Akko MOD007B PC Multi-modes Mechanical Keyboard User Manual
Quick Start Guide
Introduction & Setup
Thank you for choosing the Akko MOD007B PC. This manual provides essential information for setup and usage.
Packing List
- Akko MOD007B PC Keyboard
- USB Cable
- User Manual
System Requirements
Windows® XP / Vista / 7 / 8 / 10 or higher version.
USB Connection
Connect the keyboard to your computer using the provided USB cable. This is the primary method for initial setup and can also be used as a wired connection.
Connection Modes & Indicators
The MOD007B PC supports multiple connection modes: Bluetooth, 2.4G Wireless, and Wired.
Bluetooth Pairing
To pair via Bluetooth: Press Fn+E/R/T to select Bluetooth device 1/2/3. Press and hold the same key combination for 3 seconds to enter pairing mode. The corresponding indicator light (Red for E, Blue for R, Yellow for T) will flash quickly. Once connected, the light stays on for 2 seconds then turns off. If pairing fails, the light turns off and the keyboard enters sleep mode.
2.4G Wireless Pairing
To pair via 2.4G: Press Fn+Y to select 2.4G mode. Press and hold Fn+Y for 3 seconds to enter pairing mode. Insert the 2.4G receiver. The indicator light will flash quickly. Successful pairing is indicated by the light staying on for 2 seconds. If no device is found within 30 seconds, the indicator turns off and the keyboard enters sleep mode.
Wired Mode
Connect via USB cable. The keyboard typically defaults to wired mode when connected.
Indicator Lights Summary
Status | Indicator Location | Re-Connecting | Pairing | Connected |
---|---|---|---|---|
Bluetooth Device 1 | LED for Key E | Red light blinks slowly | Red light blinks fast | Red light stays on for 2 seconds, then turns off |
Bluetooth Device 2 | LED for Key R | Blue light blinks slowly | Blue light blinks fast | Blue light stays on for 2 seconds, then turns off |
Bluetooth Device 3 | LED for Key T | Yellow light blinks slowly | Yellow light blinks fast | Yellow light stays on for 2 seconds, then turns off |
2.4G Wireless Device | LED for Key Y | Green light blinks slowly | Green light blinks fast | Green light stays on for 2 seconds, then turns off |
Wired Mode | LED for Key U | N/A | N/A | White light stays on for 2 seconds, then turns off |
Battery & Lock Status Indicators
Status | Indicator Location | Indicating Mode |
---|---|---|
Low Battery | Independent LED Indicator (near spacebar) | Red light blinks slowly |
Charging | Steady red | |
Fully Charged | Light off | |
Caps Lock | LED for Caps Key | Steady white |
Windows Lock | LED for left Win Key | Steady white |
Battery Level Check
Press Fn + Space combination keys to check the battery level:
- Below 30%: Space key shows Red light.
- 30-50%: Space key shows Orange light.
- 50-70%: Space key shows Purple light.
- 70-90%: Space key shows Yellow light.
- 90-100%: Space key shows Green light.
Hotkeys & System Commands
Windows Hotkeys
Key | Function | Key | Function | Key | Function |
---|---|---|---|---|---|
F1 | My Computer | F6 | Play/Pause | Insert | Insert |
F2 | F7 | Previous Song | M | Mute | |
F3 | Windows Search | F8 | Next Song | Fn + , | Decrease Volume |
F4 | Browser Homepage | P | Print Screen | Fn + . | Increase Volume |
F5 | Multimedia Player | C | Calculator | Fn + W | Swap WASD with Arrow Keys |
Windows System Commands
- Lock Windows Key: Press Fn + Left Win Key.
- Restore Factory Settings: Hold down Fn and press ~ key for 5 seconds.
- Revert Ctrl into Menu Key: Hold down Fn and press Right Ctrl for 3 seconds.
Knob Function
The rotary knob controls Volume or Light Brightness. Rotate to adjust; press to switch between functions.
Mac System Commands
Key | Function | Key | Function | Key | Function |
---|---|---|---|---|---|
F1 | Decrease display brightness | F7 | Skip back (Audio) | F11 | Volume down |
F2 | Increase display brightness | F8 | Pause/Play (Audio) | F12 | Volume up |
F3 | Open Mission Control | F9 | Skip forward (Audio) | Left Win | Option |
F4 | Activate Siri | F10 | Mute | Left Alt | Command |
Right Alt | Command | Fn + (F1~12) | Toggle between F1-F12 and media/system functions | Fn + L | Toggle Backlight On/Off |
Backlight Settings
Customize backlight effects using the following key combinations:
Key Combination | Function |
---|---|
Fn + - | Slower Animation |
Fn + = | Faster Animation |
Fn + ↑ | Increase Brightness |
Fn + ↓ | Decrease Brightness |
Fn + ← | Set animation direction to left |
Fn + → | Set animation direction to right |
Fn + Home | Cycles through effects: Static, Ripple, Aurora, Waterfall, Meteor. |
Fn + PgUp | Cycles through effects: Starry, Neon, Wave, Layered, Fountain. |
Fn + End | Cycles through effects: Breathing, Aurora, Sine Wave, Raindrop, Path. |
Fn + PgDn | Cycles through effects: Gentle Rain, Snow, Cluster, Two Birds One Stone, Hundred Flowers. |
Fn + \ | Switch backlight to 7 single colors with RGB loop effect. |
Fn + L | Toggle Backlight On/Off |
Customization & Warranty
Key/Lighting Effects Customization
The Akko Cloud driver allows for detailed customization of lighting effects and key assignments across the keyboard's three working modes. It can also synchronize with music rhythm.
Download the Akko Cloud driver from the official website: en.akkogear.com.
AKKO Warranty and Service Statement
Akko provides a one-year warranty for customers in mainland China. For customers in other regions, please contact your local seller or Akko distributor for specific warranty policies.
If the warranty period expires, customers are responsible for repair costs. Akko may provide self-repair instructions, but users assume full responsibility for any damages incurred during self-repair.
Defects arising from product disassembly, improper usage, or incorrect installation are not covered under warranty.
Return and warranty policies may differ based on the platform and the specific distributor at the time of purchase.
Company Information
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou First Industrial Zone, Bao'an District, Shenzhen, China
Tel: 0755-23216420
Website: www.akkogear.com
Origin: Shenzhen, China
Precautions & Warnings
Precautions: Man-made damage, including immersion in liquids, accidental drops, or pulling wires with excessive force, is not covered. Please handle this electronic product with care.
Warning: Water and beverages must not be poured into the keyboard.
Certifications: CE, FC
Manufacturing: Made in China
Connect with Akko
Visit the official website for more information and support: www.akkogear.com
Follow Akko on social media:
- TikTok
- YouTube
Social Media Handle: @akkogear