Multi-mode Mechanical Keyboard
Overview: Multi-mode Mechanical Keyboard
Connection Modes
This keyboard supports multiple connection modes:
- [2.4G Wireless]
- [Mac Mode]
- [USB Mode]
- [Windows Mode]
Combination Keys
| Key Combination | Functionality |
|---|---|
| Fn + F1 | Function Key |
| Fn + F2 | Function Key |
| Fn + F3 | Function Key |
| Fn + F4 | Function Key |
| Fn + F5 | Function Key |
| Fn + F6/F8 | Function Key |
| Fn + F7/F7 | Function Key |
| Fn + F8/F9 | Function Key |
| Fn + W | Function Key |
| Fn + C | Function Key |
| Fn + ~ (5s) | Function Key |
| Fn + M/F10 | Function Key |
| Fn + >/F12 | Function Key |
| Fn + | Function Key |
| Fn + L | Function Key |
| Fn + [ | Function Key |
| Fn + ] | Function Key |
| Fn + P | Function Key |
| Fn + O | Function Key |
| Fn + L_Win | Function Key |
| Fn + ↑ | Function Key |
| Fn + ↓ | Function Key |
| Fn + ← | Function Key |
| Fn + → | Function Key |
| Fn + \ | Set the backlight color to 7 single color with RGB loop effect in all RGB Lighting modes. |
| Fn + PGDW | Cycle through effects: Effect1, Effect2, Effect3, Effect4, Effect5. |
| Fn + PGUP | Cycle through effects: Effect6, Effect7, Effect8, Effect9, Effect10. |
| Fn + End | Cycle through effects: Effect11, Effect12, Effect13, Effect14, Effect15. |
| Fn + Home | Cycle through effects: Effect16, Effect17, Effect18, Effect19, Effect20. |
Battery Level Check
In wireless mode, press the Fn + Spacebar combination keys to check the battery level:
- Below 30%: Number 1-2 keys show a red light.
- Below 40%: Number 1-3 keys show a green light.
- Below 50%: Number 1-4 keys show a green light.
- Below 60%: Number 1-5 keys show a green light.
- Below 70%: Number 1-6 keys show a green light.
- Below 80%: Number 1-7 keys show a green light.
- Below 90%: Number 1-8 keys show a green light.
- Below 100%: Number 1-9 keys show a green light.
- Fully charged: Number 1-0 keys show a green light.
Wireless Pairing
Bluetooth Pairing
After powering on the keyboard, press Fn + E/R/T to enter Bluetooth mode. Short press to switch modes, long press for 3 seconds to pair.
2.4G Pairing
After powering on the keyboard, press Fn + Y to enter 2.4G mode. Short press to switch 2.4G, long press for 3 seconds to pair.
Indicator Lights
| Indicator | LED Status | BT1 | BT2 | BT3 | 2.4G |
|---|---|---|---|---|---|
| Reconnecting | Blue | Blue | Blue | Green | |
| Pairing | Blue (2s) | Blue (2s) | Blue (2s) | Green (2s) | |
| Successfully Connected | Blue | Blue | Blue | Green | |
| Caps Lock | White | ||||
| Lower Left | Red | ||||
| Upper Right | White | ||||
| Left Win | White |
Compliance and Warranty
Restricted Substances
This section details the presence of restricted substances according to standards. '○' indicates the percentage content does not exceed the reference value, while '-' indicates an exemption.
| Component | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) | Diisobutylphthalate (DIBP) | Dibutylphthalate (DBP) | Butylbenzylphthalate (BBP) | Di(2-ethylhexyl)phthalate (DEHP) |
|---|---|---|---|---|---|---|---|---|---|---|
| Cable | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Circuit Board Assembly | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Plastic Parts | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Metal Parts | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Rubber Parts | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
NCC Warning
According to the Low Power Radio Frequency Device Management Regulations:
- Article 12: Devices that have passed type certification shall not alter frequency, increase power, or change original design characteristics and functions without permission.
- Article 14: The use of low power radio frequency devices shall not affect flight safety and interfere with legal communications. If interference occurs, the device shall be immediately suspended and improved until no interference is present. Legal communications refer to radio communications operating in accordance with telecommunications laws.
- Low power radio frequency devices must tolerate interference from legal communications or industrial, scientific, and medical radio frequency devices.
This device is intended for household use (Class B) and can be used in all regions.
This wireless equipment may cause radio interference during operation. The receiver is set to transmit and receive only from this equipment.
Company Information
Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou First Industrial Zone, Bao'an District, Shenzhen, China
Customer Support: 0755-23216420
Website: www.akkogear.com
Support Hours: 09:00 - 18:00 (Monday-Friday)
Akko Warranty and Service Statement
Akko provides a one-year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) to understand the specific warranty policy.
If the warranty period expires, customers will need to pay for repairs. Akko can provide instructions if users wish to repair the keyboard themselves, but users bear full responsibility for any losses incurred during self-repair.
Disassembling the keyboard without manufacturer/seller instructions will immediately void the warranty.
Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM, with national holidays observed.
Return and warranty policies may vary across different platforms and depend on the specific dealer at the time of purchase.
*The above warranty information applies only to mainland China.
Model Number: 503-5MR01-001
Standard Implemented: GB/T 14081-2010
Made in China
