TP-Link
Easy Managed Switch | Datasheet
TL-SG205PE
5-Port Gigabit Easy Managed Switch with 4-Port PoE+
Highlights
- 5× 10/100/1000Mbps RJ45 ports (4× 802.3at/af-compliant PoE+)
- 65W Power Budget, with up to 30W for each PoE port*
- Easy to Use: Supports plug-and-play for instant connectivity and simple configuration for additional features
- Centralized Cloud Management via the web or the app†
- Up to 250m PoE**, QoS, PoE Auto Recovery, and Port Isolation for reliable surveillance networking
- Automatic Loop Prevention, VLAN, and IGMP Snooping
- Fanless design for silent operation
- Durable metal casing and desktop/wall mounting design
Product Pictures
Front view of the TP-Link TL-SG205PE 5-Port Gigabit Easy Managed Switch. It shows 5 RJ45 Ethernet ports labeled 1 through 5. Ports 1-4 support PoE+. LEDs above each port indicate link speed and activity. A 'Power' LED and 'PoE Max' LED are also visible. Text indicates '4 × Gigabit RJ45 ports with PoE+' and '1 × Gigabit RJ45 port'.
Angled view of the TP-Link TL-SG205PE 5-Port Gigabit Easy Managed Switch. Dimensions are indicated: 98 mm (width), 99.8 mm (depth), and 25 mm (height). The switch features a durable metal casing and a fanless design.
Specifications
Hardware Features & Performance
| General | Model | TL-SG205PE |
|---|---|---|
| Interface | 5 10/100/1000Mbps RJ45 Ports | |
| Flash | 64 Mbit | |
| Port Standard | IEEE 802.3: Ethernet Media Access Control (MAC) Protocol IEEE 802.3i: 10BASE-T Ethernet; IEEE 802.3u: 100BASE-X Fast Ethernet; IEEE 802.3ab: 1000BASE-T Gigabit Ethernet; IEEE 802.3x: Flow Control IEEE 802.1p: Traffic Class Expediting and Dynamic Multicast Filtering IEEE 802.1q: Virtual Bridged Local Area Networks IEEE 802.1ab: Station and Media Access Control Connectivity Discovery (LLDP) | |
| PoE | PoE Standard | 802.3af/at |
| PoE Ports | 4, up to 30 W /per port | |
| PoE Power Budget | 65 W | |
| Performance | Switching Capacity | 10 Gbps |
| Packet Forwarding Rate | 7.4 Mpps | |
| MAC Address Table | 8K | |
| Packet Buffer | 4 Mbit | |
| Transmission Method | Store and Forward | |
| Jumbo Frame | 15 KB | |
| Physical & Environment | Power Supply | 53.5 VDC / 1.31A |
| Surge Protection | ±6 kV in common mode for Ethernet Ports | |
| ESD Protection | Air: ±8 kV, Contact: ±4 kV | |
| MTBF | 559597h @ 25°C | |
| Dimensions (W x D x H) | 3.9 × 3.9 × 1.0 in (99.8 × 98 × 25 mm) | |
| Fan Quantity | Fanless | |
| Installation | Desktop/Wall-Mounting | |
| Operating Temperature | 0 °C to 40 °C (32°F to 104 °F) | |
| Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) | |
| Operation Humidity | 10% to 90% RH, non-condensing | |
| Storage Humidity | 5% to 90% RH, non-condensing | |
| Certification | FCC |
Software Features
| Model | TL-SG205PE |
|---|---|
| SDN Support |
|
| L2 Features |
|
| L2 Multicast |
|
| VLAN |
|
| QoS |
|
| Management Features |
|
† These functions require the use of the Omada Controller. This switch supports PoE Auto Recovery under Standalone Mode (managed separately without a controller) and supports manual PoE Recovery under Controller Mode (centrally managed with a controller). QoS and Priority Mode are supported under Standalone Mode.
* PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors.
** The speed of the ports that support 250 m PoE transmission will be downgraded to 10 Mbps. Actual transmission distance may vary depending on the quality of the cables.
