Akko 5075B Multi-mode RGB Mechanical Keyboard

Product Overview

This document provides an overview and setup instructions for the Akko 5075B Multi-mode RGB Mechanical Keyboard. It supports multiple connection modes, including Bluetooth and 2.4G wireless, and features customizable RGB lighting.

The keyboard is designed for versatile use, offering a premium typing experience with customizable features.

Connection Modes

The keyboard supports three connection modes:

• Mac/Win Mode: For compatibility with macOS and Windows operating systems.
• Bluetooth (BT) ?: For wireless connection via Bluetooth.
• 2.4G Wireless ?: For wireless connection using the included 2.4GHz USB receiver.

Visual representations of the keyboard layout for Mac/Win and Bluetooth/2.4G modes are provided, highlighting key differences in modifier keys and the rotary knob's placement.

Combination Keys

The keyboard features numerous combination keys using the 'Fn' key to access advanced functions. These include:

Rotary Knob Function ?️

The rotary knob offers intuitive control:

• Press: Mute/Unmute audio ?.
• Rotate Counter-clockwise: Decrease volume ?.
• Rotate Clockwise: Increase volume ?.

Bluetooth Pairing ?

To pair via Bluetooth:

1. After powering on the keyboard, press Fn + E, Fn + R, or Fn + T to enter Bluetooth mode.
2. Long press the selected key combination (Fn + E/R/T) to initiate pairing.
3. The indicator light for the selected Bluetooth channel will blink, indicating it's ready to pair.

The keyboard can store up to three Bluetooth device pairings.

2.4G Wireless Pairing ?

To pair via 2.4G wireless:

1. After powering on the keyboard, press Fn + Y to enter 2.4G mode.
2. Long press Fn + Y to initiate pairing with the 2.4GHz receiver.
3. The indicator light for 2.4G will blink, indicating it's ready to pair.

Ensure the 2.4GHz USB receiver is plugged into your device.

Battery Level Check ?

To check the battery status:

1. After powering on the keyboard, press Fn + Spacebar.
2. The indicator lights will show the current battery level.

Indicator Lights

The keyboard features indicator lights to show connection status and modes:

Note: Specific LED behavior (e.g., blinking speed, solid color) may vary slightly.

Key/Lighting Effects Customization

The Akko 5075B keyboard is compatible with the VIA software, a widely recognized tool for configuring and personalizing keyboard settings.

Using VIA:

• VIA offers an intuitive interface to remap keys, create custom macros, and adjust lighting effects.
• For keyboards with VIA firmware, users can utilize VIA to personalize their experience.
• If you encounter connection issues with VIA, you may need to load a specific JSON file for your keyboard model.

Resources:

• VIA Web Version: https://usevia.app/
• VIA App Releases: https://github.com/the-via/releases/releases
• Download JSON Files:
  • https://en.akkogear.com/download/
  • https://akkogear.eu/pages/download-center

Akko Warranty and Service Statement

Akko provides a one-year warranty for customers in mainland China. For other regions, please contact your local seller or Akko distributor for specific warranty policies.

• If the warranty period expires, customers may be required to pay for repairs. Akko can provide instructions for self-repair, but users assume full responsibility for any loss or damage during self-repair.
• Defects resulting from disassembly, improper usage, or incorrect installation are not covered by the warranty.
• Return and warranty policies may vary by platform and are subject to the specific distributor at the time of purchase.

FCC Statement ⚠️

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Warning Statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

EU Declaration of Conformity

This declaration of conformity is issued under the sole responsibility of the manufacturer, Shenzhen Yinchen Technology Co., Ltd.

Manufacturer Information:

• Company Name: Shenzhen Yinchen Technology Co., Ltd
• Address: Bitou Community 1st Industrial Zone, Building 1 STE 101,201,301,401
• Email: Emily@akkogear.com
• Telephone: 0755-23216420

Product Information:

• Product Name: Mechanical Keyboard
• Model: 5075B
• Trade Mark: Akko

The product conforms to relevant Community harmonisation legislation and EC directives, including RED Directive 2014/53/EU, LVD Directive 2014/35/EU, and EMC Directive 2014/30/EU. It also complies with specified testing standards such as EN IEC 62368-1-2020+A11:2020, EN 50663: 2017; EN 62479: 2010, ETSI EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), and ETSI EN 300 328 V2.2.2 (2019-07).

Radio Equipment Directive 2014/53/EU:

• Frequency Bands: 2402MHz - 2480MHz
• Maximum Radio Frequency Power Transmitted: 10dBm

Signed on behalf of the Manufacturer:

Name: Wu Haiyan (Emily WU)
Position: Vice president
Date: [Date of declaration]

The CE marking indicates compliance with EU standards.

Disposal Information ♻️

The symbol ♻️ indicates that this product is classified as Electrical or Electronic Equipment. It should not be disposed of with other household or commercial waste at the end of its useful life.

The Waste of Electrical and Electronic Equipment (WEEE) Directive aims to recycle products using the best available techniques to minimize environmental impact, manage hazardous substances, and avoid landfill. Contact local authorities for information on correct disposal.

The product is made in China.