JBL Charge 6 Quick Start Guide

What's in the Box

The package includes the JBL Charge 6 speaker and necessary accessories.

Bluetooth Pairing

To pair your device with the JBL Charge 6:

Turn on the speaker.
On your device, go to Bluetooth settings.
Select 'JBL Charge 6' from the list of available devices.
The speaker will indicate when it is connected.

Play

Enjoy your music through the JBL Charge 6.

Multi-Speaker Connection

Connect multiple JBL speakers for an enhanced audio experience.

App

Download the JBL PORTABLE app to configure your speaker and perform software upgrades.

Charging

Connect the speaker to a power source using the provided USB-C cable. A full charge takes approximately 3 hours.

Note: Use a power adapter that delivers between 5V and 20V (up to 3A) for optimal charging speed.

Powerbank Functionality

The JBL Charge 6 can also function as a power bank to charge other devices via its USB-C port.

Detachable Handle Strap

The speaker comes with a detachable handle strap for easy portability.

Waterproof & Dustproof (IP68)

The JBL Charge 6 is rated IP68, meaning it is protected against dust and can be submerged in water up to 1.5 meters for 30 minutes. Ensure all ports are sealed before exposure to liquids.

Warning!

With USB-C charging protection, a reminder sound will alert you to unplug if the connector detects water, salt, or any other chemicals. Do not charge your speaker until it is completely dry and clean. Charging when wet may damage the speaker.

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Do not expose the JBL Charge 6 to liquids without removing the cable connection. Do not expose the JBL Charge 6 to water while charging, as it may result in permanent damage to the speaker or power source.

Chemicals and salt in pools or the ocean can damage waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it is completely dry and clean.

Technical Specifications

Feature	Specification
Transducers	53 mm x 93 mm woofer, 20 mm tweeter
Output Power	30 W RMS for woofer, 10 W RMS for tweeter
Output Power (Max)	45 W (Max)
Power Input	Voltage: 5 - 20 V (5 V, 9 V, 12 V, 15 V, 20 V) Current: 3 A (Max)
Frequency Response	56 Hz - 20 kHz (-6 dB)
Signal-to-Noise Ratio	> 80 dB
Battery Type	Li-ion polymer 34 Wh (equivalent to 7.2 V / 4722 mAh)
Battery Charge Time	3 hours (12 - 20 V / 3 A)
Music Play Time	Up to 24 hours (dependent on volume level and audio content)
Connection Ports	USB-C (in / out)
Bluetooth® Version	5.4
Bluetooth® Profile	A2DP 1.4, AVRCP 1.6
Bluetooth® Transmitter Modulation	GFSK, π/4 DQPSK, 8DPSK
Bluetooth® Transmitter Frequency Range	2400 MHz - 2483.5 MHz
Bluetooth® Transmitter Power	< 12 dBm (EIRP)
Product Dimensions (W x H x D)	228.8 x 98.5 x 94 mm / 9.0" x 3.88" x 3.7"
Net Weight	0.99 kg / 2.18 lbs (with handle) 0.96 kg / 2.11 lbs (without handle)
Packaging Dimensions (W x H x D)	256 x 119 x 145 mm / 10.1" x 4.7" x 5.7"
Gross Weight	1.37 kg / 3.02 lbs
Maximum Operation Temperature	45 °C

Important Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This product is approved by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements. For more information, consult the Anatel website – www.anatel.gov.br. This equipment does not have the right to protection against harmful interference and cannot cause interference in properly authorized systems.

Note: According to Brazilian law no. 11.291, prolonged exposure to noise levels above 85dB can cause damage to the auditory system.

	JBL Charge 6 Portable Bluetooth Speaker Quick Start Guide and Specifications This document provides a quick start guide and technical specifications for the JBL Charge 6 portable Bluetooth speaker, covering setup, features, and important warnings.
	JBL Charge 6 Quick Start Guide and Specifications A comprehensive guide to the JBL Charge 6 portable speaker, covering setup, features, technical specifications, and important usage and safety information.
	JBL Charge 6 Portable Bluetooth Speaker User Manual & Specifications Comprehensive guide for the JBL Charge 6 portable Bluetooth speaker, covering setup, features, technical specifications, and important warnings. Learn how to pair, play, connect multiple speakers, and use the JBL Portable app.
	JBL Charge 5 Quick Start Guide: Bluetooth Speaker Features and Operation A comprehensive guide to setting up and using your JBL Charge 5 portable Bluetooth speaker, covering pairing, playback, PartyBoost, charging, powerbank functionality, and technical specifications.
	JBL Xtreme 4 Quick Start Guide: Setup, Features, and Specifications Get started quickly with the JBL Xtreme 4 portable speaker. This guide covers unboxing, Bluetooth pairing, multi-speaker connection, app usage, charging, powerbank functionality, waterproof/dustproof features, and detailed technical specifications.
	JBL Xtreme 3 Portable Bluetooth Speaker - Quick Start Guide and Specifications Learn how to set up and use your JBL Xtreme 3 portable Bluetooth speaker. This guide covers Bluetooth pairing, PartyBoost, charging, IP67 water resistance, and detailed technical specifications.
	JBL Charge 5 Quick Start Guide: Setup, Features, and Specifications Get started with your JBL Charge 5 portable Bluetooth speaker. This guide covers unboxing, Bluetooth pairing, playback, PartyBoost, app usage, charging, powerbank functionality, IP67 rating, and technical specifications.
	JBL Flip 7 Quick Start Guide and Specifications This document provides a quick start guide and technical specifications for the JBL Flip 7 portable speaker, covering setup, features, and important warnings.