ResMed Mouthpiece Ventilation Support Arm User Guide

Intended Use

The Mouthpiece Ventilation (MPV) support arm holds a mouthpiece close to the patient mouth and provides guidance for the ventilation circuit.

Use Case

The MPV support arm is intended to be used by patients who need intermittent or continuous ventilator support and who can be treated successfully on mechanical ventilation through a mouthpiece as determined by a qualified physician. This includes, but is not limited to patients in wheelchairs, beds, in home, institution/hospital and portable applications.

For a full list of compatible devices for the support arm, see the Ventilation Accessories on www.resmed.com on the Products page under Ventilation Devices. If you do not have internet access, please contact your ResMed representative.

General Cautions

⚠️ CAUTION

• Read the entire guide before using the MPV support arm.
• Do not use the MPV support arm if it is damaged.

ℹ️ NOTE Please refer to your circuit, device or mouthpiece user guide for full details regarding correct use.

Components

Refer to illustrations A and B.

• 1. Extension for mouthpiece
• 2. End clip
• 3. MPV support arm
• 4. Velcro® straps (e.g., for coaxial circuits)
• 5. Clips for circuit fixation (compatible with 15 (0.6") and 22 mm (0.9") circuits by ResMed)
• 6. Clamp
• 7. Hex key

[Diagram Description for Figure A: Diagram showing the components of the MPV support arm and their assembly. It labels parts: 1. Extension for mouthpiece, 2. End clip, 3. MPV support arm, 4. Velcro® straps, 5. Clips for circuit fixation, 6. Clamp, 7. Hex key.]

[Diagram Description for Figure B: Diagram illustrating the correct positioning of the MPV support arm with the mouthpiece near the patient's mouth and the circuit attached.]

Assembly

Refer to illustration A.

1. Put the MPV support arm [3] in one of the clamp holes and tighten the screw with the hex key [7].
2. According to the patient circuit configuration: Fix the end clip [2] to the MPV support arm or fix the extension [1] to the MPV support arm.
3. Fix the appropriate clip(s) and/or velcro strap(s) on the MPV support arm.
4. Fix the clamp [6] to the support (e.g., wheelchair).

⚠️ CAUTION

• Check that the MPV support arm is securely fixed to its support prior to use. When attaching to metal tubing, attach the clamp on a straight section to ensure a secure fit.
• Make sure that the mouthpiece is positioned well within the patient's reach and movement capabilities at all times.

Refer to illustration B.

5. Connect the circuit to the mouthpiece and fix the complete patient circuit to the support arm with the assembled clip(s) and/or velcro strap(s).

ℹ️ NOTE For any serious incidents that occur in relation to this device, these should be reported to ResMed and the competent authority in your country.

Cleaning

The MPV support arm can be cleaned using an anti-bacterial solution on a clean, non-dyed disposable cloth. The following disinfectants are compatible for cleaning the MPV support arm:

• Actichlor Plus
• Bleach (1:10) (May also be known as 'dilute hypochlorite')
• Isopropanol
• Cavicide
• Mikrozid
• Teepol

Disposal

The support arm and packaging does not contain any hazardous substances and may be disposed of with your normal household refuse.

Technical Specifications

ℹ️ NOTE The manufacturer reserves the right to change these specifications without notice.

Symbols

The following symbols may appear on the device or packaging:

• ⚠️ Indicates a Warning or Caution
• ℹ️ Consult operating instructions
• LOT Batch Code
• REF Catalogue Number
• Manufacturer
• [EC REP] European Authorized Representative
• CE CE Labelling
• Importer
• MD Medical device

See symbols glossary at www.resmed.com/symbols.

Limited Warranty

ResMed warrants that your MPV support arm shall be free from defects in material and workmanship for a period of 90 days from the date of purchase by the initial customer. This warranty is not transferable.