Takstar MS-189D Conference Microphone
User Manual and Product Information
Preface
Dear Customer, Thanks for purchasing our Takstar MS-189D conference microphone. We recommend reading this manual thoroughly for proper use. If you have any questions or suggestions, please contact our local sales service or the Takstar service hotline at 400 6828 333.
Product Features
- Metal housing for durability.
- Utilizes a high-quality condenser microphone capsule.
- High sensitivity and low noise for clear audio capture.
- Produces a warm and clear sound pickup.
- Features a tactile button switch.
- Equipped with a Red LED indicator for power status.
- Offers dual power supply options: battery and phantom power.
- Professional quality, easy to operate, energy-efficient, and environmentally friendly.
Standard Configuration
- 1 x MS-189D Microphone
- 1 x Ø6*6m M/F XLR Cable
- 1 x Windscreen
- 1 x User Manual
Applications
Ideal for conference speeches, conference systems, public broadcasting, and similar settings.
Technical Specifications
| Parameter | Specification |
|---|---|
| Transducer | Condenser |
| Polar Pattern | Unidirectional |
| Frequency Response | 19Hz - 20KHz |
| Sensitivity | -35dB ± 3dB (0dB = 1V/Pa at 1KHz) |
| Output Impedance | 340Ω ± 30% (at 1KHz) |
| Load Impedance | ≥ 1000Ω |
| Operating Voltage | 9-52V phantom power or two 1.5V AAA batteries |
Note: The above data is tested by Takstar laboratory and Takstar reserves the right of final interpretation.
Frequency Response Graph
The graph displays the microphone's frequency response from 20Hz to 20KHz. The Y-axis represents sensitivity in dBV/Pa, ranging from -30dB to -80dB. The curve shows a relatively flat response across the audible spectrum, with a slight boost in the higher frequencies, indicating good clarity for speech.
[Frequency Response Graph: Sensitivity (dBV/Pa) on Y-axis from -30 to -80, Frequency (Hz) on X-axis from 20 to 20K. The curve is relatively flat, with a slight rise in higher frequencies.]
Usage Instructions
- Connect the XLR output cable to the amplifier input.
- Set the amplifier volume to zero. Turn on the amplifier and microphone power switches, then gradually adjust the volume to the desired level.
- Maintain a speaking distance of approximately 5 to 30 cm from the microphone.
Cautions
- Avoid covering the microphone head or placing it near speakers to prevent feedback (howling sound). If this occurs, lower the amplifier volume, increase the distance from the speakers, and ensure the microphone and speakers are not facing each other directly.
- The microphone is sensitive due to its high sensitivity; handle with care to avoid drops or strong impacts.
- Store the microphone in a controlled environment to prevent damage from extreme temperatures or humidity.
- Ensure phantom power or batteries are connected properly. If there is no sound or the red indicator light is off, check the power connection.
Safety Warnings
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risks, injury, or property loss due to improper use, please read and observe the following items before use:
- Before operation, check if the power of the connected equipment matches this product's requirements. Adjust the volume to a proper level during operation. Do not operate at over-power or high-volume levels for extended periods to avoid product malfunction or hearing damage.
- If any abnormality occurs during use (e.g., smoke, strange odor), immediately turn off the power switch, unplug the power cord, and send the product to a qualified service center for inspection.
- Keep this product and its accessories in a dry and ventilated area. Avoid storing in humid or dusty environments for extended periods. Keep away from fire sources, rain, liquid intrusion, bumping, throwing, vibrating, or blocking ventilation openings to prevent malfunction.
- If the product is to be fixed on walls or ceilings, ensure it is securely mounted with adequate strength to prevent it from falling.
- Adhere to relevant safety rules during operation. Do not use the product in locations prohibited by laws or regulations to avoid accidents.
- Do not disassemble or repair the product without authorization to prevent injury. For any issues or service needs, please contact your local dealer or service center.
Product Service Guarantee
This section serves as a warranty certificate. Please keep it properly. Loss of this certificate will result in no warranty or exchange.
- Warranty Period: Twelve (12) months from the date of purchase.
- Takstar is responsible for free repairs for damages not caused by force majeure events.
- Repairs for damages caused by improper storage or use may incur charges at the service center's discretion.
- Unauthorized disassembly or repair will void the warranty.
- These warranty terms are applicable only to the China market (excluding Hong Kong, Macau, and Taiwan).
For service, please contact your local dealer or Takstar service hotline: 400 6828 333.
Manufacturer: Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Website: www.takstar.com
