Product Overview
The Behringer SUPER FUZZ SF300 is a compact, single-unit effects pedal designed for electric guitars. It aims to replicate the renowned fuzz tones of the 1960s and 1970s, offering versatile sound-shaping capabilities for guitarists.
Pedal Description
The Behringer SUPER FUZZ SF300 is a compact effects pedal with a metallic grey casing. The top panel features the product name "SUPER FUZZ SF300" and the brand "behringer". Controls are arranged from left to right: LEVEL, TREBLE, BASS, GAIN, and a MODE switch. Below these are selectors for FUZZ 1 and FUZZ 2 modes, and a BOOST function. An LED indicator labeled "ON/BATT" is also present. On the front edge, there are two 1/4" TS input/output jacks, labeled "IN" and "OUT". The rear panel includes a DC IN power jack. The battery compartment is located on the underside of the pedal.
Controls and Features
- LEVEL: Adjusts the output level of the effect.
- TREBLE: Boosts or cuts treble frequencies.
- BASS: Boosts or cuts bass frequencies.
- GAIN: Controls the amount of distortion or fuzz for a wider range of tones.
- MODE: A switch to select one of three distinct effect modes:
- FUZZ 1: Provides a basic fuzz tone, emphasizing mid-range frequencies.
- FUZZ 2: Delivers a fuller fuzz sound with less prominent mids and distinct harmonics.
- BOOST: When the LEVEL control is turned down and the GAIN control is adjusted, this mode offers a boost function.
- ON/BATT: An LED indicator that illuminates when the effect is active. It also serves to check the battery status.
- Foot Switch: Engages or disengages the effect pedal.
- Input Jack (8): A 1/4" TS mono input jack for connecting your instrument's cable.
- Output Jack (9): A 1/4" TS mono output jack to send your signal to an amplifier.
- DC IN Jack: For connecting a 9V power adapter (not included).
- Battery Compartment: Located on the bottom of the pedal. To replace the battery, press the hinge with a ballpoint pen to release the treadle. Be careful not to scratch the pedal.
Operation
The SF300 is activated automatically when a cable is plugged into the IN jack. To conserve battery life, unplug the cable when the pedal is not in use.
Technical Specifications
| Parameter | Specification |
|---|---|
| Connectors | 1/4" TS |
| Impedance | Input: 500 kΩ, Output: 1 kΩ |
| Power Supply | Behringer PSU-SB (9V, 100 mA) |
| Power Requirements |
|
| Power Connector | 2 mm DC jack, center negative |
| Battery | 9V type 6LR61 |
| Power Consumption | 30 mA |
| Dimensions (H x W x D) | Approx. 2 1/8" x 2 3/4" x 4 4/5" (approx. 54 x 70 x 123 mm) |
| Weight | Approx. 0.73 lbs / 0.33 kg |
Safety Instructions
- Do not use near water or heat sources.
- Only use manufacturer-specified accessories.
- Do not attempt to service the product yourself. Contact authorized service personnel for repairs, especially if the power cord or plug is damaged.
- This user manual is available for download at http://behringer.com.
Warranty Information
For information on Behringer's warranty terms and conditions, please visit the Music Tribe website at https://musictribe.com/warranty.
Legal Notice
Behringer strives for the highest product quality. Necessary modifications are made without prior notice. Therefore, product specifications and appearance may differ from those shown in this manual. Music Tribe assumes no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, and Coolaudio are trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021. All rights reserved.
