GGM Gastro Heated Cupboard - Instruction Manual
Introduction
This manual provides essential information regarding the model, responsibilities, and copyright for the GGM Gastro Heated Cupboard. It is intended for operators and covers installation, operation, maintenance, and disposal.
Symbols Used: The manual may use various symbols to denote specific information. Please refer to the relevant sections for their meanings.
⚠️ ATTENTION! Read the instructions carefully before using the appliance.
Data Plate
The data plate contains the identification and technical specifications of the product. It is typically located inside the appliance, on the upper right side of the heating panel.
Information found on the data plate includes:
- Model Type: 2015 42 29
- Article: HOTCP (Heated Cupboard)
- Power Supply Voltage: 220-240 Vac 1N
- Frequency: 50-60 Hz
- Max. Power Input: 2000 W
- IP Rating: IPX4 (Protection against splashing water)
- Origin: Made in Turkey
- Serial Number, Week, Year, Progressive Number
- Number of Phases
- Liquid Protection Level
- CE Mark
WARNING! Do not remove, tamper with, or obscure the "CE" mark. Refer to the "CE" plate data for all communication with the manufacturer. The "CE" mark must be destroyed upon appliance disposal.
Technical Data
Range of Heated Cupboards
| Specification | Value |
|---|---|
| Supply Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Max. Power Input | 2000 W |
| Max. Current Requirement | 10 A |
| Power Cord | Mmq-H05RN-F 3x1,5 |
| Max. Supply Voltage Variation | +/- 10% |
| Max. Frequency Variation (Continuous) | +/- 1% |
| Max. Frequency Variation (Short Period) | +/- 2% |
Installation and Commissioning
⚠️ ATTENTION! Electrical system work must be performed exclusively by a qualified electrician.
Before connecting the appliance:
- Remove packaging and protective film carefully, avoiding scratches.
- Position and level the appliance using adjustable feet for stability.
- Ensure the supply voltage matches the appliance's data plate and the mains voltage.
- Verify the electrical system can handle the current load and complies with local regulations.
- Ensure an efficient earthing system is present.
- For direct grid connection (without plug), a disconnection device compliant with overvoltage category III is required.
- If in doubt about earthing or electrical safety, have the system tested by a qualified electrician. The symbol ⏓ identifies the equipotential connection.
The manufacturer is not liable for connections made by unqualified personnel.
ATTENTION! Dispose of packaging materials according to current regulations.
This appliance is designed for storing and heating tableware. Any other use, such as heating food, is considered improper.
Diagram Descriptions
Installation Diagram
The installation diagram shows the overall dimensions of the heated cupboard. It depicts a rectangular unit with sliding doors on the front. Dimensions indicated are approximately 1000+2000 mm in width, 850/900 mm in height, and 600/700 mm in depth. The unit stands on adjustable feet.
Wiring Diagram
The wiring diagram illustrates the electrical connections for a 220-240V, 50/60Hz power supply. It shows the main switch (Interruttore Generale), a fan motor (Motore Ventola), and a heating element (Resistenza Riscaldante). The diagram indicates connections for Line (L) and Neutral (N).
General Rules
The manufacturer disclaims responsibility for faults or damage resulting from tampering. This appliance must be used by skilled, periodically trained personnel aware of safety and fire prevention regulations.
⚠️ ATTENTION! Contact with hot tableware can cause burns. Use appropriate safety equipment when handling objects.
⚠️ ATTENTION! Electrical system interventions must be performed solely by qualified electricians.
Use of the Appliance
Operating Elements
The control panel features:
- Button "A": Main power switch. When pressed to position "I", the appliance is powered on, indicated by a light. Pressing to "O" switches off power.
- Knob "C": Thermostat control. Turn clockwise to increase temperature (30-90°C), counter-clockwise to decrease. Turning to "O" position deactivates heating but keeps the appliance under power.
Operation
- Connect the appliance to the electric current.
- Turn on the main switch (A) to position "I".
- Set the desired temperature using the thermostat knob (C) (30-90°C). The fan ensures uniform heat distribution.
- Arrange tableware in two rows inside the compartment, leaving approximately 80 mm between them for air circulation. Avoid blocking air vents.
- To turn off heating, set knob "C" to "O".
- To completely switch off the appliance, set button "A" to "O" and disconnect the main power supply.
Cleaning
⚠️ ATTENTION! Before cleaning, turn off and unplug the appliance. Do not use direct water jets or high-pressure water streams. Ensure water does not enter the appliance.
- Remove all dishes before cleaning.
- Clean interior surfaces with a damp cloth and a neutral detergent, then rinse and dry thoroughly.
- Clean exterior stainless steel surfaces with lukewarm water and mild soap, rinse, and dry carefully.
- Do not use abrasive products, steel wool, or brushes.
- For long periods of inactivity, store the appliance in a cool, dry place.
Disposal and Recycling
At the end of its useful life, dispose of the appliance responsibly and in accordance with local regulations to protect the environment. The "CE" mark must be destroyed during disposal.
♻️ This symbol indicates that the product should not be disposed of with regular household waste.
