CORN FLIP X1 User Manual

Safety Precautions

Please read the following safety guidelines before using the device.

Do not use the phone while you are driving.
Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them.
Keep your phone and its accessories away from children.
Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. People having active medical implants should keep their cell phone at least 15 cm away from the implant.
Permanent hearing loss may occur if you use earphones or headphones at high volume.
Use a wireless hands-free system (headphone/ headset) with a low power Bluetooth emitter.
Make sure the cell phone has a low SAR.
Keep your calls short or send a text message (SMS) instead. This advice applies specially to children, adolescents, and pregnant women.
Use cell phone when the signal quality is good.

Notice

Do not dismantle the device or accessories; otherwise, the manufacturer is not liable to pay for damages as the device and accessories are not covered by warranty.
Use only original batteries and charging devices.
Please back up your important data timely and keep them properly. The company is not liable for any failure to call or loss of data due to miss-operation, poor signal, or power cut, etc.
All the screens in this manual are for reference only, and some contents actually displayed may depend upon the presetting of the service provider or the network operator, or the SIM card. If any functions referred to in this manual are different from those of your device, please follow your device.
Do not use it in a place with flammable gas such as petrol pumps. The temperature recommended for using the device is 5-35°C. Do not touch the charger, power cable, or socket with wet hands. This may cause an electric shock.

Understanding Your Device

General Information

Your device encloses features, such as Camera, Video Player, Audio Player, FM Radio, etc. The SIM card inserted in slot 1 is called Master SIM, and the other one in slot 2 is known as Slave SIM.

Function of Keys

Key	Description
Master SIM Key	To make/answer a call from Master SIM. In the standby mode, press this key to view Call Logs.
Slave SIM /LSK/Menu Key	To make a call from Slave SIM. In the standby mode, press the key to access Main Menu.
RSK/Right Soft Key	Use RSK to execute the functions indicated at the right of the prompt bar on the screen.
End/Power Key	End an ongoing call. Press and hold this key to turn on or off the device.
Navigation Keys	In the editing mode, use the keys to move the cursor. In the standby mode, press the keys to access the function assigned to these keys.
Keypad	Use to enter numbers, letters, and special characters. Press RSK and # key to lock/unlock screen.

Getting Started

Please switch off your device before inserting or removing the battery/SIM card or memory card.

Installing SIM Card and Battery

Your device is provided with two SIM slots for two different SIM cards. The SIM card inserted in slot 1 is called Master SIM, and the other one in slot 2 is known as Slave SIM.

Remove the back cover of the device.
Hold the phone with the front facing downwards; pull the cover.
Insert the SIM cards and battery in the device.
Attach the battery.
Push the battery cover until it clicks into place.

Installing Memory Card

Your device supports T-Flash card, which is a multimedia memory card used to multiply the memory of the device. The T-flash card is small and should be pulled out and installed carefully and prudently in order to avoid any kind of damage.

Switch off your device.
Remove the battery cover.
Slide the T-Flash card into the slot.
Attach the battery.
Push the battery cover until it clicks into place.

Charging the Battery

The device prompts a warning tone and message stating insufficient battery when the battery power of your device is low. Please follow the instructions mentioned below to charge your device:

Plug the connector of the charger into the jack of the device.
Plug the charger into a standard AC wall outlet.

Note: When power charging is shown on the screen, it indicates that there is not enough power and you should now charge your device. When charging is complete, the battery icon will stop flashing. You must fully charge the battery before using the device for the first time. It is recommended to charge the battery for four hours before using the device for the first time. If the device is turned on during charging, you can still make or answer calls, but this will consume battery power, thus will extend the charging time of the device.

Switch On/Off the Device

To turn on/off the device, press and hold the End/Power Key. If you have enabled the SIM Lock function, then enter the PIN code (4 to 8 digits secret code of your SIM card). It is preconfigured and provided to you by your network operator or retailer. If you enter an incorrect PIN code 3 times in succession, your SIM card will be locked. To unlock it, you must obtain a code from your network operator.

FCC Caution

Part 15.21
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Part 15.105
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:
This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the head 0mm and 15mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

	CORN Flip K Quick Guide and Safety Information A quick guide and safety information for the CORN Flip K mobile phone, covering installation, charging, usage guidelines, and FCC compliance.
	CORN GT10 User Manual: Setup, Safety, and FCC Information Comprehensive user manual for the CORN GT10 feature phone, covering setup, battery charging, safety guidelines, and FCC compliance information.
	CORN M4 User Manual: Features, Safety, and Operation Guide Comprehensive user manual for the CORN M4 feature phone, detailing setup, operation, safety instructions, proper disposal, and FCC compliance information.
	CORN P60 Quick Guide - Setup and Safety Information A concise and SEO-optimized HTML guide for the CORN P60 smartphone, covering initial setup, SIM card insertion, safety precautions, and FCC compliance information.
	CORN X4 Quick Guide: Setup, Features, and Safety Information Get started with your CORN X4 smartphone. This quick guide provides essential information on setup, features, safety, and compliance, merging English and Spanish content into a primary English version.
	Shenzhen Huatongwei International Inspection Co., Ltd. Test Report for CORN Smart Phone Model P60 (WiFi 2.4GHz Band) This report details the compliance testing of the CORN Smart Phone Model P60 for its WiFi 2.4GHz band functionality. Conducted by Shenzhen Huatongwei International Inspection Co., Ltd., the tests cover various RF parameters including conducted and radiated emissions, output power, and spectral density, adhering to FCC CFR Title 47 Part 15 Subpart C standards.
	CORN C55 Pro Quick Guide: Setup, Features, and Safety Information Get started with your CORN C55 Pro smartphone. This quick guide covers setup, appearance, card insertion, dual SIM settings, safety information, and FCC compliance.
	CORN Star9 Max Quick Guide and Safety Information A quick guide for the CORN Star9 Max tablet, covering setup, features, safety precautions, and regulatory information in English and Spanish.