CORN Star9 Max Quick Guide
This document provides a quick guide for the CORN Star9 Max tablet, including setup, features, safety information, and regulatory compliance.
1. For More Information
Consult the quick guide in the packing box. Open the tablet service and enjoy the following services:
- Consult the manual.
- Get help through various channels such as self-service, intelligent questioning and answering, manual service, and question feedback. You can also search for stores, service network, and service policy.
- Open Settings > About tablet > Legal information to consult legal information.
2. Tablet Appearance
The tablet features the following components:
- USB Connector
- Headset Jack
- Camera
- Volume Key
- Power Button
- Microphone
- Speaker
Model: Star9 Max
Type: QUICK GUIDE
3. Card Insertion Guidance
Tips:
- Pay attention to the direction of inserting the SIM & Micro SD card as shown in the picture guidance.
- Please use the standard Micro-SIM card. Insertion of an unqualified card may damage the SIM card support.
4. Mobile Network
- Start up the tablet by long-pressing the power button.
- Follow the on-screen tips and enter the Home Screen.
- Navigate to Settings > Network & Internet > Mobile network to enable 4G data.
5. Safety Information
- Incompatible or unauthorized power supply, charger, and battery may cause fire, explosion, or other hazards. Only use accessories accepted by the manufacturer that match the device type. Using unauthorized accessories may cause accidents and violate the warranty and related national regulations. Contact an authorized service center for recognized accessories.
- Do not use high volume for extended periods to protect your hearing.
- Use the device at temperatures between -20°C and 70°C. Extreme temperatures may cause device failure.
- Do not expose the device or battery to high temperatures or heat-releasing equipment, such as direct sunlight, heaters, microwave ovens, or water heaters, as battery overheating may cause an explosion.
- When charging the device, ensure the power socket is easily accessible near the device.
- Disconnect the charger from the device and unplug it when charging is complete or not needed.
- If the device has a non-removable internal battery, do not attempt to replace it yourself to avoid damage to the battery or device. Batteries should only be replaced by authorized service centers.
- Dispose of this device, battery, and other accessories in accordance with local regulations, not as domestic garbage. Improper battery disposal may lead to battery explosions.
6. Privacy Protection
- Upgrading firmware and system with unauthorized third-party software may lead to device failure or personal information leakage.
- Online upgrading and downloading of matched official software are recommended.
- Please back up your personal information before upgrading, as your personal information may be removed during the process.
7. Safety Standards
Harmful Substance Content:
The content of harmful substances in this homogeneous material is below the limit of the GB/T26572 standard. The content of harmful substances in this homogeneous material at least exceeds the limit of the GB/T26572 standard. However, there is no better alternative at present. Thus, it meets the environmental protection requirement of EU RoHS.
EPUP (Estimated Period of Usefulness): The number indicated by this logo signifies a normal EPUP of 20 years. Some accessories may also have an EPUP logo, and the number on that logo prevails. This product may not include all accessories due to different types; the actual configuration is subject to the product received.
Spare part | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
---|---|---|---|---|---|---|
Device | ||||||
Charger | ||||||
Earphone | ||||||
Battery | ||||||
Cable |
Network Specifications
- GSM: 850/900/1800/1900MHz
- WCDMA: B1/B2/B5/B8
- LTE-FDD: B2/B3/B4/B7/B8/B12/B17/B28ab
FCC Caution
Part 15.21: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Part 15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Part 15.105: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement: This radio is designed for and classified as "General population/uncontrolled Use". The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
Body operation: This device was tested for typical body operations kept 0mm for body worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm distance for body worn.
Español
Esta sección contiene la información en español.
1. Para más información
Consultar la guía rápida que se encuentra dentro de la caja. Encienda el tableta y disfrute los siguientes servicios:
- Consultar el manual.
- Obtenga ayuda a través de varios canales, tales como autoservicio, preguntas y respuestas inteligentes, manual de servicio, preguntas y comentarios. Además, puede buscar tiendas, red y política de servicio.
- Abrir configuración > Acerca del tableta > Información legal, consulte información legal.
2. Apariencia del tableta.
- CONECTOR USB
- MANOS LIBRES
- CÁMARA
- TECLA DE VOLUMEN
- BOTÓN DE ENCENDIDO
- MICRÓFONO
- ALTAVOZ
Modelo: Star9 Max
Tipo: GUÍA RÁPIDA
3. Guía de inserción de la tarjeta.
Consejos:
- Preste atención a la dirección de inserción de la tarjeta SIM y Micro SD, como guía de imagen.
- Utilice la tarjeta Micro-SIM estándar. La inserción de una tarjeta no calificada puede dañar el soporte de la tarjeta SIM.
4. Configuración de red móvil
- Encienda el tableta con un largo toque de botón de encendido.
- Siga los consejos de la pantalla y entre en la pantalla de inicio.
- Configuración > Red e Internet > red móvil, abrir datos 4G.
5. Información de seguridad
- La fuente de alimentación, el cargador y la batería incompatibles o no autorizados pueden provocar incendios, explosiones u otros peligros. Solo se pueden utilizar los accesorios aceptados por los fabricantes. El no uso de estos accesorios puede causar accidentes y violar la garantía y las regulaciones nacionales relacionadas. Póngase en contacto con un centro de servicio autorizado para accesorios reconocidos.
- No utilice un volumen alto durante mucho tiempo para proteger la audición.
- Utilice el dispositivo a la temperatura de -20°C-70°C. Una temperatura demasiado alta o demasiado baja puede causar la falla del dispositivo.
- No exponga el dispositivo o la batería a lugares de alta temperatura o equipos que liberen calor, como la luz solar, el calentador, el horno microondas, el calentador de agua, etc. El sobrecalentamiento de la batería puede causar una explosión.
- Al cargar el dispositivo, la toma de corriente debe estar ubicada en lugares cercanos al accesorio del dispositivo.
- No deje el cargador conectado al equipo si éste ya ha cargado completamente. Cuando termine el proceso de carga, desconecte el cargador junto con el equipo.
- Si el dispositivo está equipado con una batería interna no extraíble, no reemplace la batería en caso de que la batería o el dispositivo sufran daños. La batería solo puede ser reemplazada por un centro de servicio autorizado.
- Este dispositivo, la batería y otros accesorios deben eliminarse de acuerdo con las regulaciones locales, en lugar de tratarlos como basura doméstica. El tratamiento inadecuado de la batería puede causar la explosión de la batería.
6. Protección de la privacidad.
- La actualización del firmware y el sistema con un software de terceros no autorizado puede causar una falla del dispositivo celular o una fuga de información personal.
- Se recomienda la actualización y descarga en línea del software oficial compatible.
- Haga una copia de seguridad de su información personal antes de actualizarla, ya que su información personal puede ser eliminada.
7. Normas de seguridad
Contenido de sustancias nocivas: El contenido de sustancias nocivas en este material homogéneo está por debajo del límite de la norma GB/T26572. El contenido de sustancias nocivas de este material homogéneo supera al menos el límite del estándar GB/T26572. Sin embargo, no hay mejor alternativa al reenviar. Por lo tanto, cumple con el requisito de protección ambiental de la UE ROHS.
EPUP (Período Estimado de Utilidad): El número de este logotipo indica que su EPUP normal es de 20 años. Algunos accesorios también pueden tener el logotipo de EPUP y el número del logotipo prevalece. Es posible que este producto no incluya todos los accesorios debido a diferentes tipos, y debe estar sujeto a la configuración real.
Pieza de repuesto | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
---|---|---|---|---|---|---|
Dispositivo | ||||||
Cargador | ||||||
Auricular | ||||||
Batería | ||||||
Cable |
Especificaciones de red
- GSM: 850/900/1800/1900MHz
- WCDMA: B1/B2/B5/B8
- LTE-FDD: B2/B3/B4/B7/B8/B12/B17/B28ab
Precaución de la FCC
Parte 15.21: Cualquier cambio o modificación no aprobado expresamente por la parte responsable del cumplimiento podría anular la autorización del usuario para operar el equipo.
Parte 15.19: Este dispositivo cumple con la parte 15 de las normas de la FCC. La operación está sujeta a las dos condiciones siguientes: (1) este dispositivo no puede causar interferencia dañina, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo la interferencia que puede causar operación no deseada.
Parte 15.105: Nota: este equipo ha sido probado y se ha comprobado que cumple con los límites para un dispositivo digital de clase B, de conformidad con la parte 15 de las normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias dañinas en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales para las radiocomunicaciones. Sin embargo, no hay garantía de que la interferencia no ocurra en una instalación particular. Si este equipo causa interferencia dañina a la recepción de radio o televisión, que puede determinarse apagando y encendiendo el equipo, se anima al usuario a tratar de corregir la interferencia por una o más de las siguientes medidas:
- Reorientar o reubicar la antena recept.
- Aumentar la separación entre el equipo y el receptor.
- Conecte el equipo a una salida en un circuito diferente al que está conectado el receptor.
- Consulte al distribuidor o a un técnico experimentado de radio/TV para ayuda.
Declaración de exposición a RF: Esta radio está diseñada para y clasificada como "población General/uso no controlado". Las guías están basadas en estándares que fueron desarrollados por organizaciones científicas independientes a través de la evaluación periódica y exhaustiva de estudios científicos. Las normas incluyen un margen de seguridad sustancial diseñado para garantizar la seguridad de todas las personas, independientemente de su edad o salud.
Funcionamiento del cuerpo: Este dispositivo fue probado para las operaciones típicas del cuerpo mantenido 0mm para el cuerpo desgast. Para mantener el cumplimiento de los requisitos de exposición a RF, use accesorios que mantengan un 0mm de desgaste corporal.