Key Features
- Pre-wired factory-set 30/50 Pressure Switch
- Designed for shallow well applications (0' - 25' depth)
- Heavy-duty 115/230 dual voltage open drip-proof motor, preset at 230 V
Installation / Assembly Overview
This section outlines the typical setup for the shallow well jet pump system.
Diagram Description: The diagram illustrates the pump connected to a water system. It shows a 'Tank' (Tanque) connected via a 'Priming Tee and Plug' (Tapon y conector en T para cebar) to the pump's intake. The pump output connects to a 'Check Valve' (Válvula de retención), followed by another 'Priming Tee and Plug'. This leads to a 'Well Seal' (Sello de pozo), then a 'Pipe' (Tubo), and finally a 'Foot Valve with Strainer' (Válvula de fondo con coladero) at the bottom of the well. Depth indicators are provided: 25' Maximum (6.40m Máximo), 10' Minimum (3.04 m Mínimo), and 5' Minimum (1.52 m Mínimo).
Product Specifications & Features
- Corrosion resistant thermoplastic construction
- 11.5 GPM Max flow rate
- 25' Max vertical lift
- 64 Max PSI
- Suction pipe size 1-1/4" FNPT
- Superior performance to depths of 25' or less
Electrical Setup
The pump is pre-wired at 230V.
Electrical Diagram Description: An illustration shows the electrical connection. It indicates that if the power source is 115V, the user should remove the electrical housing cover, flip the switch to the 115V position, and then replace the cover.
Customer Support
For questions, problems, or missing parts, please contact Everbilt Customer Service:
Hours: 8 a.m. - 6 p.m., EST, Monday - Friday
Phone: 1-844-883-1872
Website: HOMEDEPOT.COM
