eSSL

Product Layout

The product layout illustrates the internal and external components of the smart lock. Key external parts include the keypad, RFID scanner, fingerprint sensor, inside handle, outside handle, key cover, USB external power port, and keyhole. Internal components comprise the battery cover, battery box, data line, guide post, lock core, cylinder, and various screws. A separate diagram details the spindle and screw installation, showing the spindle passing through the door and connecting to the lock body.

Panel and Lock Body Installation Steps

1. Adjust latch direction according to the door opening side.
2. Install lock body and cylinder: Place the lock body into the designated hole, tighten the screw, insert the cylinder into the lock body guard hole, and then tighten the cylinder screw.
3. Panel Installation:
   • Change handle direction: Attach the stud and guidepost to the front panel simultaneously. Insert the spring into the square hole. Adjust the spindle and lock core as needed.
   • Mount the front panel: Insert the spindle into the lock body. Route the data line from the top of the lock body into the door. Ensure the spindle and stud align with their respective holes, and the front panel sits flush against the door.
   • Connect cables: Connect the main board cable to the corresponding interface on the back panel.
   • Attach back panel: Position the spindle, cylinder, and snib core correctly. Secure the back panel to the door using installation screws.
   • Test functionality: Check the handle and snib operation. Adjust the panel and cylinder if necessary for smooth movement.
   • Install battery cover: Insert batteries and test the lock using fingerprint, RFID card, PIN code, or manual key.

Note: Please keep internal/external panels clean before installation.

Change Handle Direction

To change the handle direction, use a cross screwdriver to unscrew parts 1 and 3. Rotate the handle 180 degrees clockwise or counterclockwise, then retighten screws 1 and 3. For the back panel, follow the same procedure, ensuring the safety button is in the 'off' position.

Lock Body Change Direction

To change the lock body direction, push the latch inward, rotate the latch 180 degrees, and confirm the inside/outside orientation. Ensure screws always align with the inside panel; if reversal is needed, unscrew and screw into the other side.

Product Features

• Multiple access methods: Fingerprint, PIN Code, RFID Card, and Mechanical Key.
• Fingerprint: Utilizes advanced semiconductor sensors with a 360° scanner.
• PIN Code: Features an elegant keypad with a code scrambling feature. Users can input up to 12 digits before the correct password to prevent peeping.
• Dual Authentication Modes: Supports Fingerprint (master + common user), Fingerprint + PIN Code, and Fingerprint + RFID Card modes for enhanced security.
• Master/User Management: Allows for up to 9 master users (fingerprint, PIN, or card). Total user capacity is 300.
• Door Bell: The '0' key functions as a door bell when the lock lights are off.
• Alarm System: Includes tamper, low battery, and password protection alarms.
• External Power Supply: Can be powered by a 5V power bank for emergency use.

Operations

1. Reset Factory Default

Press the RESET button on the back of the lock for 5 seconds. A voice prompt will confirm 'reset succeed'.

2. Lock Settings

2.1 Administrator Settings

Touch the keypad to activate lights, then press '#' for 2 seconds, followed by '1' for Administrator settings.

• Addition of Master User: Press '1' again. For Fingerprint, scan the fingerprint sensor 5 times. For RFID Card, scan the card near the RFID scanner. For PIN Code, enter an 8-digit PIN, press '#', and repeat the PIN, then press '#'. Voice prompts will confirm successful addition (e.g., "1X1X Successful"). Press '*' to return to the main menu.
• Deletion of Master User: Press '2'. The system will prompt for a user number. Enter the respective user number (e.g., "1X1X") and press '#' to confirm deletion.

2.2 User Settings

Access via Administrator Settings (press '2' after initial verification). Press '1' for User Addition.

• Fingerprint Addition: Scan fingerprint 5 times. Voice prompts "1X1X Successful".
• RFID Card Addition: Scan RFID card. Voice prompts "1X1X Successful".
• PIN Code Addition: Enter 8-digit PIN, press '#', repeat PIN, press '#'. Voice prompts "1X1X Successful".
• Press '*' to return to the main menu.
• User Deletion: Press '2'. Enter the user number (e.g., "1X1X") and press '#' to confirm.

2.3 System Settings

Access via Administrator Settings (press '3' after initial verification).

• Time Settings: The lock syncs with the current time. To change, enter date and time in YYYYMMDDHHMM format and press '#'. Press '*' to return.
• Lock Number Modification: Assign a number (4 digits) to the lock. Enter the new number and press '#'. Confirm the number. Press '*' to return.
• Voice Settings: Press '4' to decrease volume, '6' to increase volume.
• Unlock Mode: Choose between Single Authentication (any authorized user) or Combination Unlock (two authorized users).

2.4 Reboot System

Access via Administrator Settings (press '4' after initial verification). Authorize administrator access. The lock will reboot and prompt 'initialization successful'.

2.5 Information Inquiry

Access via Administrator Settings (press '5' after initial verification).

• Record Enquiry: View last usage records. Press '*' to return.
• Information on User: Enter user number to view registration time and date. Press '*' to return.
• Storage Capacity: Displays the number of registered users (fingerprint, PIN, RFID) and available capacity.

Additional Unlock Options:

• Press '1' for Single Unlocking Access.
• Press '2' for Dual or Combination Unlock.
• Press '3' for Time to Unlock (auto-re-lock period, default 6 seconds, range 1-9 seconds). Use '2' to increase and '8' to decrease the time.

TUYA Smart Integration

TUYA Smart Introducing

• Unlocking Record: Access unlock history (way, ID, timing) via the app for up to 12 months.
• Offline Record: Records are uploaded to the cloud when the device is online.
• Alarm Features: Includes low battery, incorrect password/fingerprint/card, and anti-prying alarms.
• Time Synchronization: Ensures lock time matches server time, supporting global time zones and daylight saving.
• Remote Unlocking: Trigger remote unlock requests via the app by pressing the bell icon.
• Hijack Alarm: Set coercion information (fingerprint, password, card) to trigger a hijack alarm.

TUYA Smart Connecting

1. Search for the Tuya app in your app store and register an account.
2. Open the app and follow the on-screen instructions to add the lock.
3. Choose your router and enter the Wi-Fi password (ensure it's a 2.4 GHz network).
4. Long press '#' then press '1' to enter management, press '3' for network settings, and '1' to connect.

Add Temporary Code Setting

Temporary codes can be set for specific periods. The system supports up to 10 groups of codes, which can be audited or deleted. After adding a temporary code, test it on the lock.

Dynamic Code

Dynamic codes can be obtained from the 'Dynamic Code' page within the app.

Remarks

• After installation, reset the lock to factory default mode.
• The handle is crucial for door operation; avoid hanging items on it.
• Press the fingerprint sensor gently to avoid scratching.
• The lock uses 4 AA alkaline batteries (1.5V). Replace batteries promptly when prompted for low voltage to avoid inconvenience. The lock can be opened approximately 100 times after the first low voltage warning.
• After 5 consecutive incorrect fingerprint, card, or code entries, the lock will be disabled for 90 seconds.
• All fingerprints must be scanned 5 times for addition.
• Passwords are 8 digits and must be entered twice for addition.
• Cards are registered after the voice prompt "add user" and scanning the card near the RFID scanner. Press '*' to exit after successful registration.
• When deleting fingerprints, at least one master user fingerprint must remain.

Contact Information

eSSL Security
#24, Shambavi Building, 23rd Main, Marenahalli, JP Nagar 2nd Phase, Bengaluru - 560078
Phone: +91-8026090500
Email: sales@esslsecurity.com
Website: www.esslsecurity.com