MACHENIKE GX30PRO GAMING HEADPHONE
User Manual & Warranty Card
*Read manual before use. Keep for reference*
Package Lists
Headset/Headphone
2.4GHz, USB+type-c /Receiver
User Manual
Quick Start Guide
USB Type-C Cable
Overview
Detachable Earpads
Extendable Headband
Metal Bracket
LED Light
Microphone
Operating Instructions
Volume Control:
- Single click: Volume up
- Long press for 3 seconds: Next song
- Single click: Volume down
- Long press for 3 seconds: Previous track
Function Controls:
- Single click: Play/Pause, Answer/End call
- Double click: Enter Game Mode
- Triple click: Activate 7.1 Surround Sound
- Press and hold for 1.5 seconds: Reject call
- Press and hold for 3 seconds: Power on/off
- Press and hold for 8 seconds: Clear Bluetooth pairing information
- Single click: Mic mute
- Double click: Turn headset lighting on/off
- Press and hold for 3 seconds: Switch between 2.4GHz/BT
Charging Method
Note: Maximum Charging Input Voltage/Current: DC 5V / 1A. Rated Charging Input Voltage/Current: DC 5V / 1A
Connect Instruction
This product uses Bluetooth, 2.4GHz wireless, and USB-Type C connection technology.
Due to device system limitations, iOS, HarmonyOS, and Android devices sync volume with the headset by default (some Android models do not support this feature).
Connecting to a Phone/PC
- Press and hold the power button for 3 seconds to turn on the headset.
- Press and hold the lighting button for 3 seconds to switch to Bluetooth mode, then go to the Bluetooth connection interface on your phone and search for devices.
- Single click to select "MACHENIKE GX30PRO" to complete pairing.
- Your phone/PC device needs to confirm the pairing by clicking and accepting the pop-up window.
- Connect the PC with the USB-Type-C charging cable to support charging while in use.
Bluetooth Pairing Request Example:
Device name: MACHENIKE GX30PRO
Action: Click to connect, Agree to pair
Device A&B Function
| NO. | Function | Current State | Operating instructions |
|---|---|---|---|
| 1 | Simultaneous connection to two devices | 2.4GHz connection to device A | 1. Press and hold the light button for 3 seconds to switch to Bluetooth mode B, search for the headset, and pair directly. 2. Press and hold the light button for 3 seconds to reconnect to device A and simultaneously connect to device B. 3. In 2.4GHz mode, when both 2.4GHz and Bluetooth are connected simultaneously, if a phone call comes in, the call will take priority. |
| 2 | Automatically reconnect to two devices | Powered-off state | After connecting to two devices, power off the headset. When powered back on, both devices will reconnect simultaneously. |
| 3 | Cannot be discovered or connected to by a third device | Simultaneous connection to two devices | If the headset is actively disconnected from one of the devices, it cannot be discovered or connected to by a third device. |
| 4 | Can be discovered and connected to by a third device | Simultaneous connection to two devices | When both devices are disconnected, the headset can enter pairing mode. |
Expanded Explanation
2.4GHz Mode
Connection: Connect the headset to the USB port of the Mac computer.
Bluetooth Mode
Connection: Turn on the headset > Press and hold the lighting button for 3 seconds to switch to Bluetooth mode > Go to 'Bluetooth Connection Settings' > 'Search for Devices to Pair' > Confirm successful pairing > Ready for use.
While using Bluetooth mode, receiving 2.4GHz audio is not supported.
Compatible Devices
Supported Devices: Mobile Phone, Nintendo Switch, iPad, Laptop, Desktop, PS4/PS5
Connection Types: 2.4GHz Connection, Bluetooth 5.3 Connection, Type-C Wired Connection (USB/Type-c)
Disclaimer: This product only supports installing the 7.1 driver on the PC. The 7.1 virtual surround sound can only be used in 2.4GHz connection mode; Bluetooth/wired connections do not support the 7.1 virtual surround sound driver.
Product Specifications
| Brand Name | Product Model | Standard | |
|---|---|---|---|
| MACHENIKE | MACHENIKE GX30PRO | GB 4943.1-2022 | |
| Product Weight | 20*18*9.5cm | Frequency Response | 20Hz-20KHz |
| Input Voltage/Current | DC 5V-1A | Cable Length | ≈1.5m |
| Product Lighting Effect | Single Color |
Product Contains Hazardous Substances and Their Contents
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Printed Circuit Board Assembly | X | O | O | O | O | O |
| Shell and Accessories | O | O | O | O | O | O |
O: Indicates that the content of this hazardous substance in all homogeneous materials of the component is below the limit requirement specified in GB/T 26572.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of the component exceeds the limit requirement specified in GB/T 26572.
Components marked with "X" are due to the limitations of global technological development and cannot achieve the replacement of hazardous substances.
Printed Circuit Board Assembly: Includes printed circuit boards and their components, electronic components, etc. Depending on the product model, the product you purchased may not contain all these components.
Note: The number in the "10" logo represents the product's environmental protection use period under normal operating conditions.
MACHENIKE Product Warranty Commitment
1. Under the premise that the user uses this product correctly according to the technical instructions, the product is free to repair within one year from the date of purchase. The repair service method is to return the product to the factory for repair. Please scan the after-sales QR code on the product packaging for repair.
2. MACHENIKE does not provide free warranty services for faults caused by the following reasons of the user:
- (1) Faults caused by unauthorized disassembly or modification of the product;
- (2) Faults caused by accidental dropping, falling, liquid ingress, or non-compliance with power specifications during use or transportation;
- (3) Faults caused by lack of reasonable maintenance;
- (4) Failure to operate correctly according to the user manual;
- (5) Faults or damage caused by third-party products, services, or actions.
3. When requesting free warranty service, you must provide a clear, complete, and accurate sales invoice and warranty card. You can request the seller to provide the above sales invoice and warranty card when purchasing the product.
4. Out-of-warranty repair services will be charged according to regulations.
Warranty Card
Dear User:
Thank you for purchasing our company's product. Our company will provide warranty services in accordance with the "Consumer Rights Protection Law of the People's Republic of China" and the relevant regulations of the "Regulations on the Repair, Replacement, and Return of Certain Commodities" issued by the State Administration for Market Regulation, the State Administration for Industry and Commerce, and the Ministry of Finance. Please fill out this card carefully and keep it properly for future repairs.
Customer Name:
Contact Phone:
Mailing Address:
Product Name:
Purchase Date:
Purchase Channel:
Serial Number:
Email:
Postal Code:
Product Model:
Product Performance Failure Record
| Date of Submission | Description of Performance Failure | Engineer's Signature | Completion Date |
|---|---|---|---|
Notes:
- Please keep this card properly. It must be presented along with the proof of purchase for warranty service.
- The entire machine is free to repair for 1 year from the date of purchase, with the proof of purchase.
- The following situations are not covered by free service, but paid repair and lifelong service can be provided:
- 1) Unable to present the warranty instructions and invoice;
- 2) Invoice is tampered with;
- 3) Damage caused by accidents or improper use;
- 4) Damage caused by self-repair without our company's permission;
- 5) Exceeding the three-guarantee period, but can continue to be used after repair.
Product Environmental Protection Disposal Management Measures
MACHENIKE advocates for an environmentally friendly and low-carbon consumption experience. It is recommended that users who own this product should comply with national laws and regulations on the recycling and disposal of waste electrical and electronic products when they no longer need this product. Please hand it over to local qualified recycling and disposal companies for processing, to reduce resource waste and protect the natural environment of the Earth.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and receiver.
- -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- -Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Quality Inspection Certificate
Inspection Conclusion: Product has passed inspection and is approved for factory shipment.
