Easy Managed Switch | Datasheet
TL-SG208E
8-Port Gigabit Easy Managed Switch
Product Overview
A front view of the TP-Link TL-SG208E switch is shown, featuring 8 RJ45 ports labeled 1 through 8. A 'Power' button/indicator is visible on the left. Above the ports, indicators for '1G' and '10/100M' are present, along with the model number 'TL-SG208E'.
Highlights
- 8 x 10/100/1000Mbps RJ45 ports
- Easy to Use: Supports plug-and-play for instant connectivity and simple configuration for additional features
- Centralized Cloud Management via the web or the app [footnote]
- VLAN, Port Isolation, Cable Test, QoS for reliable surveillance networking
- Automatic Loop Prevention and IGMP Snooping
- Fanless design for silent operation
- Durable metal casing and desktop/wall mounting design
Product Pictures & Dimensions
The TP-Link TL-SG208E switch is depicted from the front and from an angled perspective. Dimensions are provided: Width 158 mm, Depth 100.7 mm, and Height 25.4 mm.
Key Features Visualized:
- 8 x Gigabit RJ45 Ports
Specifications
Hardware Features & Performance
Category | Details | |
---|---|---|
General | Model | TL-SG208E |
Interface | 8 x 10/100/1000 Mbps RJ45 Ports | |
Flash | 64 Mbit | |
Port Standard |
|
|
Switching Capacity | 16 Gbps | |
Performance | Packet Forwarding Rate | 11.9 Mpps |
MAC Address Table | 8K | |
Packet Buffer | 4 Mbit | |
Transmission Method | Store and Forward | |
Jumbo Frame | 15 KB | |
Physical & Environment | Power Supply | 5 VDC/0.6 A |
Max Power Consumption | 2.7 W (110V/60Hz) | |
Max Heat Dissipation | 9.09 BTU/hr (110 V/60 Hz) | |
Standby Power Consumption | 0.9 W (110V/60 Hz) | |
Surge Protection | ±6 kV in common mode for Ethernet Ports | |
ESD Protection | Air: ±8 kV, Contact: ±4 kV | |
MTBF | 1141726h @ 25°C | |
Dimensions (W x D x H) | 6.2x4.0x1.0 in (158x100.7x25.4 mm) | |
Fan Quantity | Fanless | |
Installation | Desktop/Wall Mount | |
Operating Temperature | -5 °C to 45 °C (23 °F to 113 °F) | |
Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) | |
Operation Humidity | 10% to 90% RH, non-condensing | |
Storage Humidity | 5% to 90% RH, non-condensing | |
Certification | FCC |
Software Features
- SDN Support
-
- Support Hardware Controller, Software Controller, Cloud-Based Controller
- Automatic Device Discovery
- Batch Configuration
- Batch Firmware Upgrading
- Unified Configuration
- L2 Features
-
- Link Aggregation
- Static Link Aggregation
- Up to 2 aggregation groups and up to 4 ports per group
- Loopback Detection
- Flow Control (802.3x Flow Control)
- Mirroring
- Port Mirroring
- One-to-One
- Many-to-One
- Ingress/Egress/Both
- Port Statistics
- Port Mirror Status
- Traffic Statistics
- 802.1ab LLDP
- Link Aggregation
- L2 Multicast
-
- IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Fast Leave
- IGMP Snooping
- VLAN
-
- MTU VLAN
- Port-Based VLAN
- 802.1Q Tag VLAN
- Max 32 VLAN Groups
- 4K VID
- QoS
-
- 802.1p DSCP Priority
- 8 Priority Queues
- Priority Schedule Mode (WRR - Weighted Round Robin)
- Queue Weight Config
- Bandwidth Control (Port-Based Rating Limit)
- Storm Control
- Multiple Control Modes (kbps/pps)
- Broadcast/Multicast/Unknown-Unicast Control
- Management Features
-
- Web-based GUI
- DHCP Client
- Cable Diagnostics
[footnote] These functions require the use of the Omada Controller. Cable Test is supported under Controller Mode.
© 2025 TP-Link