STAR & ART BLACK ECOLINE DOUCHECABINE
Installation instructions
SIZE: 90*90*200 cm
SIZE: 100*100*200 cm
Tools Required (Not Supplied)
When you're ready to start, make sure that you have the following tools to hand, plenty of space, and a clean dry area for assembly.
Two people are needed. Please note: Although these instructions are comprehensive, we always recommend that a technically competent installer should undertake installation.
Tools:
- Drill bit to suit wall type 5.5mm
- Power drill
- Silicone
- Tape measure
- Forfex [✂️]
- Pencil
- Rubber Mallet
- Magnetic cross head screw driver
- Level
Parts List
| Part | Description | Quantity |
|---|---|---|
| A1 | 8PCS | |
| B1 | 4x25mm | 8PCS |
| C1 | 4x20mm | 2PCS |
| D1 | 4x10mm | 4PCS |
| E1 | 4x8mm | 4PCS |
| F1 | 4PCS | |
| G1 | 4PCS | |
| H1 | 8PCS | |
| I1 | 4PCS | |
| J1 | 4PCS | |
| K1 | 2PCS | |
| L1 | 2PCS | |
| M1 | 2PCS | |
| N1 | Ø3mm | 1PCS |
Assembly Steps
Step 1: Wall Mounting
Prepare the wall by drilling holes using a 5.5mm drill bit. Attach the vertical profiles (A) to the wall using screws (A1) and (B1). Ensure the profiles are level.
Diagram description: Shows a vertical profile (A) being attached to a corner wall with multiple screws (A1, B1). A close-up shows drilling with a 5.5mm bit and inserting screws.
Step 2: Frame Assembly
Attach horizontal profiles (F) and vertical supports (B) to the wall-mounted profiles. Use screws (G1) and (D1) for connections. Ensure proper alignment.
Diagram description: Shows the attachment of horizontal and vertical frame members using screws (G1, D1). Close-ups illustrate the connection points.
Step 3: Glass Panel Installation
Insert the glass panels into the frame. Secure them using fixings (L1) and (N1 - Ø3mm). Attach the bottom and top channels with screws (F1) and (E1 - st4x8mm).
Diagram description: Shows glass panels being slotted into the frame. Close-ups detail the use of fixings (L1, N1) and screws (F1, E1) to secure the glass.
Step 4: Door Installation
Attach the doors to the frame. Use the provided rollers and guides (J1) to ensure smooth operation. Secure the doors in place.
Diagram description: Shows doors being fitted into the frame, with close-ups illustrating the attachment mechanism using parts like J1.
Step 5: Final Securing and Adjustments
Install the handles (K1) using screws (M1) and (C1 - st4x20mm). Make any necessary adjustments to ensure the doors close properly and the cabin is stable. A note indicates '48' which might refer to a time or a specific setting.
Diagram description: Shows handles being attached to the doors. Close-ups detail the screw types (M1, C1) used for this. Another diagram shows final adjustments to the door alignment.
