Takstar TS-K300 Series Wireless Microphone

Preface

Dear Customer,

Thank you for purchasing Takstar TS-K300 Series Wireless Microphone. To better understand and use the product, please read this manual thoroughly. If you have any questions or suggestions, please contact our local dealer.

Features

• Plug and play, no setup required, stable signal up to 25 m.
• UHF-band anti-howling, 16 adjustable frequencies for multi-set use.
• Clear and rich sound with dynamic mic capsule.
• Flexible volume adjustment to suit different occasions.
• LED display with frequency and battery status overview.
• Durable lithium-ion battery, up to 8 hours of use.
• All-metal body, sturdy and comfortable grip.
• 6.35 mm receiver interface, with 6.35 mm to 3.5 mm adapter.

Applications

For outdoor live performances, hosting events, and home KTV.

Package Contents

TS-K301 (Single Channel)

• 1 x TS-K300 Handheld Transmitter
• 1 x TS-K301M Receiver
• 1 x Microphone Windscreen
• 1 x Anti-slip Ring
• 1 x Adapter
• 1 x Charging Cable
• 1 x User Manual

TS-K302 (Dual Channel)

• 2 x TS-K300 Handheld Transmitter
• 1 x TS-K302M Receiver
• 2 x Microphone Windscreen
• 2 x Anti-slip Ring
• 1 x Adapter
• 1 x Charging Cable
• 1 x User Manual

Specifications

Handheld Transmitter

• Transducer: Dynamic
• Polar Pattern: Unidirectional
• Transmission Power: 10-30mW
• Dynamic Range: ≥ 90 dB
• Frequency Response: 70 Hz-18 kHz
• Frequency Range: CH1: 550MHz-565MHz; CH2: 570MHz-585MHz
• Transmission Distance: 25 meters (open area)
• Gain Adjustment: 0dB-20dB
• Battery Type: Lithium-ion
• Battery Spec: 3.7V/1200mAh
• Charging Method: Type-C
• Charging Time: 2 hours (5V/1A)
• Operating Time: 8 hours

Receiver

• Audio Output: 6.35mm line output
• Battery Type: Lithium-ion
• Battery Spec: 3.7V/1200mAh
• Charging Method: Type-C DC 5V=1A

Note: The above data are measured by Takstar laboratory which has the final interpretation right!

Function Descriptions

Handheld Transmitter

(1) Power Button: Long press to turn on/off the mic. With the device powered on, long press volume buttons (+/-) simultaneously for over 6 s to switch between channel 1 & 2.

(2) Display Screen: Shows frequency, volume, battery level, etc.

(3) Volume + Button: Press to increase volume (20 levels).

(4) Frequency Button: Adjust frequency in paired mode.

(5) Volume - Button: Press to decrease volume (20 levels).

Receiver

(1) Power Switch: Slide to turn on/off.

(2) Working Indicator: Flashes when powered on, stays on steadily when pairing is complete. Channel 1 will show a red light and channel 2 will show a blue light.

(3) Battery Indicator: Green light when on; red light when charging, off when fully charged.

(4) Type-C Port: Charge via Type-C cable connected to power adapter.

(5) Ø6.35mm Jack: Connect to audio devices with Ø6.35mm interface. Use included adapter for Ø3.5mm devices.

Operating Instructions

1. Pairing Method

• Turn on the power switches of the handheld mic and receiver.
• They will automatically pair and connect.
• When the receiver's working indicator changes to solid color, it indicates successful pairing.

2. Frequency Adjustment

• Turn on the power switches of the handheld mic and receiver, ensure they are paired successfully.
• Press the frequency button on the handheld mic to switch to the next working frequency.
• The receiver's working indicator will flash once and then return to solid, indicating successful frequency change.

3. Connecting Audio Devices

• Before connecting, lower the mic volume on the audio device (speakers, mixer, sound card) to avoid excessive sound pressure.
• Keep a distance between the mic and loudspeakers to prevent interference and feedback.
• Connect the receiver to the audio device's Ø6.35mm mic interface.
• If the audio device has a Ø3.5mm mic interface, use the included Ø6.35mm to Ø3.5mm adapter for connection.
• Adjust the mic volume using the volume button on the mic or the mic volume control on the audio device if the volume is too low.

4. Re-Pairing

• Press and hold the Power and SET buttons on the handheld microphone for 3 seconds until the display flashes a dashed line (entering pairing mode).
• Power on the receiver again. The working indicator will flash red/blue alternately. Quickly press the SET button and the indicator will turn solid, indicating pairing is complete. Channel 1 will show a red light and channel 2 will show a blue light.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

• Adjust the volume to proper level during operation, and do not place it close to human ears to prevent hearing damage.
• If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local after-sales service for repair.
• Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
• Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
• Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service.
• Power adapters, if used, must comply with CCC certification and meet the power requirements of the device.
• Do not dismantle or charge the battery without authorization, as it may damage the PVC coating and affect its conductivity, potentially causing short circuits, overheating, and fire hazards.
• For optimal performance, please fully charge the lithium-ion battery before its first use.
• Ensure the product is turned off while charging. Disconnect from power or switch it off before charging, and only use it once charging is complete.

Label Meanings

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet. For the latest version/more information, please visit our website: https://www.takstar.com

Copyright ©2024 TAKSTAR. TAKSTAR, 得胜 and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC, and/or other countries. All other trademarks are the property of their respective owners.

Product Service Guarantee (China Market Only)

Notes:

• This card is a warranty certificate. Please keep it properly. No warranty or replacement will be provided if lost.
• Warranty Period: Twelve months from the date of purchase.
• Free repair will be provided by the company, except for damages caused by force majeure.
• Repair points will charge fees at their discretion for damages caused by improper storage or use.
• No warranty for unauthorized disassembly and repair.
• The above warranty terms are only applicable to the China market (excluding Hong Kong, Macau, and Taiwan regions).

Customer Information

Repair Record (To be filled by repair personnel)

Contact Information

Guangdong Takstar Electronic Co., Ltd.

Address: No.2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China

Tel: 86 752 6383644 Fax: 86 752 6383952

Email: sales@takstar.com

Website: www.takstar.com

Scan for more product information [QR Code]