User Manuals, Instructions and Guides for eSSL products.

eSSL FL100 M Intelligent Fingerprint Door Locks User Manual

eSSL FL100 M Intelligent Fingerprint Door Locks Product Layout Please keep the internal/external panel clean before installation. Panel and lock body installation steps  Adjust the latch direction according to the door opening side.  Lock body and cylinder installation: Put lock body into the hole made then tighten the screw, put the cylinder into lock bodyguard …

eSSL Tyre Killer Series User Manual

eSSL Tyre Killer Series Technical Parameter System : 220V electric drive Passing pressure: Max 80T container truck Power supply: 220 ( Control voltage 24V) System dynamic power (w): 180W Rising time: :Sl-2S Lowering time: :Sl-2S Working Temperature: -35°C~ 75°C Storage Environment : -10°C~65°C Material: A3 steel, with anti-rust paint Color: Optional  Weight: 0.3T/0.4T Casing Size …

eSSL AIFACE-PLUTO 4-Inch Visible Light System User Guide

eSSL AIFACE-PLUTO 4-Inch Visible Light System Overview Installation Environment Please refer to the following recommendations for installation Recommended Palm Gestures Note: Place your palm within 30-50 cm of the device. Place your palm in the palm collection area, such that the palm is placed parallel to the device. Make sure to keep space between your …

eSSL SAFE201 SafeLock User Manual

USER MANUAL SAFE 201 SAFE201 SafeLock Please read this instruction carefully and follow instructions before operating the safe. We don’t install batteries at the factory to avoid corrosion. You will need to open the door with the emergency key in order to install the batteries. How to use the emergency key These keys allow you …

eSSL FHT-TL-139 Tripod Turnstile User Manual

eSSL FHT-TL-139 Tripod Turnstile Brief introduction The electronic tripod turnstile, which is an electric control mechanism installed in the building structure, is used to form an access control system. The rotation unit consists of three tubular arms which are positioned at 120 ° intervals so that when the unit is at rest ,one arm will …

eSSL-HG-1500 Sliding Gate User Manual

eSSL-HG-1500 Sliding Gate User Manual Warning To The Installer And USer CAUTION! For personal safety it is important to follow all the instructions carefully. Incorrect installation or misuse ofthe product may cause serious harm to people . Keep the instructions in a safe place for future reference. This product was designed and manufactured strictly for …

eSSL inBIO160 Single Door Fingerprint Access Control System Instruction Manual

eSSL inBIO160 Single Door Fingerprint Access Control System Installation and Connection Guide Cautions Please note the following cautions. Mis-operation may lead to personal injury or equipment failure: Do not energize the system before installation is complete; never carry out installation activities when the system is energized. All perip heral devices must be grounded. The conduits …

eSSL-HG-1200 Sliding Gate User Manual

HG-1200 Sliding Gate User Manual User Manual Sliding Gate eSSL-HG-1200 www.esslsecurity.com WARNING TO THE INSTALLER AND USER CAUTION! For personal safety, it is important to follow all the instructions carefully. Incorrect installation or misuse of the product may cause serious harm to people. Keep the instructions in a safe place for future reference. This product …

eSSL JS-32E Proximity Standalone Access Control User Manual

JS-32E Proximity Standalone Access Control User Manual Description The device Is a standalone access control and proximity card reader which supports EM & MF card types. It builds in STC microprocessor, with strong anti-interference ability, high security and reliability, powerful function, and convenient operation. It’s widely used in high-end buildings, residential communities, and other public …

eSSL RS485 5-Inch Visible Light User Guide

eSSL® RS485 5-Inch Visible Light User Guide www.esslsecurity.com Overview Device Installation Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Fix the back plate on the wall using wall mounting screws. Attach the device to the back plate. Fasten the device to the back plate with a security …