Behringer HEAVY DISTORTION HD300

Heavy Metal Distortion Effects Pedal

Introduction

Thank you for choosing the Behringer HEAVY DISTORTION HD300. This high-quality effects pedal allows you to produce thick, tube-like distortion with endless sustain, ideal for achieving the signature sounds of hard rock and heavy metal when playing through a clean amplifier channel.

1. Controls

1. LEVEL: Adjusts the output level.
2. TONE: Shapes the overall sound of the effect.
3. BOTTOM: Boosts or cuts the low-frequency range.
4. DIST(ortion): Controls the amount of distortion.
5. GAIN BOOST: Increases gain for more extreme distortion sounds.
6. ON/BATT LED: Illuminates when the effect is active and serves as a battery level indicator.
7. Footswitch: Activates or deactivates the effect.
8. 1/4" TS IN Connector: Connect your instrument cable here.
9. 1/4" TS OUT Connector: Sends the signal to your amplifier.

Use the DC IN connection for a 9 V power supply (not included). The battery compartment is located under the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and carefully remove the pedal cover to avoid scratching the unit.

Operation

The HD300 does not have a separate on/off switch. The pedal is active as soon as you plug your instrument into the IN connector. To conserve battery life when not in use, unplug the cable from the IN connector.

The serial number is located on the underside of the unit.

2. Safety Instructions

Do not use or install near water or heat sources. Use only authorized accessories and attachments. Do not attempt to service the product yourself. Contact qualified service personnel for servicing or repairs, especially if the power supply cord or plug is damaged.

3. Warranty

For applicable warranty terms, conditions, and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

4. Specifications

Feature	Details
In Connector	1/4" TS
In Impedance	500 kΩ
Out Connector	1/4" TS
Out Impedance	1 kΩ
Power Supply	9 V, 100 mA regulated
Power Supply Model	Behringer PSU-SB
Power Supply Voltage/Frequency	USA/Canada: 120 V~, 60 Hz China/Korea: 220 V~, 50 Hz U.K./Australia: 240 V~, 50 Hz Europe: 230 V~, 50 Hz Japan: 100 V~, 50-60 Hz
Power connector	2 mm DC jack, negative center
Battery	9 V type 6LR61
Power consumption	30 mA
Physical/Weight Dimensions (H x W x D)	approx. 2 1/8 x 2 3/4 x 4 4/5" (approx. 54 x 70 x 123 mm)
Physical/Weight Weight	approx. 0.73 lbs / 0.33 kg

Behringer is committed to maintaining the highest professional standards. Specifications and appearance are subject to change without prior notice.

Compliance and Legal Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product is in compliance with EU Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012, REACH SVHC and Directive 1907/2006/EC.

All trademarks are the property of their respective owners. Behringer is a trademark of Music Tribe Global Brands Ltd.

Models: HD300, Heavy Metal Distortion Effects Pedal, HD300 Heavy Metal Distortion Effects Pedal

File Info : application/pdf, 23 Pages, 919.20KB

HD300 M WW

References

Adobe InDesign 16.0 (Windows) Adobe PDF Library 15.0

Related Documents

	Behringer OD300 Overdrive/Distortion Guitar Pedal - User Manual & Specifications Comprehensive user manual and specifications for the Behringer OD300 Overdrive/Distortion guitar effects pedal. Learn about its controls, features, safety instructions, and technical specifications for achieving classic overdrive and distortion tones.
	Behringer SUPER FUZZ SF300: 3-Mode Fuzz Distortion Effects Pedal Detailed overview of the Behringer SUPER FUZZ SF300, a versatile 3-mode fuzz distortion effects pedal for electric guitars. Learn about its controls, operation, technical specifications, safety, and warranty.
	Behringer Octavia Octave Fuzz Quick Start Guide A quick start guide for the Behringer Octavia Octave Fuzz vintage octave fuzz pedal. It provides essential safety instructions, hook-up details, control descriptions, specifications, battery operation, and compliance information.
	Behringer FCV100: Ultra-Flexible Dual-Mode Foot Pedal Manual Comprehensive guide to the Behringer FCV100, a versatile dual-mode foot pedal for volume and modulation control. Learn about its features, operation, connections, and specifications.
	Behringer BASS OVERDRIVE BOD400 User Manual - Authentic Tube-Sound Overdrive Effects Pedal User manual for the Behringer BASS OVERDRIVE BOD400, an authentic tube-sound overdrive effects pedal for bass applications. Includes detailed descriptions of controls, safety instructions, warranty information, FCC compliance, and EU declaration.
	Behringer PB1000/PB600 Pedal Board: User Manual and Specifications Comprehensive guide to the Behringer PB1000/PB600 Universal Effects Pedal Floor Board, detailing connections, safety instructions, warranty information, specifications, and application examples. Features integrated 9V DC power supply and patch cables for up to 12 or 6 effect pedals.
	Behringer FX600 Digital Stereo Multi-Effects Pedal User Manual Comprehensive guide to the Behringer FX600 Digital Stereo Multi-Effects Pedal, covering its 24-bit stereo effects, controls, specifications, and safety instructions. Learn about Chorus, Flanger, Phaser, Delay, Tremolo, and Pitch Shifter effects.
	Behringer DIGITAL MULTI-FX FX600 User Manual - Digital Stereo Multi-Effects Pedal Guide This user manual provides detailed instructions, safety guidelines, and specifications for the Behringer DIGITAL MULTI-FX FX600 digital stereo multi-effects pedal. Learn about its controls, features, and proper usage.