YOSUDA Electric Under Desk Ellipse User Manual

Customer Service

Thank you for selecting the YOSUDA Electric Under Desk Ellipse. For your safety and benefit, read this manual carefully before using the machine.

As a manufacturer, we are committed to providing you with complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, please contact our customer service:

AvaBestcustomerservice@outlook.com

Contact us via Amazon: Login your Amazon account > choose "Your orders" > find the order ID > click "Contact seller"

Part List

The YOSUDA Electric Under Desk Ellipse includes the following components:

• Hand Holder
• Pedal
• Slide Track
• Remote Control
• Control Panel

Remote Control Features: Includes a power button and directional/speed controls.

Control Panel Features: Displays time, distance, speed, calories, counter, and mode indicators. Buttons include FUNCTION, POWER, MODE, DIRECTION, SPEED.

Remote Control Power: Requires 2*AAA 1.5V batteries.

Operation Instruction

General Operation:

• Connect the power cord. The machine will automatically stop every 30 minutes and requires restarting.
• After every 30 minutes of use, allow the machine to rest for 5 minutes for optimal service life.
• The machine offers 1-10 manual gears and 3 pre-programmed gears (P1-P3). Movement direction can be switched in manual gears.

Using the Control Panel:

• After plugging in the power supply, the product is in a connected state ("---").
• Press the "POWER" button once for HR-standby state. Press "POWER" again to start in the first manual gear.
• Press the "FUNCTION" key to cycle through pre-programmed modes: P1, P2, P3.
• In manual gear ("HR" state), press "DIRECTION" to switch movement direction and "SPEED" to adjust speed from 1-10.
• "DIRECTION/SPEED" keys are not operable in P1-P3 pre-programmed modes.
• When the red dot is in "SCAN" mode, display cycles through Time, Distance, Speed, Laps, Calories every 5 seconds.
• Press the "MODE" key to manually select which data to display (the red dot will not be in "SCAN").

Using the Remote Control:

• Press the "POWER" button to display HR state. Press "START/STOP" to begin manual mode.
• When the red dot is in "SCAN" mode, display cycles through Time, Distance, Speed, Laps, Calories every 5 seconds.
• Press the "MODE" button to manually select which data to display (the red dot will not be in "SCAN").
• Press the "FUNCTION" key to switch from manual mode to pre-programmed modes.

Control Panel Display Functions:

• SCAN: Press "MODE" until "SCAN" light is on. Displays each function value every five seconds.
• TIME: Press "MODE" until "TIME" light is on. Shows actual training time.
• DISTANCE: Press "MODE" until "DISTANCE" light is on. Shows walking distance.
• SPEED: Press "MODE" until "SPEED" light is on. Shows current speed.
• COUNTER: Press "MODE" until "COUNTER" light is on. Shows accumulated number of turns.
• CALORIE: Press "MODE" until "CALORIE" light is on. Shows current calories burned.

Pre-programmed Exercise Modes (P)

Press the "FUNCTION" button once for P1, twice for P2, and three times for P3. The pedal will operate at different speeds and directions in these modes. Speed and direction cannot be changed during pre-programmed operation.

Note: Do not step on the machine quickly when it is not energized, as this may overcharge and damage the electrical control circuit board.

Pre-programmed Models Introduction:

• P1: Gentle leg rehabilitation exercises to improve mobility.
• P2: Low-intensity exercise for better prevention of varicose veins.
• P3: Moderate-intensity exercise to burn calories.

Visual representations of P1, P2, P3 show undulating patterns indicating varying speed and direction changes.

Care And Maintenance

Storage

When not in use, store the product in its packaging box in a dry, ventilated, and cool place. Do not twist the power cord. Avoid direct sunlight, high temperatures, and humid environments like bathrooms.

Cleaning

Before cleaning, unplug the power cord. Use a dry cloth to clean the product surface. Do not use corrosive cleaning agents.

Troubleshooting

If you encounter issues, refer to the following:

Safety Precautions

Please use this product in accordance with the operating instructions.

1. Press the on/off key to turn off the power after each use. Unplug the power cord when not in use or cleaning.
2. Do not cover the machine during use to prevent motor overheating and damage.
3. This device is for adults only. Do not allow children to use it.
4. If you feel uncomfortable or experience adverse symptoms, stop using the machine immediately.
5. Do not use if the product is damaged or defective.
6. Do not insert or drop debris into the product.
7. This device is not suitable for therapeutic purposes. Do not use with other medical electronic devices like pacemakers. Do not use if you have steel plates or other body fixtures after surgery.
8. Do not use in humid or dusty environments (e.g., bathrooms).
9. Do not store or use outdoors. Keep the product away from direct sunlight.
10. Do not operate the machine with wet hands.
11. Prevent water and other liquids from contacting the control switch.
12. Do not place the power cord under the product or heavy objects.
13. Do not wrap the power cord around the product, as this may damage it and cause electric shock or fire.
14. Do not use the product if the power plug is loose.
15. Do not drag the product using the power cord.
16. Use the machine on a horizontal indoor surface, ensuring at least 1 meter of debris-free space around it.
17. If there is a power outage during use, stop using the product. A sudden restoration of power could be hazardous.
18. Rated voltage: 110V-240V. Rated power: 50W. Maximum single use time: 30 minutes.
19. Consult your doctor before use to ensure it is suitable for you.

Warning: Please sit down to use this product. Remember not to stand on the product or step on it!