Product Overview
This document provides assembly instructions for the VITTSJÖ coffee table by IKEA. It details the necessary parts, hardware, and step-by-step guidance for assembly.
The VITTSJÖ coffee table features a modern design with a glass top and a lower shelf, supported by a metal frame.
Tools Required
Assembly requires the following tools:
- Phillips head screwdriver [cross-head screwdriver]
- Flat-head screwdriver [flat-head screwdriver]
Important: Assemble on a soft surface like a rug or the provided packaging to prevent scratches. [caution]
Parts and Hardware
Please verify all parts and hardware are present before beginning assembly.
Components:
- Base Ring: 1x
- Legs: 4x
- Crossbars: 2x
- Shelf: 1x
- Glass Top: 1x
Hardware:
Based on assembly steps:
| Part Description | Part Numbers | Quantity Used in Steps |
|---|---|---|
| Screw Type A | 122158, 143131 | 8x (4x in Step 1, 4x in Step 3) |
| Screw Type B | 116654, 10074016 | 4x (in Step 2) |
| Screw Type C | 117494 | 4x (in Step 4) |
| Screw Type D | 107091, 123741 | 6x (in Step 5) |
Note: The initial parts list on page 2 may differ from the quantities used in specific assembly steps. The quantities listed above reflect usage in the visual instructions.
Assembly Steps
-
Step 1: Assemble Leg Structure
Connect the two crossbars to the four legs, forming an 'X' shape in the center. Secure each connection point using 4x of Screw Type A (part numbers: 122158, 143131).
[Diagram shows crossbars connecting to legs with screws.] -
Step 2: Attach to Base Ring
Attach the assembled leg and crossbar structure to the circular base ring. Secure using 4x of Screw Type B (part numbers: 116654, 10074016).
[Diagram shows the leg assembly being attached to the base ring with screws.] -
Step 3: Attach Shelf
Position the shelf onto the legs. Secure the shelf to the legs using 4x of Screw Type A (part numbers: 122158, 143131).
[Diagram shows the shelf being attached to the legs with screws.] -
Step 4: Attach Top Frame
Attach the upper frame structure that will support the glass top to the legs. Use 4x of Screw Type C (part number: 117494) for this step.
[Diagram shows the upper frame being attached to the legs with screws.] -
Step 5: Install Glass Top
Carefully place the glass top onto the assembled frame. Secure the glass top using 6x of Screw Type D (part numbers: 107091, 123741).
[Diagram shows the glass top being placed and secured with screws.] -
Step 6: Final Check
Ensure all screws are tightened and the table is stable.
[Diagram shows the completed VITTSJÖ coffee table.]
