NGTeco SL01-A730N Smart Lock

Important Safety Instructions

1. Please read this Installation Guide carefully and contact Customer Care for any installation queries.
2. It is recommended that installation be carried out by a professional technician to prevent any potential service charges that can occur due to incorrect installation.
3. When the batteries are inserted in reverse positions, it may result in liquid leakage or damage.
4. DO NOT leave all mechanical keys indoors. It is recommended that at least one key be left in a safe place outside the home.
5. DO NOT attempt to disassemble or repair the device without authorization.
6. NGTeco regularly revises the contents of this Installation Guide and updates its products without prior notice to enhance quality and performance.

What's in the Box

The package includes the following components:

• Exterior Assembly (keypad and lever)
• Interior Assembly (battery compartment and internal mechanism)
• Strike Plate and Box (for door frame)
• Latch
• Latch Screws (x2)
• Spindle (connects interior and exterior mechanisms)
• Mounting Plate Studs
• Interior Assembly Screws
• IC Card (x2)
• Mechanical Key (x2)
• Silicone Plug (for covering screw hole)
• Installation Template (for marking holes)
• Installation Guide & User Manual

Component Specifications by Door Thickness:

Note: Screws and Studs for doors of thickness from 35 to 60 mm are included in the standard package. Please use the appropriate set of accessories as per your door's thickness to ensure the lock functions properly.

Installation Diagram

The installation diagram shows how the Exterior Assembly, Interior Assembly, Latch, Strike Plate and Box, Spindle, and Mounting Plate Studs are connected and mounted onto a door. The Battery Cover and Batteries are part of the Interior Assembly. The Silicone Plug covers a screw hole. Latch Screws secure the latch. A Mechanical Key is shown for manual override.

Installation Procedure

1. Check Door Properties

1.1 Measure the Door Thickness

Measure the door thickness and select the proper length of studs and screws. Refer to the table on the 'What's in the Box' page for details.

1.2 Check the Door Opening Direction

The position of the handle is determined by the door's opening direction. The following diagrams illustrate the directions relative to the user's location outside the room:

• Left Inward: Door opens inwards to the left.
• Right Inward: Door opens inwards to the right.
• Left Outward: Door opens outwards to the left.
• Right Outward: Door opens outwards to the right.

1.3 Change the Lever Direction (if needed)

1. Use a screwdriver to remove the screw securing the lever.
2. Rotate the lever 180° to the opposite direction.
3. Install and secure the lever with the screws.

2. Drill Holes on the Door

1. Align and tape the Installation Template at the desired lever height on the door.
2. Mark the locations for the holes to be drilled and then drill the marked places. The template indicates recommended positions for Door Thickness (35 to 60mm) and Backset (60 or 70mm), along with the Lever Centerline.

3. Install the Latch

Insert the Latch into the door and secure it with the provided Latch Screws (x2).

4. Install the Exterior Assembly

1. Install and secure the Mounting Plate Studs on the rear of the Exterior Assembly.
2. Insert the Spindle into the clutch, ensuring the triangle mark faces the notch.
3. Insert the cable through the designated hole, and then insert the Exterior Assembly into the corresponding holes on the door.

5. Install the Interior Assembly

1. Connect the cable to the port on the Interior Assembly.
2. Remove the battery cover, place the Interior Assembly properly on the door, and secure it with the Interior Assembly Screws. Ensure the correct screw (shorter or longer) is used based on the door thickness.

6. Install the Batteries and the Battery Cover

1. Insert four alkaline AA batteries (not included) ? and cover them with the Battery Cover.
2. Use the Silicone Plug to cover the screw hole at the bottom of the Interior Assembly.

7. Install the Strike Plate and the Box

1. Ensure the Strike Box is aligned with the latch bolt. Use the Installation Template to drill holes in the door frame.
2. Align the Strike Plate and the Box with the drilled holes and secure them with the provided Latch Screws.

8. Physical Test

8.1 Test Lever and Latch

1. Rotate the exterior lever downwards and check if the latch bolt remains in the locked position.
2. Rotate the interior lever downwards and check if the latch bolt remains retracted (unlocked) position.

8.2 Test Mechanical Key

Insert the Mechanical Key into the keyhole, rotate it 90°, then rotate the lever downwards to unlock the door.

Important Notes (User Manual)

1. Please carefully read this manual before operating the product.
2. NGTeco regularly updates this User Manual and its products without prior notice to enhance quality and performance.
3. Before registration, new locks can be unlocked by any authentication method by default.
4. Please ensure the device's Wi-Fi network remains stable; otherwise, it will shorten the battery life faster.
5. Four Alkaline AA Batteries (not included) are required to power the device. Non-alkaline and rechargeable lithium batteries ARE NOT RECOMMENDED.
6. Do not remove batteries from the lock while it is operating.
7. Batteries must be replaced immediately when the lock prompts the Low Battery Warning ?.
8. Do not keep all mechanical keys indoors. It is recommended that at least one key be left in a safe place outside the home.

Fingerprint Collection Tips:

Move different areas of your fingerprint ? to collect more details and place your finger to maximize the fingerprint sensor surface. This helps to improve the success rate of fingerprint verification.

Note: Please use the correct method when pressing your fingers onto the fingerprint reader for registration and identification. NGTeco assumes no liability for recognition issues resulting from incorrect usage. NGTeco reserves the right of final interpretation and modification concerning this point.

Product Specifications

Product Overview

The smart lock consists of the following components:

• Exterior Assembly: Features a Touch Keypad (0-9, *, #), Card Detection Area, Conrm & Doorbell Button, Fingerprint Sensor, Lever, and Mechanical Key Hole.
• Interior Assembly: Includes Battery Compartments, Reset Button, Lockout Mode Button, and the internal mechanism.
• Other Interfaces: USB Type-C Emergency Power Interface.

Product Features

• User Roles: Administrator (menu access, door opening) and User (door opening only).
• Initialization (Reset): Restores the device to factory settings, deleting all registered user data.
• Anti-Peeping Codes: Allows entry of random digits before or after the actual passcode for enhanced security. Passcode can be 6 digits; total entered digits up to 32.
• Doorbell: When the visitor presses the Doorbell Button (# Key) ? on the touch keypad, the lock will generate a doorbell sound and send a push notification via the App.
• Temporary Access: Generate temporary passcodes for visitors via the App, with customizable schedules.
• Passage Mode: Keeps the door unlocked at all times, suitable for areas with no access restrictions.
• Double Unlock Mode: Requires two different verifications to unlock the lock.
• Lockout Mode: Only the administrator can unlock from outside when this mode is enabled.
• Emergency Charging: A portable power bank can power the lock via the USB Type-C interface if the battery is depleted.
• Emergency Mechanical Key: Provides a manual override for unlocking in case of electronic malfunction.
• Consecutive Attempts Alarm: After 5 failed verification attempts, the method is locked out for 5 minutes.
• Low Battery Alarm: Prompts "Low power, replace the battery" when the battery level is low ?.

Lock Setup

Using the Lock in Standalone Mode

Configuration can be done using the NGTeco Home App or via programming instructions.

1. Register the First Administrator

1. Touch the keypad to activate the lock.
2. Press the [*] and [#] buttons, then input "123456#" to access the system menu.
3. Select "1 Add User > 1 Add Admin".
4. Press fingerprint six times, or enter a six-digit passcode twice.

2. Operate Other Features through Menu Mode

1. Touch the keypad to activate the lock.
2. Press the [*] and [#] buttons, and verify administrator's information to access the system menu.
3. Follow the audio guide and enter the digit corresponding to the desired function.

Note:

• The default administrator password is "123456".
• After any verification unlocks, the keypad lights up the "5" key. Press "5" to announce the number of that verification.
• You can press and hold the initialization button on the Interior Assembly for 6 seconds to enter forced initialization mode. After initialization, all user registration information will be cleared.

Connecting the Lock with App

1. Search for the "NGTeco Home" App on the iOS App Store or Google Play Store, or scan the QR code to download the App. Open the "NGTeco Home" App, register, and sign in.
2. Turn on Bluetooth and Wi-Fi on your smartphone and stay near the lock (within 10 meters without obstacles).
3. Tap the "+" button on the top right corner of the interface and select "Add Device".
4. Activate the lock and enter the system menu, select "4. Wireless Configure Setting > 2. Smart Connection".
5. Tap the "Add" button once the device pop-up appears on the App. Follow the on-screen instructions to connect the device automatically.

Attachment 1: Compliance Information

"Hereby, ZKTECO CO.,LTD declares that this Product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

"This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter."