject to vibrations and excessive dust, cold, or moisture.
• Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• This product should be moved with care to avoid damage or injury. Unplug power cord, remove music center and records before moving Wooden Stand.
• Do not sit or stand on unit to avoid injury - only place music center and records on Wooden Stand.

Specifications

• Weight: 4.9 KGS (10.8lbs) approx.