CORN Flip K Quick Guide
This document provides a quick guide and essential safety information for the CORN Flip K mobile phone.
Product Overview
The CORN Flip K is a feature phone designed for simplicity and ease of use. It features a flip design with a display, navigation keys, and a dial/answer key.
Key Components:
- Display: Shows information and menus.
- Receiver/Loud Speaker: For audio output during calls.
- Camera: For taking photos.
- Headphone Jack: For connecting audio accessories.
- Navigation Keys: Used to navigate through menus.
- Left Soft Key: Performs functions indicated on the display.
- Dial/Answer Key: Used to make and answer calls.
- Right Soft Key: Performs functions indicated on the display.
- Power On/Off Key: Turns the device on or off.
- Charging Port: For connecting the charger.
- Battery: Removable power source.
- Battery Cover: Secures the battery.
Getting Started
Installing the SIM Card and Battery
To begin using your device, you need to install a SIM card and the battery. Please refer to the diagrams for proper placement.
Charging the Battery
Before first use, charge the battery fully. Ensure the charger is connected properly to avoid damage. The charger should be easily accessible during charging. Once charging is complete, disconnect the charger from the power outlet.
Safety Instructions
Please read the following guidelines carefully. For comprehensive safety information, visit www.corn-mobile.com.
- Use only manufacturer-approved batteries, chargers, and accessories to prevent injury, fire, or explosion.
- Ensure the power outlet used for charging is installed near the device and is easily accessible.
- There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to instructions.
- Do not expose the device to physical impact or damage.
- Avoid contact between the charging jack, battery terminals, and conductive materials like metal or liquids.
- Operate the device within recommended temperatures (5°C to 50°C).
- Do not store the device near or in heaters, microwaves, cooking equipment, or high-pressure containers.
- Do not touch the charger or device with wet hands while charging.
- Avoid using the device outdoors during thunderstorms.
- Turn off the device in potentially explosive environments.
- Comply with all safety warnings and regulations for mobile device usage while operating a vehicle.
- If the device is cracked, broken, or becomes excessively hot, stop using it immediately.
- Do not use the camera flash or light close to the eyes of people or animals.
- Be aware that your phone may cause interference with aircraft equipment; follow airline regulations.
- Never attempt to disassemble the phone; unauthorized repairs can void the warranty.
- To prevent potential hearing damage, do not listen to audio at high volumes for extended periods when using headphones.
Network Information
The CORN Flip K supports the following network bands:
- GSM: 850/900/1800/1900MHz
- WCDMA: 850/900/1900/2100
- FDD-LTE: B2/B3/B4/B5/B7/B8/B12/B17/B28AB/B66
Correct Disposal
Waste Electrical & Electronic Equipment (WEEE): This marking indicates that the product and its electronic accessories (charger, headset, USB cable) should not be disposed of with household waste. Dispose of them according to environmental regulations.
Battery Disposal: This marking on the battery, manual, or packaging indicates that batteries should not be disposed of with other household waste.
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information: SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level. The actual SAR level of the phone while operating can be well below the maximum value. Generally, the closer you are to a wireless base station antenna, the lower the power output.
For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Non-compliance with the above restrictions may result in violations of RF exposure guidelines.