Highlights
- 16× 10/100/1000Mbps RJ45 ports
- Easy to Use: Supports plug-and-play for instant connectivity and simple configuration for additional features
- Centralized Cloud Management via the web or the app†
- VLAN, Port Isolation, Cable Test^, QoS for reliable surveillance networking
- Automatic Loop Prevention and IGMP Snooping
- Fanless design for silent operation
- Durable metal casing and desktop/rack mounting design
Product Pictures
A front view of the TP-Link TL-SG216E Easy Managed Switch, showing the 16 RJ45 ports, status LEDs, power button, and reset button.
An angled view of the TP-Link TL-SG216E switch, with dimensions indicated: 294 mm width, 140 mm depth, and 44 mm height.
Specifications
Hardware Features & Performance
Category | Feature | Details |
---|---|---|
General | Model | TL-SG216E |
Interface | 16× 10/100/1000 Mbps RJ45 Ports | |
Flash | 64 Mbit | |
Port Standard |
|
|
Performance | Switching Capacity | 32 Gbps |
Packet Forwarding Rate | 23.8 Mpps | |
MAC Address Table | 8K | |
Packet Buffer | 4 Mbit | |
Transmission Method | Store and Forward | |
Jumbo Frame | 15 KB | |
Power Supply | 100-240V~50/60Hz | |
Physical & Environment | Max Power Consumption | 8.4 W (110V/60Hz) |
Max Heat Dissipation | 28.52 BTU/hr (110 V/60 Hz) | |
Standby Power Consumption | 4.2 W (110V/60 Hz) | |
Surge Protection | ±6 kV in common mode for Ethernet Ports | |
ESD Protection | Air: ±8 kV, Contact: ±4 kV | |
MTBF | 2131140h @ 25°C | |
Dimensions (W x D x H) | 11.6 × 5.4 × 1.7 in (294×140×44 mm) | |
Fan Quantity | Fanless | |
Installation | Desktop/Rackmoutable | |
Environment | Operating Temperature | -5 °C to 50 °C (23 °F to 122 °F) |
Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) | |
Operation Humidity | 10% to 90% RH, non-condensing | |
Storage Humidity | 5% to 90% RH, non-condensing | |
Certification | FCC |
Software Features
Category | Feature | Details |
---|---|---|
Model | TL-SG216E | |
SDN Support | Controller Support | Support Hardware Controller, Software Controller, Cloud-Based Controller |
Device Management | Automatic Device Discovery | |
Configuration | Batch Configuration | |
Firmware | Batch Firmware Upgrading | |
Unified Configuration | Unified Configuration | |
L2 Features | Link Aggregation |
|
Loopback Detection | Loopback Detection | |
Flow Control | 802.3x Flow Control | |
Mirroring |
|
|
Port Statistics |
|
|
Discovery Protocol | 802.1ab LLDP | |
L2 Multicast |
|
|
VLAN | MTU VLAN | MTU VLAN |
Port-Based VLAN | Port-Based VLAN | |
802.1Q Tag VLAN |
|
|
Priority Queues | 8 Priority Queues | |
QoS | 802.1p DSCP Priority | 802.1p DSCP Priority |
Priority Schedule Mode | WRR (Weighted Round Robin) | |
Queue Weight Config | Queue Weight Config | |
Bandwidth Control | Port-Based Rating Limit | |
Storm Control |
|
|
Management Features | Interface | Web-based GUI |
DHCP | DHCP Client | |
Diagnostics | Cable Diagnostics |
† These functions require the use of the Omada Controller.
^ Cable Test is supported under Controller Mode.
© 2025 TP-Link