Ecler MIMO7272DN Digital Matrix

Digital Matrix with Dante™/AES67 Interface

Product Overview

The MIMO7272DN is a digital matrix featuring 72 audio inputs and 72 audio outputs, comprising 8 analogue inputs, 8 analogue outputs, 64 Dante™/AES67 digital inputs, and 64 Dante™/AES67 digital outputs. It offers a native internal matrix of 64x64 simultaneous input/output channels. Leveraging audio over IP technology, the MIMO7272DN facilitates signal transmission across a Local Ethernet network, eliminating cabling distance limitations. It is compatible with accessories from the WPNET Series, connected via Ethernet interface and PoE DC supply. This design ensures flexible and efficient installations. The MIMO7272DN can also execute EclerNet projects embedded within its processor and electronics engine, functioning as a UCP (User Control Panels) server within an EclerNet device network.

Key Features

Standard firmware only (no CONFERENCE firmware available)
72x72 audio input/output ports
64 input channels x 64 output channels digital audio native matrix
Audio input/output ports: 8 MIC/LINE analogue audio inputs, 8 LINE analogue audio outputs, 64 Dante™/AES67 digital input channels, 64 Dante™/AES67 digital output channels, 8 GPI ports, 8 GPO ports
2 Dante™/AES67 interfaces (primary and secondary) for redundant Dante™/AES67 network configuration
1 Ethernet programming and control interface (EclerNet, UCP, TP-NET, WPNET series control panels)
1 serial control port, RS-232 (TP-NET)
Embedded project manager and server for integrated UCP panels
Connection of peripherals via EtherNet network, including remote controls (WPNET series), PAGENETDN paging station, WP22DN wall panel, and Dante™/AES67 interface.

Applications

Commercial
Hospitality
Education
Corporate
Sports and wellness

Accessories & Compatible Devices

WPNET4KV
WPNET8K
WPNETEX
WP22DN
WPNETTOUCH
PAGENETDN

Technical Specifications

DSP

CPU: Quad core 64bits 1GHz
Sampling rate: 48 kHz
Latency analog IN to analog OUT: <4.3 ms.

Converters

Resolution: 24 bit
Dynamic range: AD: 110dB, DA: 115dB

Analogue

Input/Output: 8 Input/Output Terminal block (Symmetrical), 2 monitor output Terminal block (Symmetrical)
Headphones connector: Jack 1/4
Analogue input headroom: +27dBV = +30dBu
Max. output level: +18dBV = +21dBu
Input impedance: Balanced, >4kΩ

Phantom Power

+42VDC, 5mA max. software switched

Headphones

>200mW/200Ω

Frequency response (-3dB)

5Hz to 24kHz

Flatness

better than ±0.1dB

THD+Noise @ 1kHz, 0dBV input (line)

<0.004%

THD+Noise @ 1kHz, -40dBV input (mic.)

<0.008%

Output Noise floor FFT (20Hz - 20kHz)

better than 115dB

Interchannel crosstalk (20Hz - 20kHz)

better than 90dB (100dB typ.)

Channel Leakage (20Hz - 20kHz)

better than 100dB (115dB typ.)

CMRR 20Hz-20kHz

65dB typ.

DANTE™/AES67 Audio interface

DANTE™/AES67 Network Tx/Rx channels: 64/64 (Brooklyn) (32/32 flows)
Latency: 1 / 2 / 5 ms (selectable)
Connector: 1xRJ45 primary, 1xRJ45 secondary
Cable length between devices: 100m CAT5e/CAT6

Processing

Input level (x64): Range: from Off to 0 dB; Mute: Yes; Signal Polarity reverse: Yes; Metering: VU+clip pre & post fader
Output level (x64): Range: from Off to 0 dB; Mute: Yes; Solo: Yes; Signal Polarity reverse: Yes; Metering: VU+clip pre & post fader
Output gain (x64): Range: from 0 to +6 dB
Input delay (x64): from 0 to 1000 ms. Units: sec/ms/m/cm.
Output delay (x64): from 0 to 1000 ms. Units: sec/ms/m/cm.
Parametric EQ types (4max/input - 8max/output): Bypass / On-Off all channels; Param Eq. Freq: 20Hz-20kHz; Gain: -60/+12 dB; Q: 0.3 to 200; Low & High Shelf 6/12 dB/oct; Low & High Pass 6/12 dB/oct; All Pass 1/2 order; Bypass On-Off
High & Low pass output X-over filters (x64): Butterworth in 6/12/18/24 dB/oct; Bessel in 12/18/24 dB/oct; Linkwitz-Riley in 12/24 dB/oct; Bypass On-Off
Input noise gate (x64): Bypass On-Off; Threshold: from -80 dBV to +18 dBV; Depth: 0 dB to 80 dB; Attack time: from 0.1 ms. to 500 ms.; Hold time: from 10 ms. to 3000 ms.; Release time: from 10 ms. to 1000 ms.
Input compressor / limiter (x64): Bypass On-Off; Threshold: from -36 dBV to +18 dBV; Knee: hard / soft; Ratio: inf:1 (limiter)
Input Frequency Shifter (x64) (Feedback Loop Reducer): Attack time: from 0.1 ms. to 500 ms.; Release time: from 10 ms. to 1000 ms.; Make up gain: from 0 to +10 dB; Per input. ON / OFF function
Output Limiter (x64): Bypass On-Off; Threshold: from -36 dBV to +18 dBV; Attack time: from 0.1 ms. to 500 ms.; Release time: from 10 ms. to 1000 ms.
Built in Signal Generator: Sine: from 20 Hz to 20 kHz; Polarity: from 20 Hz to 20 kHz; White noise; Pink noise
Stereo Linking: Adjacent input / output channels; Linked processing; Matrix routing linked
Mix Matrix: Size: 64x64; Analogue in/out ports: 8x8; DANTE™/AES67 network in/out ports: 64x64; Vol: Input, Output, Crosspoint; Mute: Set/Clear individual, row, column, all; Input/output Mono/stereo selector; Meter: Input/output VU and clip
Pager (x25): Input: IN1 to IN64; Priorities: 25 (1 max, 25 min); Depth: 0 dB to 80 dB; Attack time: from 5 ms. to 2000 ms.; Release time: from 50 ms. to 3000 ms.; Chime Source: None, Melody 1, Melody 2; Chime Volume: from -12dB to 0dB

Mechanical

Dimensions (WxHxD): 482.6 x 44 x 253 mm / 19 x 1.73 x 9.96 in.
Weight: 3.25kg / 7.17 lb.

Power Supply

Mains: 90-264VCA 47-63Hz
Power consumption: 30VA

Miscellaneous

Management Connectivity: Ethernet Base-Tx 10/100Mb, 1GB Auto X-Over CAT5e or better
GPI: 8, from 0 to 12VDC or TTL level
GPO: 8, 3 poles isolated relay; 1A, 48VDC max.
Aux. Power Supply for Remotes & GPI: +12VDC, 1.2A max. (short circuit protected)
Time and date retention (battery): > 3 months

Programming and control application

EclerNet Manager: From v6.00

A&E Specifications

The digital matrix with native processing shall provide up to 64 x 64 audio channels individually configurable over EclerNet Manager Software. It shall support 8 analogue I/O and 64 digital I/O channels configurable as either Dante™ or AES67 formatted networked audio. It shall include 2 Dante™/AES67 interfaces (primary and secondary), available for configuration of redundant Dante™/AES67 networks.

The digital matrix shall manage external control interfaces such as remote control touch screens, Dante™/AES67 paging stations, digital audio wall panel interfaces, remote controls panels, and networked amplifiers.

Programming and remote management shall be available via Ethernet using EclerNet Manager software (either point-to-point, with direct CAT5/CAT6 cable, or from an Ethernet network connection). Remote control via custom control panels UCP (User Control Panels). iOS and Android remote control app available (Ecler UCP V2). Remote control from third-party systems shall be available using TP-NET control protocol through Ethernet or RS-232 ports.

On the front panel, the matrix shall include Power, Dante™/AES67 and Data status LEDs, Inputs and outputs signal level indicator, monitor output jack and monitor level knob. On the rear panel, the matrix shall include 8 analogue I/O and 2 monitor outputs (euroblock connector), 8 GPI and 8 GPO general purpose controls (euroblock connector), RS-232 port (DB9 connector), Ethernet, Primary and Secondary Dante™/AES67 RJ-45 ports.

All internal processing shall be digital (DSP). The DSP shall include Matrix router-mixer, from any input to any output (analog and/or digital Dante™/AES67) with adjustable crosspoint level, treatment of channels in mono or stereo mode, level, mute, vumeters and phase adjustment in inputs and outputs, internal signal generator (sinusoidal signal, pink noise, white noise, polarity test), parametric EQ, delays, noise gate, compressor on input channels, compressor / limiter on outputs, priorities (ducking) between input channels, virtual and physical paging consoles. Configuration memory management (presets). Events scheduled on a calendar basis.

Audio conversion shall be 24-bit, 48 kHz. The dynamic range shall not be lower than 110 dB, A-weighted with a maximum input level of +27 dBu and maximum output level of +21 dBu.

The dimensions of the matrix shall be 482.6 x 44 x 253 mm. The weight shall be 3.25 Kg.

The digital matrix shall be the ECLER MIMO7272DN.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

For technical queries contact your supplier, distributor or complete the contact form on our website, in Support / Technical requests.

Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com

	Ecler MIMO4040CDN Digital Matrix Technical Data Sheet Technical specifications and features of the Ecler MIMO4040CDN digital matrix, a conferencing matrix with AEC and Dante/AES67 interface, offering 40x40 audio channels, advanced processing, and versatile connectivity.
	Ecler MIMO4040CDN Digital Matrix: Technical Specifications and Features Detailed technical data sheet for the Ecler MIMO4040CDN conferencing digital matrix, featuring 40x40 audio channels, AEC, Dante, and AES67 connectivity. Explore key features, applications, and specifications.
	Ecler PAGENETDN Dante/AES67 Paging Station User Manual Comprehensive user manual for the Ecler PAGENETDN, a digital paging station and control touch-screen with Dante/AES67 audio capabilities. It covers installation, configuration, operation, technical specifications, and troubleshooting.
	Ecler MIMO7272DN Digital Matrix User Manual User manual for the Ecler MIMO7272DN digital audio matrix with DANTE/AES67 interface, covering installation, features, operation, and technical specifications.
	Ecler MIMO7272DN Digital Audio Matrix User Manual Comprehensive user manual for the Ecler MIMO7272DN, a 72x72 digital audio matrix with DANTE™/AES67 interface, covering installation, features, technical specifications, and TP-NET protocol.
	Ecler MIMO7272DN Digital Matrix User Manual User manual for the Ecler MIMO7272DN Digital Matrix with DANTE™/AES67 Interface, covering features, installation, operation, and technical specifications.
	Ecler MIMO7272DN Digital Matrix User Manual Comprehensive user manual for the Ecler MIMO7272DN digital audio matrix with DANTE™/AES67 interface. Covers installation, features, technical specifications, and TP-NET protocol.
	Ecler MIMO4040CDN Digital Matrix User Manual User manual for the Ecler MIMO4040CDN digital audio matrix, detailing its features, installation, operation, and technical specifications, including Dante/AES67 interface and AEC functionality.