AIMIBO Wireless HD Transmitter & Receiver Kit
User Manual V2.0
Connection Diagram
Transmitter (TX)
- USB-C Power Supply Port (5V 2A)
- HDMI Output
- Function Button
- Indicator Light
Receiver (RX)
- USB-C and antenna two-in-one power supply port (5V 2A)
- HDMI Input
- Function Button
- Indicator Light
Hardware Casting
Wireless HDMI Receiver and Transmitter, Plug and Play.
Pairing Instructions
The product is pre-paired. If pairing fails, follow these steps:
- Connect transmitter and receiver to devices.
- Long press Receiver's back button for 3 seconds. The TV will display "Release the button to pair with EZCast TX".
- Long press Transmitter's middle button for 3 seconds. When the indicator light is off, release the button. The indicator light will flash quickly after restarting, and the TV will show "Pairing-OK".
One Receiver can be matched with 8 Transmitters. Switch by pressing the Transmitter's middle button. Each Transmitter needs to be paired with the Receiver.
Setup for Android
Method 1 (No need to set Step 1):
- Open phone settings, find the 'Cast' function.
- Select 'MiraScreen' as the target. (Cast function name may vary by brand: HUAWEI: Multi-screen Interactive; Xiaomi: Cast; OnePlus: cast).
Method 2 (Use Google Home):
- Ensure phone WiFi and device are on the same Home network.
- Open Google Home, wait for it to search for the device (RX-Bxxxxx), and click to mirror. Refresh if not found.
Direct Connect for iOS
- Connect your iPhone to your home Wi-Fi. Ensure both dongle and phone are on the same Wi-Fi.
- If the dongle fails to set, use iPhone/iPad's WiFi settings to find and connect to the MiraScreen hotspot (RX-Bxxxxx, Password: 12345678).
- Slide to the control center, click "Airplay Mirroring", then select RX-BXXXXXX.
Setup for iOS
- Connect your iPhone to your home Wi-Fi. Ensure both dongle and phone are connected to the same Home Wi-Fi.
- If the dongle fails to set Step 1, use iPhone/iPad's Setting WiFi, find the Hot Spot of MiraScreen and connect it (RX-BXXXXX Password: 12345678).
- Slide Screen and go to Apple's control center, click "Airplay Mirroring", then select RX-BXXXXXX.
For more models, contact customer service.
Connect to Home Router WiFi
When using for the first time, connect the device to your home router WiFi:
- On your phone, go to WiFi settings and connect to MiraScreen Wi-Fi (Name: RX-Bxxxxx, Default password: 12345678).
- Open a browser on your phone and input 192.168.203.1.
- Click 'Internet', choose your Home WiFi, input the password, and click 'Enter'.
This function applies to: iPhone/iPad/Android Devices.
Receiver-[RX] Connect Method
- Plug the external antenna into the Receiver and connect it to a TV or other HDMI input device.
- Plug the USB-C cable into a wall charger (5V/2A) or the TV's USB port.
- Switch the TV to the correct HDMI channel; a blue screen should appear.
- For first-time use, select the language by pressing the middle button of the Receiver, then long-press for 2-5 seconds to confirm. To change the language, long-press for 10 seconds to restore the system.
Transmitter-[TX] Connect Method
- Plug the Transmitter into a laptop or other HDMI output device.
- Plug the USB cable into a USB power port. The indicator light will turn on; wait 10 seconds for auto-sync.
Note: Some HDMI output ports can power the transmitter, eliminating the need for USB-C power.
Transmitter Indicator Status
- Slow Flash: Disconnected
- Fast Flash: Pairing
- Always On: Connected
Dose and Don'ts and Troubleshooting
- Ensure correct cable connections: external antenna for RX, USB-C for TX, and power both devices via USB.
- Transmission range may be reduced by solid walls or metal firewalls.
- If mirroring fails, try resetting the devices.
- This wireless HDMI kit does not support 4K mirroring from Windows. However, the Receiver alone can mirror 4K content to a TV.
Technical support email: Support@Aimibo.tv
FCC Warning
This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not explicitly approved by the manufacturer may void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body.
ISED Statement (Canada)
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation. The digital apparatus complies with Canadian CAN ICES-3(B)/NMB-3(B).
This device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numérique du ciem conforme canadien peut 3 (b) / nmb 3 (b).
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. Cet équipement est conforme aux limits d'exposition aux rayonnements du Canada établies pour un environnement nón contrôlé. Cet équipement est conforme Canada limits d'exposition aux radiations dans un environnement non contrôlé.
L'appareil destiné à fonctionner dans la bande 5150-5250 MHz est uniquement destiné à une utilisation en intérieur afin de réduire le potentiel d'interférences nuisibles aux systèmes mobiles par satellite cocanaux.
