Industrial Cellular Routers & Gateways
ICR-4133, ICR-4233 Industrial LTE-A Router & IoT Gateway
Introduction
The Advantech ICR-4133/ICR-4233 router family represents a leading solution in industrial routers, leveraging the full potential of LTE Cat.6 technology. These routers are optimized for EMEA and global markets, offering unparalleled data transfer speeds, minimal latency, and exceptional network reliability. They are a superior choice for 4G/LTE data transfers across a diverse range of industrial applications, including energy market (oil & gas distribution, EV charging/electricity distribution), remote access for machine builders, transaction management (kiosks/lottery terminals/ticketing machines), smart city, CCTV camera, surveillance, and various monitoring applications.
A key advantage of LTE Cat.6 is its improved network capacity and reduced latency in cellular networks, crucial for real-time responsiveness in applications demanding immediate feedback or interaction, especially in densely populated areas.
The routers are built on a robust hardware platform featuring a 1.6 GHz CPU, complemented by 1 GB RAM and 3.35 GB of space for customer applications. This powerful processing capability supports edge computing, facilitating data processing and analysis closer to the network edge.
Standard ICR-4133/ICR-4233 models include two Gigabit Ethernet ports, one USB Host 3.0, a GNSS receiver, two SIM card readers, four digital inputs, and two digital outputs. The ICR-4233 further extends connectivity with two serial ports (RS232/RS485).
Optional configurations include two serial ports (RS232/RS485), four digital inputs, two digital outputs, and WiFi 6 (IEEE802.11 ax/ac/a/b/g/n 2.4 GHz/5 GHz/6 GHz, 2x2 MIMO) and Bluetooth V5.2.
Cybersecurity is a critical design consideration, with features like TPM 2.0 and a Tamper Button ensuring data integrity and safety for operation within critical infrastructure systems. Robust security measures enable confident deployment in sensitive environments.
Advanced networking features and management capabilities allow remote configuration and management, supporting multiple configuration profiles, automatic firmware updates, and customizable software options. Adaptability is enhanced through RouterApps (Docker, Node-RED, etc.) and customized scripting on top of the ICR-OS based on the Linux kernel.
For streamlined management and deployment, the ICR-4133/4233 router family can be efficiently handled using the cloud-based tool WebAccess/DMP. This software facilitates centralized management, provisioning, and monitoring of multiple routers, simplifying network infrastructure scaling and maintenance, and centralizing VPN connections.
Features
- LTE-Advanced Cat.6 Cellular Connectivity
- Quad-core CPU with 1 GB RAM
- 2x SIM, Optional eSIM, TPM 2.0
- 2x Gigabit Ethernet
- USB Host 3.0
- 2x Serial RS232/RS485, 4x DI, 2× DO (ICR-4200)
- GNSS Receiver, Micro SD Card
- Robust metal cover with wall and DIN mount options
- Wide operational temperature range
- Optional Tri-Band WiFi 6
- Optional Bluetooth V5.2
Order Codes
| Model no. - Order Codes | REGION | 2x Gigabit Ethernet | 2x Serial RS232/R485 | GNSS | I/O | 1x USB Host 3.0 | 4x ANT | 2x SIM | WiFi 6 | Bluetooth V5.2 |
|---|
| ICR-4233 | EMEA* | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | | |
| ICR-4233W | EMEA* | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| ICR-4133 | EMEA* | ✓ | | ✓ | ✓ | ✓ | ✓ | ✓ | | |
| ICR-4133W | EMEA* | ✓ | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
* The router is compatible with cellular networks in the indicated region. The importer/operator needs to check locale legislation (standards, national Telecom approvals, etc.) and compare with standards available for the product if possible to operate the router in the target region legally.
Specifications
| System |
|---|
| CPU | Quad-Core ARM Cortex-A53, 1.6 GHz |
| Memory | RAM - 1GB, eMMC - 8 GB (2.18 GB for Router Apps, 474 MB for customer data, 231 MB for system data) |
| Watchdog | HW Watchdog |
| RTC | Battery backup RTC |
| TPM | Trusted Platform Module (TPM) 2.0 |
| Interfaces |
|---|
| Ethernet | 2x Ethernet, RJ45, 10/100/1000 Mbps, isolation 1.5 kV |
| Serial Lines (ICR-4200) | 2x RS232/RS485 independently selectable by DIP switch. RS232 (Tx, Rx, GND, RTS, CTS), RS485 (A(-), B(+), GND), 16-pin terminal block (no isolation) |
| I/O (ICR-4200) | 4x Digital Input (48 V / 3 mA consumption), 2x Digital Output (Open Drain, 48 V/500 mA), 16-pin terminal block (no isolation) |
| USB | 1x USB 3.0 Host Connector |
| MicroSD Card | 1x Micro SD Card Slot |
| Reset Button | Reboot / Factory reset |
| LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 3G/4G/LTE-A technology, WiFi, User, ETH |
| GNSS |
|---|
| Antenna | Passive antenna, GNSS L1 band on the ANT3, L5 on the ANT1 |
| Systems | GPS, GLONASS, BDS, Galileo |
| Protocol | NMEA |
| Ac Time-to-First-Fix | Cold start: 40 s, Warm start: 35 s, Hot start: 3 s |
| Environmental |
|---|
| Power Supply | 9-48 V DC (2-pin terminal block) |
| Consumption | Without WiFi: Idle 4.2 W / Average 5.9 W / Maximum 11.6 W
With WiFi: TBD |
| Sleep Mode | Yes, 10 mW |
| Operating Temperature | -40 to +75 °C |
| Storage Temperature | -40 to +85 °C |
| Humidity | 0 to 95% |
| IP Cover | IP30 |
| Physical Characteristics |
|---|
| Dimensions | 43 x 130 x 90 mm |
| Enclosure | Robust Metal Case, Grounding Screw |
| Mounting | Wall Mounting, DIN Rail |
| WiFi - optional (ICR-4133W, ICR-4233W) |
|---|
| Antenna | 2x R-SMA connectors, 2×2 MIMO |
| Standards | IEEE802.11 ax/ac/a/b/g/n 2.4 GHz/5 GHz/ 6 GHz |
| Data Rate | Up to 450 Mbps @ 2.4 GHz, Up to 950 Mbps @ 5 GHz |
| Security | WEP, TKIP, AES, WPA, WPA2, WPA3, 802.1X |
| Modes | Access Point, Station, Multirole STA & AP, Dual-band concurrent |
| Bluetooth - optional (ICR-4133W, ICR-4233W) |
|---|
| Antenna | Shared R-SMA WiFi antenna connector |
| Bluetooth | Bluetooth V5.2 |
| Cellular Interface |
|---|
| SIM Slots | 2x SIM (Mini SIMS - 2FF), 1x Optional eSIM |
| Antennas | 2x SMA connector |
| LTE-A Parameters | LTE-FDD Bands: B1/B3/B5/B7/B8/B20/B28/B32, LTE-TDD Bands: B38/B40/B41. Transfer rate: 300 Mbps (DL), 50 Mbps (UL) |
| HSPA+/UMTS Parameters | Supported frequency bands: B1/B3/B5/B8. Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL) |
Standards & Regulations
| |
|---|
| Radio | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 300 328, EN 301 893, EN 303 687 |
| EMC | EN 301 491-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 61000-6-2, EN 61000-6-3, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6 |
| Safety | IEC 62368-1, IEC 62311 |
| Transportation | *E-mark |
| National | CE, UKCA |
| Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78 |
| Environmental | REACH, RoHS3, WEEE |
| Cellular Module Approvals* | Regulatory: GCF, CE, RCM, UKCA |
* Approvals are valid for the integrated cellular module inside the router only. Cellular module approvals are not always applicable for the whole router - see "Standards and Regulations" chart for complete router approvals available.
Accessories
| Part Number | Description | Included in the package |
|---|
| BB-CON-WR2 | 2-pin PWR connector | |
| CON-ICR28-16 | 16-pin Serial / I/O connector | ✓ |
| Wall mount kit | |
| BB-DIN-ICR32 | DIN clip | |
| RPS-ICR4-WR2-M | Wall mount Power supply, 12 V/1.5 A, EU, UK, US, AUS plugs | |
| BB-KD-ETH | Ethernet cross cable, 1.5 m, Shielded | |
| OPT1-ANT-WFT-06 | Antenna Wi-Fi, 2.4 GHz / 5 GHz/ 6 GHz (2 pcs are recommended for full 2×2 MIMO performance) | Optional |
| ANT-LTE5G-025 | Antenna 5G/LTE, Terminal (2 pcs are recommended for full cellular performance) | |
| BB-2J6024BA-150 | Antenna LTE 2in1 MIMO, Low profile Screw mount, 2x cable 1.5 m | |
| BB-2J6983MPA-150 | Antenna 2in1 5G/LTE MIMO, Magnetic and Adhesive mount, 2x cable 1.5 m | |
| BB-2J7041BGFAP-300 | Antenna LTE 3in1 MIMO, GPS passive, dome screw mount, 3x cable 3m | |
For more Antenna accessories visit www.advantech.com
ICR-4200 Views
Front View
The front panel of the ICR-4200 features LED Indicators, WiFi connectors, two ETH 10/100/1000 connectors, and ANT antenna connectors. Below these are the RESET button, PWR connector, USB Host connector, and Serial port/I/O connector. The Advantech logo is prominently displayed.
Rear View
The rear view shows a robust metal cooler and options for DIN Mounting.
Left Side View
The left side includes a Ground Clamp - Screw and Antennas connectors.
Right Side View
The right side features Antennas connectors and a robust metal cover. A detailed view shows the RS232 port with a cover for inserting/removing SIM & Micro SD cards, and a Serial mode DIP selector.
ICR-4100 Views
Front View
The front panel of the ICR-4100 features LED Indicators, WiFi connectors, two ETH 10/100/1000 connectors, and ANT antenna connectors. Below these are the RESET button, PWR connector, and USB Host connector. The Advantech logo is prominently displayed.
Rear View
The rear view shows a robust metal cooler and options for DIN Mounting.
Left Side View
The left side includes a Ground Clamp - Screw and Antennas connectors.
Right Side View
The right side features Antennas connectors and a robust metal cover. A detailed view shows the SIM & Micro SD Cover.
Dimensions - Technical Drawing
Wall Mount
The device dimensions for wall mount are approximately 43 mm (width) x 130 mm (depth) x 90 mm (height). The overall width including mounting brackets is 142.9 mm, and the height including connectors is 64 mm. The mounting holes are spaced 5.00 mm from the top edge. The front panel layout shows LEDs for WiFi, PWR, RST, ETH0, ETH1, USB, and SERIAL & I/O, along with connectors for ANT, GNSS, and DIV. The total length from the front to the back of the connectors is 153.9 mm.
DIN Holder
The device dimensions for DIN rail mounting are approximately 43 mm (width) x 130 mm (depth) x 99.6 mm (height). The overall width including the DIN clip is 130 mm. The front panel layout is identical to the wall mount version, showing LEDs for WiFi, PWR, RST, ETH0, ETH1, USB, and SERIAL & I/O, along with connectors for ANT, GNSS, and DIV.
