CONTENTS
- 01 Package Contents
- 02 Installation
- 03 Download software
- 04 Connecting to Print
- 05 Control panel
- 06 Specifications
- 07 Safety Precautions
01 Package Contents
- Smart Label Printer *1
- Label Paper Roll *1
- USB Type-C Cable *1
- Product Manual *1
02 Installation
Step 1: Power On
Press and hold the power button for 2-3 seconds to turn on the device.
Step 2: Open Compartment
Press the paper compartment release button to open the paper compartment.
Step 3: Adjust Roll Holders
Slide the roll holders to adjust.
Step 4: Load Label Paper
Load the label paper into the device's paper compartment so that a small part is protruding.
Distinguish the sides of the paper roll. It will not print if the paper roll is reversed.
Note: The label paper should be inserted with the printing side face down in the paper compartment.
03 Download software
01. Download the app
To use this product, please download and install the NIIMBOT app, available from Google Play or the App Store on Apple devices.
NIIMBOT Design & Print APP, easy to download and use.
More instructions can be viewed in the NIIMBOT app: Sign in to NIIMBOT, Me, Help Center, Hardware.
02. Download computer version
Visit the software downloads page on NIIMBOT's official website (www.niimbot.com) to download and install the computer version of "NIIMBOT".
Note: To connect a computer to this device, please use the officially provided data cable or a data cable that supports data transmission.
04 Connecting to Print
Step 1: Enable Bluetooth
Once the app has downloaded, make sure your phone's Bluetooth is turned on. Note: Location permissions may need to be enabled on Android phones.
Turn on Bluetooth ?
Step 2: Connect via App
Open the app and search for Bluetooth devices to connect to. Note: If it asks for a PIN, enter 0000 or 1234 then press OK.
Step 3: Go to Drawing Board
Once successfully connected, go to the Drawing Board.
Note: The illustrations of products, accessories, software interfaces, etc. in this getting started guide are illustrative in nature and for reference only. Due to product updates and upgrades, the physical product may differ slightly from the illustrations. Please refer to the actual physical product in such case. The product is subject to technical improvements without notice.
05 Control panel
User Interface
Bluetooth connection status
Device information
Paper type
USB connection icon
Device ID: B3S_P-AB01000001
Battery charge
Connected
Interval
Black mark
Transparent
The icon flashes when the battery is charging.
Connected to computer
Paper types
Interval: There is a space between two label sheets.
Black mark: Two label sheets are connected, and there is a black mark on the back of the label paper.
Transparent: The label paper is made from a transparent material.
Operating Instructions
1. Power/menu button: For selecting the function menu.
2. Paper feed/selection button: For selecting functions.
Function description
| Level 1 menu | Level 2 menu | Level 3 menu | Description |
|---|---|---|---|
| Paper Calibration | -- | -- | Use this function to calibrate the paper in the event of a paper feed fault. |
| Print density | 1, 2, 3, 4, 5 | -- | Set the density of printed content |
| Print testing page | -- | -- | Print device and material information |
| Automatic power-off | 15 minutes 30 minutes 60 minutes Never | -- | Set the automatic power-off time |
| Printer information | Hardware version no., firmware version no., Bluetooth MAC address | -- | The printer's hardware and firmware version numbers |
| Advanced settings | Language | Simplified Chinese/ Traditional Chinese/ English | Set the language for the onscreen content |
| Paper type | Interval Black mark Transparent | Set the type of label paper you are using. | |
| Restore factory settings | -- | Restore to factory settings with one touch |
06 Specifications
| Product | Label Printer | Model | NIIMBOT B3S_P |
| Dimensions | 118*112*59mm | Weight | 388g |
| Charging Time | 3 - 4 hours | Input | 5V DC, 2A |
| Battery Capacity | 2000mAh | Printing Method | Thermal printing |
| Printing Resolution | 203dpi | Printing Width | 72mm |
| Connectivity | Bluetooth, Type-C | Charge | Type-C |
| Transmit Power | 4dBm(Maximum) | Operating Temperature | 0°C - 40°C |
07 Safety Precautions
Read all instructions and warnings in this guide carefully before using the product to ensure proper and safe use of the product and to avoid personal injury or damage to property.
Warning
- Do not disassemble the product yourself. [tool icon] No returns or exchanges will be authorized for disassembled products.
- Do not use corrosive chemical products or cleaners to wipe down the product. [cleaning product icon]
- Do not use the product in the vicinity of flammable substances such as in gas stations, fuel depots, etc. [flammable substance icon]
- Keep the product and accessories in a safe place that is inaccessible to children, or only allow use under the supervision of a guardian.
- Immediately disconnect the product from the power source if the product enters water.
- Immediately disconnect the product if the device malfunctions.
- If you use a power adapter to charge (or power) the device, you must purchase an adapter that is safe, compliant, and meets the standards.
- Do not disassemble the product to replace the battery yourself. Incorrectly replacing the battery can result in an explosion.
- The battery contains special protective circuitry and devices. Do not disassemble the battery as this may cause short circuits or electrolyte leakage. If electrolytes accidentally enter your eye, rinse immediately with clean water and seek medical advice.
- Do not expose the appliance or power adapter to high-temperature or high-humidity environments, or put in water, to prevent short circuits that can cause the battery to become hot, smoke, deform, get damaged or even explode.
- Disconnect the power adapter immediately if you notice either smoke or a smell coming from the product or the power adapter, taking care to avoid burns.
Important
Please purchase the version of the product that matches your region or country of use through the NIIMBOT official store or a NIIMBOT authorized sales agent. Purchasing the product through other channels may mean you buy a pirated product or a product not adapted to your region or country of use which may lead to usage issues. In such cases, NIIMBOT may be unable to provide you with further assistance.
Notice: If the device cannot be turned on, please charge for one hour.
Manufacturer Information
Wuhan Jingchen Intelligent Identification Technology Co., Ltd.
Support Email: service@niimbot.com
Official Website: www.niimbot.com
Manufacturer's Address: No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China.
© 2024 NIIMBOT. All Rights Reserved.
NIIMBOT is a brand under Wuhan Jingchen Intelligent Identification Technology Ltd.
NIIMBOT Official Website - The simpler ,The better
