Instruction Manual Alarm Clock/Bluetooth Speaker KA6060
General Configuration
When you open the package, please check if it contains the following accessories:
- 1 alarm clock
- 1 manual
- 1 Type-C USB cable (1 metre)
Keep the clock and cable out of reach of infants or children. If any small part is swallowed, seek medical treatment from a doctor immediately.
Please Avoid:
- Using the product near flammable objects and heat sources
- Using the product in settings with high temperature or humidity (e.g. bathroom). This product does not have a waterproof feature
- Disassembling or modifying the product
- Subjecting the product to any impact or brute force
Product Specification
- Power supply: DC 5 V-- 1A
- Bluetooth version: V5.0
- Rechargeable battery type: 18650
- Rechargeable battery capacity: 1200mAh, 4.44Wh
- Rechargeable battery voltage: 3.7V
- Charging Time: 5-6 hours (from no power to indication light off)
- Working Time: 4-6 hours
- Wireless transmission distance: Within 10 metres
- Transmission power: CLASS2, 4dbm
- Sensitivity: -80dBm<0.1%BER
- Frequency range: 2.402GHz-2.480GHz
- Support agreement: A2DP/AVRCP
- Audio signal to noise ratio: ≥75dB
- Speaker impedance: 4Ω
- Speaker power: 3W*1
- Working temperature: 0°C ~ 40°C
- Product storage temperature: 10°C ~ 30°C
Features
- Time (12/24Hr format), Month, Date, and Temperature display on the same screen
- Time accuracy: ±2 sec/day
- Calendar: 2000/1/1 - 2099/12/31
- 3 groups of alarm (A1, A2, A3)
- 3 levels of LED brightness (L1, L2, L3)
- Night mode (22:00-05:59 dimmer display)
- Temperature detecting range: -10°C ~ +50°C (°C format only)
- Temperature resolution: 1°C
- Temperature accuracy: ±2°C
- Sound control mode (power saving mode)
- Bluetooth speaker
- 1 built-in CR2032 button cell for time memory
- 1 built-in rechargeable 18650 battery for clock and Bluetooth speaker use
Buttons
- Power button
- Settings button
- Up button
- Down button
Start-up
Turn on/off LED display: Hold Settings button + Up button together for 2 seconds to turn on the LED display if using it for the first time. Hold Settings button + Up button together for 2 seconds again to turn off the LED display.
Calendar Setting
When the year flashes, press the Up button or Down button to adjust the value step by step. Hold the buttons to adjust more quickly. Press the Settings button to confirm and skip to the month setting.
When the month flashes, follow the same process to adjust the value. Confirm with the Settings button and proceed to the date.
When the date flashes, adjust similarly, confirm with the Settings button, and move to the time display format setting.
Time Display Format Setting
When 12Hr or 24Hr format flashes, press the Up button or Down button to switch between the two formats.
Under 12Hr format, the PM indication light will appear for afternoon times.
Press the Settings button to confirm and move to the next time setting.
Time Setting
When the hour flashes, press the Up button or Down button to adjust step by step. Hold the buttons to adjust more quickly. Confirm with the Settings button to proceed to minutes.
When minutes flash, adjust similarly and confirm with the Settings button to move to alarm 1 (A1) settings.
Alarm 1 Setting
When "--:A1" flashes, press the Up button or Down button to turn the alarm on or off:
- "--:A1" means alarm 1 is OFF.
- "ON:A1" means alarm 1 is ON. When active, an alarm symbol appears on the screen.
Press the Settings button to confirm and move to alarm 1 hour settings.
Adjust the hour and minute values for alarm 1 using the Up button or Down button, confirming each with the Settings button.
Alarm 2 Setting
Follow the same process as Alarm 1:
Adjust ON/OFF status, hour, and minute values step by step using the Up button and Down button, confirming each with the Settings button.
Alarm 3 Setting
Follow the same process as Alarm 1 and 2. Ensure all steps are confirmed using the Settings button.
Workday Alarm Setting
When "--:E" flashes, press the Up button or Down button to toggle the workday alarm function:
- "ON:E" means the alarm will ring Monday to Friday only.
- "--:E" means the alarm will ring every day.
Confirm the setting with the Settings button.
LED Brightness (L1~L3)
3 levels of LED brightness can be selected:
Hold the Settings button for 2 seconds to enter the brightness level setting mode.
Use the Up button or Down button to select brightness:
- L1 is the dimmest level, L3 is the brightest.
Confirm the desired level with the Settings button.
Sound Control System
Press the Settings button to toggle sound control:
- "ON:SD" means sound control function is ON (LED display always on).
- "--:SD" means sound control function is OFF (LED display turns off after 15 seconds).
Loud sounds (over 60dB) or tapping the clock lightly will activate the LED display for 15 seconds.
Bluetooth
Hold the Power button for 3 seconds to activate Bluetooth. A tone will sound.
Search for and connect to "WOOD SHOW SPEAKERS." A beep will confirm successful connection.
Hold the Power button again for 3 seconds to turn off Bluetooth.
Charging Indication Light
When charging, a red light will show at the back of the product. This light disappears when the battery is fully charged.
Warranty
There is a two-year warranty against manufacture defects on all Karlsson clocks, valid from the date of purchase.
Maintenance
A soft cloth may be used to clean your clock. Do not use corrosive cleaner or chemical solution on the clock.
WEEE Symbol
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal.
