Zippo Windproof Lighter: Instructions and Safety Guide

Safety Warnings

⚠️ WARNING

Flammable. Keep out of reach of children.
Do not expose to temperatures above 50°C (122°F).
Do not puncture or incinerate.

⚠️ CAUTION

Read all instructions before use.
Keep away from face and clothing.
Do not use for prolonged periods without ventilation.
May cause serious injury or death.

IMPORTANT SAFETY INSTRUCTIONS

Always use Zippo Premium Lighter Fluid.
Do not use gasoline, kerosene, or other fuels.
Ensure the lighter is properly assembled before use.
Keep the lighter closed when not in use.
Handle with care, as the lighter can become hot.
Store in a cool, dry place.
Dispose of used flints properly.

How to Use Your Zippo Lighter

How to Fill Your Zippo Lighter

An illustration shows a hand holding a Zippo lighter. The windproof shield and wick assembly are shown being removed from the lighter case. The cotton wadding inside the case is depicted as being soaked with lighter fluid. Finally, the wick assembly is shown being reinserted into the fluid-soaked wadding.

Remove the windproof shield and wick assembly from the lighter case.
Soak the cotton wadding with Zippo Premium Lighter Fluid. Do not overfill.
Reinsert the wick assembly into the lighter case.
Wipe away any excess fluid.
Allow the fluid to saturate the wick for a few minutes before lighting.

How to Replace the Flint

A sequence of illustrations demonstrates replacing the flint. First, the wick assembly is removed. Then, a screw at the bottom of the lighter is shown being unscrewed to release the flint spring. The old flint is removed, and a new flint is inserted into the flint tube. The flint screw is reinserted, and finally, the wick assembly is put back into the lighter.

Remove the windproof shield and wick assembly.
Unscrew the flint screw located at the bottom of the lighter.
Remove the old flint.
Insert a new Zippo flint into the flint tube.
Reinsert the flint screw and tighten it securely.
Reinsert the wick assembly.

How to Adjust the Wick

An illustration shows how to adjust the wick. The wick is shown protruding from the wick tube. A pair of pliers is used to pull the wick up slightly. The wick is then shown being trimmed to the desired length.

Remove the windproof shield and wick assembly.
If the wick is too long, use pliers to pull the wick up slightly.
Trim the wick to the desired length, ensuring it is flush with the top of the wick tube.
Reinsert the wick assembly.

General Operation and Maintenance

For optimal performance and longevity:

Always ensure the lighter is properly filled and assembled before use.
Keep the lighter closed when not in use to conserve fluid and prevent accidental ignition.
Refill with Zippo Premium Lighter Fluid as needed.
Replace the flint when the lighter fails to ignite consistently.
Clean the lighter periodically with a soft cloth.
Store in a cool, dry place away from direct sunlight and heat sources.
Dispose of used flints and fluid responsibly according to local regulations.
Never leave a lit lighter unattended.
Do not expose to open flames or high temperatures.
Keep away from flammable materials.
Use only genuine Zippo flints and Zippo Premium Lighter Fluid.
Ensure the wick is properly trimmed and centered for an even flame.

	Zippo Flex Neck Utility Lighter XL: Instructions and Safety Guide Comprehensive instructions for refilling, operating, and adjusting the Zippo Flex Neck Utility Lighter XL, along with essential safety warnings and guidelines.
	Zippo Butane Torch Lighter Inserts: Instructions, Warnings, and Warranty Comprehensive guide to Zippo Butane Torch Lighter Inserts (#Z8A19, #Z8B19), including safety warnings, operating instructions, butane filling, flame adjustment, and a two-year limited warranty.
	Zippo Windproof Lighter Instructions and Care Comprehensive guide to using and maintaining your Zippo windproof lighter, including safety precautions and warranty information.
	Zippo Pipe Lighter Insert Instructions and Safety Guide Comprehensive instructions for installing, using, and maintaining the Zippo Pipe Lighter Insert, including essential safety warnings and tips for optimal performance.
	Zippo Yellow Flame Pipe Butane Lighter Insert Z8A22 - Instructions & Safety Guide Comprehensive guide for the Zippo Yellow Flame Pipe Butane Lighter Insert (Model Z8A22). Includes operating instructions, butane filling, ignition, flint replacement, safety warnings, and performance tips.
	Zippo Butane Torch Instruction Manual Comprehensive guide to operating, filling, and maintaining the Zippo Butane Torch. Includes safety instructions, troubleshooting tips, and warranty information.
	How to Repair a Stuck Flint Wheel on a Zippo Lighter A step-by-step guide on how to fix a stuck flint wheel on a Zippo lighter, including necessary tools and instructions for disassembly and reassembly.
	Zippo HeatBank 3 Instructions: Rechargeable Hand Warmer & Portable Charger Guide Comprehensive instructions for the Zippo HeatBank 3, covering safety warnings, operating procedures, charging, mobile device charging, and battery disposal. Learn how to use your Zippo HeatBank 3 effectively and safely.