Behringer PB1000/PB600 Universal Effects Pedal Floor Board

Introduction

Thank you for choosing the Behringer PEDAL BOARD PB1000/PB600. This high-quality, lightweight pedal board is designed to transport and power up to 12 (PB1000) or 6 (PB600) effect pedals. The integrated 1.7 A power supply includes all necessary cabling for powering your collection of stompboxes.

1. Connections

The pedal board features several connection points for your effects pedals and amplifier:

• 1. INPUT: 1/4" TS connector for your instrument cable. Use a high-quality instrument cable.
• 2. TO EFFECTS: 1/4" TS connector that sends the signal to your effects pedals.
• 3. FROM EFFECTS: 1/4" TS connectors for receiving stereo effects signals from your pedals.
• 4. OUTPUT TO AMP: 1/4" TS connectors that send the signal to your amplifier(s).
• 5. 9 V Connection: For connecting the included 9 V power supply.
• 6. DC OUT: Connector for the included daisy chain cable, used to power all connected effect pedals.

Diagrams illustrating the connection layout are provided in the original document.

2. Safety Instructions

• Do not use near water or heat sources.
• Use only authorized attachments and accessories.
• Do not attempt to service the product yourself. Contact qualified service personnel for servicing or repairs, especially if the power supply cord or plug is damaged.
• Operate within an ambient temperature up to 45°C.

3. Warranty

For applicable warranty terms and conditions, and additional information regarding Music Tribe's Limited Warranty, please visit musictribe.com/warranty for complete details.

4. Specifications

PB1000

• Connectors: 1/4" TS, unbalanced
• Power Supply: 9 V, 1.7 A switching adapter (included)
• Power Connector: 2 mm DC jack, center negative (with daisy-chain cable included)
• Power Consumption: 2 mA
• Dimensions (H x W x D): 19.8 x 26.1 x 4.5" (504 x 663 x 115 mm)
• Weight: Approx. 12.3 lbs / 5.6 kg (including PSU & daisy chain)

PB600

• Connectors: 1/4" TS, unbalanced
• Power Supply: 9 V, 1.7 A switching adapter (included)
• Power Connector: 2 mm DC jack, center negative (with daisy-chain cable included)
• Power Consumption: 2 mA
• Dimensions (H x W x D): 13 x 26.1 x 4.4" (329 x 663 x 113 mm)
• Weight: Approx. 8.4 lbs / 3.8 kg (including PSU & daisy chain)

Note: Behringer continuously strives for the highest professional standards. Modifications may be made to existing products without prior notice. Specifications and appearance are subject to change.

5. Application Example

Diagrams illustrating a typical application setup with effect pedals and amplifiers are provided in the original document. The PB1000 can accommodate up to 12 pedals, while the PB600 can accommodate up to 6 pedals.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Music Tribe can void the user's authority to use the equipment.

CE Declaration: Music Tribe declares that this product is in compliance with relevant EU Directives.

Company Information

Responsible Party: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

EU Representative: Music Tribe Brands DK A/S

Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark

For further details and warranty information, please visit community.musictribe.com.